manuals, see www.ke7x.com
From: elecraft-boun...@mailman.qth.net on
behalf of John Clemmer
Sent: Tuesday, July 17, 2018 12:44 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Band switching with the KPA 500
Good afternoon. Reading the manual while I am waiting
Good afternoon. Reading the manual while I am waiting for parts. will be here
tomorrow. I see that there is auto band switching available. I will be using
a flex 6400M with the KPA and the KAT 500. I see that it talks about an aux
cable. Is this cable needed to accomplish band auto band sw
Hi, OM:
Try using the " K3 Freq Memory Editor " available here:
http://www.elecraft.com/K3/FreqMemEdit/K3_Freq_Mem_Editor.htm
Enter frequencies you want to store, and then you can frequency-hop with the
mouse or the button-sequence " press M>V then turn A knob then press M>V
again ".
Hth.
Brgd
I use the quick memories, M1 - M2, and have a CW and SSB start frequency
as recommended in the "Owner's Manual" on page 16
John
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/m
arl Ahamer
Sent: Sunday, September 11, 2011 5:25 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] band switching
Hi all,
I sometimes listen outside the ham bands to some broadcast station.
Let's say on 13.500Mhz and then go to another ham band and then want to came
back to the 20m band.Us
Karl,
No, but Direct Frequency Entry will put you on any frequency you want.
73,
Don W3FPR
On 9/11/2011 8:24 PM, Karl Ahamer wrote:
> Hi all,
>
> I sometimes listen outside the ham bands to some broadcast station.
>
> Let's say on 13.500Mhz and then go to another ham band and then want to came
>
Hi all,
I sometimes listen outside the ham bands to some broadcast station.
Let's say on 13.500Mhz and then go to another ham band and then want to came
back to the 20m band.Using the up/down controls it will come up with
13.500Mhz (the frequency used last on this band)so I have to tune all the
w
7 matches
Mail list logo