Hi All,
I just read the post by Bill Schmidt, K9HZ, who defended the RM Italy HLA
series amps as not being as bad as many folks seem to think. I had posted
a similar response earlier, but thought I should add some substance to my
defense (and perhaps to Bill's).
I think much of the confusion
Hoping to make an announcement by mid-December:
http://www.kl7uw.com/kits.htm
I need to have a production quote on my six-band LP filter pc board.
73, Ed - KL7UW
__
Elecraft mailing list
Home:
Hi Again All,
I was just informed by private email that the Ten-Tec 418 amp will NOT do
QSK! That astounds me! I just assumed it did I guess. I'm no designer,
but I didn't think QSK was all that hard to incorporate--especially in an
amp that seems to be priced in the full feature price
Once more!
Man, this is like a tennis match! O.K. The word is in--and this time it's
from Paul Clinton, Service Manager at Ten-Tec. The 418 amp WILL do QSK!
Whew! Now I feel better! Kind of strange, though, that they don't make
that absolutely clear in their brochure.
Dave W7AQK
The KXPA100 amp will be full QSK, using silent PIN-diode keying.
73,
Wayne
N6KR
http://www.elecraft.com
On Nov 11, 2012, at 6:30 PM, Dyarnes w7...@cox.net wrote:
Hi Again All,
I was just informed by private email that the Ten-Tec 418 amp will NOT do
QSK! That astounds me! I just
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of M5FRA - Colin
Sent: Wednesday, November 07, 2012 9:35 AM
To: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] Small HF amp suggestions
My thoughts also.
Colin - G8FRA/M5FRA
On 11/10/2012 10:18 AM, Dr. William J. Schmidt, II wrote:
...and produces 100 watts from 1.8 watts input ...
Hmmm ... that would be 17.4 dB gain. Part 97.317(c)(6) isn't exactly
the easiest set of rules to understand but I think the max gain
permitted in an external RF amplifier for US
On 11/11/2012, at 6:24 AM, Fred Jensen k6...@foothill.net wrote:
On 11/10/2012 10:18 AM, Dr. William J. Schmidt, II wrote:
...and produces 100 watts from 1.8 watts input ...
Hmmm ... that would be 17.4 dB gain. Part 97.317(c)(6) isn't exactly
the easiest set of rules to understand but I
That is not correct. All new commercial HF Amplifiers sold for the amateur
service must be certified under Part 97.
73,
Eric
www.elecraft.com
_..._
On Nov 10, 2012, at 11:48 AM, Matt VK2RQ matt.vk...@gmail.com wrote:
On 11/11/2012, at 6:24 AM, Fred Jensen k6...@foothill.net wrote:
On
To clarify - In the US market..
Eric
www.elecraft.com
_..._
On Nov 10, 2012, at 1:21 PM, Eric Swartz WA6HHQ - Elecraft e...@elecraft.com
wrote:
That is not correct. All new commercial HF Amplifiers sold for the amateur
service must be certified under Part 97.
73,
Eric
;
reti...@easystreet.netreti...@easystreet.net
Subject: Re: [Elecraft] Small HF amp suggestions
I would be careful with the RM Italy amps. I have not been able to get mine to
operate properly with the KX3 in my mobile. Lots of spurious RF issues and we
are super well grounded with ferrites
;
reti...@easystreet.netreti...@easystreet.net
Subject: Re: [Elecraft] Small HF amp suggestions
I would be careful with the RM Italy amps. I have not been able to get mine
to operate properly with the KX3 in my mobile. Lots of spurious RF issues and
we are super well grounded with ferrites
Try to find a Yaesu FL-110.
David
KD4NUE
Sent from my Verizon Wireless Phone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
, 6 Nov 2012 19:17:02
To: Jack Berrywe...@yahoo.com
Cc: elecraft@mailman.qth.netelecraft@mailman.qth.net;
reti...@easystreet.netreti...@easystreet.net
Subject: Re: [Elecraft] Small HF amp suggestions
I would be careful with the RM Italy amps. I have not been able to get mine
to operate
My thoughts also.
Colin - G8FRA/M5FRA
m5fra.org.uk http://www.m5fra.org.uk
-- Original Message --
From: Tim Hague m0...@yahoo.co.uk
Wouldn't touch anything from RM, very poor performance and quality.
Expanded CB designs, no support. The only thing going is they are
From: Keith Heimbold ag...@hotmail.com
To: Jack Berry we...@yahoo.com
Sent: Wednesday, November 7, 2012 9:22 AM
Subject: Re: [Elecraft] Small HF amp suggestions
Tokyo high power sells the following amp. It is expensive but has good power
output and is highly rated on eham. The only issue
, 2012 9:17:57 AM
Subject: Re: [Elecraft] Small HF amp suggestions
Does anyone else have any experience with this amp?
a 'kosher ham'
Robert
-Original Message-
From: Keith Heimbold ag...@hotmail.com
Sender: elecraft-boun...@mailman.qth.net
Date: Tue, 6 Nov 2012 19:17:02
To: Jack
From: Keith Heimbold ag...@hotmail.com
To: Jack Berry we...@yahoo.com
Sent: Wednesday, November 7, 2012 9:22 AM
Subject: Re: [Elecraft] Small HF amp suggestions
Tokyo high power sells the following amp. It is expensive but has good power
output and is highly rated on eham. The only
...@hotmail.com
To: Jack Berry we...@yahoo.com
Sent: Wednesday, November 7, 2012 9:22 AM
Subject: Re: [Elecraft] Small HF amp suggestions
Tokyo high power sells the following amp. It is expensive but has good power
output and is highly rated on eham. The only issue is that you have to order
it from
On Nov 7, 2012, at 10:37 AM, Jack Berry wrote:
That's a little steep for a mobile amp I think. I'm sure it's a good
quality amp but I only want up to 200 watts max for mobile use. I
may be out of touch, but I think ~$2/watt should produce a reliable
amp of less than 200 watts.
God
Hi All,
I have a RM Italy HLA150, but I haven't tried it yet with the KX3. I've
been using another amp, the THP HL50B, which works quite well. Not QSK
though. It has good RF sensing, and gives me abut 60 watts or a bit more.
It isn't auto band-switching either, but otherwise it has been an
Thanks for the responses.
Looks like RM Italy is an option for mobiling with the KX3 and a mid range
power boost. All others seem to weigh in too heavily in power and cost. Unless
a KPA100 is available sooner than expected, will either delay the KX3 or pick
up the RM Italy.
On Nov 6, 2012,
I would be careful with the RM Italy amps. I have not been able to get mine to
operate properly with the KX3 in my mobile. Lots of spurious RF issues and we
are super well grounded with ferrites/torroids everywhere.
For now I am putting in an older Icom mobile until the 100W amp from elecraft
23 matches
Mail list logo