Since I installed the latest software on KSB2 I realize frequently low
batt message at the diplay of my K2.
Anyone got the same problem or have an idea?
Ser.Nr. 1020,
Greetings out of the snowy cold northern Bavaria.
73 de DG9NCL
___
I expect there is really nothing wrong.
It is most likely that you bumped the 'display voltage' slide switch on the
top of the Control Board during the firmware install. Check and move it
back to the INT position. I believe it will 'cure' the problem.
Newer K2s (3000+) have a jumper instead
Norbert Roedel wrote:
Since I installed the latest software on KSB2 I realize frequently low
batt message at the diplay of my K2.
Anyone got the same problem or have an idea?
Ser.Nr. 1020,
Did you accidentally bump the slide switch S1 near the top of the control board
when you had the
Thanks guys!
(not only) Jim wrote
Make sure that the Voltmeter switch (S-1) located on the top left side of
the Control Board is in the INT(12V) position. It is very easy to bump it
into the EXT position while installing the KSB2.
73
Jim Younce K4ZM
K2 SN: 18
What a crazy
Tom,
The 'problem' has already been fixed - the later K2s use a jumper instead of
the switch. For those having older K2s, simply removing the switch and
adding a jumper will disable the switch function. I don't think many folks
use the external voltmeter function of the K2 - but I have not
]
To: Norbert Roedel [EMAIL PROTECTED]
Cc: elecraft@mailman.qth.net elecraft@mailman.qth.net
Date: Sunday, January 16, 2005 11:39 AM
Subject: Re: [Elecraft] frequently low batt
Norbert Roedel wrote:
Since I installed the latest software on KSB2 I realize frequently low
batt message at the diplay of my
6 matches
Mail list logo