Re: [Elecraft] What is this "interference" displayed in P3 ? It moves along with VFO

Two possible causes for spurious signals on the P3 are 1) A bad coax jumper with a non-continuous shield (Elecraft had some at some point) , and 2) paint on the inside of the enclosure where the parts are joined. Try a new jumper cable and make sure the mating surfaces of the enclosure are sa

Re: [Elecraft] What is this "interference" displayed in P3 ? It moves along with VFO

Could you describe what you are seeing - or, perhaps send a picture? I had problems early on with my P3 and it was just a lousy patch cable (between the K3 and the P3). I replaced the patch cable and all has been fine since then. Bill W2BLC ___

Re: [Elecraft] What is this "interference" displayed in P3 ? It moves along with VFO

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: ht

[Elecraft] What is this "interference" displayed in P3 ? It moves along with VFO

I have noticed something the past couple of weeks... there is sometimes some type of signal showing up on the P3 that moves with the VFO.. 1. note VFO @ 225 and Mkr A 237.95 2. mkr now at 237.95 - note signal 252.15