Rich,
Rather than attempting to walk you through the steps to bypass the KDSP2 (it
is in the KDSP2 menu which is kicked in with the DISPLAY button, not AFIL).
I suggest you drag out the KDSP2 manual and follow the instructions to put
it into bypass state. Actually, I never remember the exact sequ
Well to start, I dont see a AFIL in the K2 menu and dont see any
switches, jumpers, etc on the DSP board.
Put the DSP in BYPASS mode.
73,
Lyle KK7P
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the l
Old age must be kicking in :(
I originally aligned the K2 using Spectrogram and it worked great.
I am doing a realignment and am lost.
I am running a DSP unit and it appears that Toms instructions say that if
you are running either DSP or Audio options you need to turn the AFIL off in
the K2
Dan,
The BFO settings in the manual are only a starting point. You have to
refine them for your particular K2. Since you already have the N-gen and
Spectrogram, you have all the tools you need for the task.
For detailed instructions on setting your filter/BFOs, look at my website
www.qsl.ne
, November 05, 2004 8:11 PM
Subject: [Elecraft] Spectrogram help
I must be doing something wrong. Have my BFO settings exactly as
specified in the K2 manual on CW. Using the noise gen from Elecraft.
However, during the BFO settings per the K2 manual, FL2-FL4 at the BFO
settings they specify resul
I must be doing something wrong. Have my BFO settings exactly as
specified in the K2 manual on CW. Using the noise gen from Elecraft.
However, during the BFO settings per the K2 manual, FL2-FL4 at the BFO
settings they specify results in almost no audio coming from the speaker
using the N-gen. T
6 matches
Mail list logo