Thanks Vic,
I should take a look at the Idiom Press devices.
Can't hurt to have one more keyer ;^D
On Fri, 17 Apr 2009 12:26 -0700, "Vic K2VCO" wrote:
> dw wrote:
>
> > Before rolling my own, I talked to one designer who provides updates for
> > his keyer device.
> > And he got all holier-than-t
So do my keys, Cookie, Hi!
It seems to me we're seeing a rapid bifurcation of 'CW' (Morse) operators.
There are those Morse operators who can send and read CW sent by hand or by
keyer, and there are those who use Morse as an alternative digital mode to
be encoded and decoded by machine just like
Keying with the left foot will have the same pole changing effect.
On Apr 17, 2009, at 1:44 PM, Wes Stewart wrote:
>
>
> --- On Fri, 4/17/09, Steve Ellington wrote:
> [snip]
>
> The best antenna for CW is a Windom. The dits and dahs
>> automatically
>> flow to the appropriate side of the feedpo
--- On Fri, 4/17/09, Steve Ellington wrote:
[snip]
The best antenna for CW is a Windom. The dits and dahs
> automatically
> flow to the appropriate side of the feedpoint which insures
> proper
> transmission ratio. Just be certain your Windom is fed at
> the 1/3 point. If
> both receiving a
dw wrote:
> Before rolling my own, I talked to one designer who provides updates for
> his keyer device.
> And he got all holier-than-thou on me when he understood that I wanted
> width control for all three elements.
>
> My last cw rig utilizes the Curtis weighting schema and the dits were
> too
n...@carolina.rr.com
- Original Message -
From: "WILLIS COOKE"
To: "Elecraft_List" ; "dw"
Sent: Friday, April 17, 2009 1:53 PM
Subject: Re: [Elecraft] keying ration control
>
> My MESCO (Manhatten Electric Supply Company) Key built circla 1910
My MESCO (Manhatten Electric Supply Company) Key built circla 1910 has infinite
dit-dah space ratio control. Manual of course.
Willis 'Cookie' Cooke
K5EWJ
--- On Fri, 4/17/09, dw wrote:
> From: dw
> Subject: Re: [Elecraft] keying ration control
> To: "Elecra
Thanks Steve for mentioning this.
Its been one of my frustrations as a cw op.
I finally ended up programming my own PIC keyer in order to get my last
rig (non elecraft) RF output right.
There are no manufactured keyers that provide separate dit/dah/space
ratio control.
The Curtis chip ratio schema
8 matches
Mail list logo