Just installed the KPA3 module, went from 10 watts to 100 watts - good.
On CW, full power out, no problem.
On SSB, initial voice peak drives power out to the max (100 w) but within
moments, the power drops way down to say, 10 or 15 watts, then randomly spikes
back up but not as a function of
Did you perform a high power wattmeter calibration and TX Gain
calibration after installing the KPA3?
73,
... Joe, W4TV
On 2/24/2014 9:53 PM, Mark Pride wrote:
Just installed the KPA3 module, went from 10 watts to 100 watts - good.
On CW, full power out, no problem.
On SSB, initial
Have you tried the transmit power calibration procedure on your newer
K3? I can tell you from experience that it is an essential item on a
K3 owner's list of things to do before going on the air with a new
KPA3.
73,
matt W6NIA
On Mon, 24 Feb 2014 18:53:21 -0800 (PST), you wrote:
Just installed
I've read many of the messages about the K3 so far. My interest is ssb only
and its receive capabilities. To sum it all up: From the ones who have
tested the rig in the field, how does the K3 do on ssb and taking out the
qrm on 75 meters each evening? Is it advisable to get the 2.8, 2.1 and 1.0
Hi Larry:
At 07:27 10/11/2007, Larry Maguire wrote:
I've read many of the messages about the K3 so far. My interest is ssb only
and its receive capabilities. To sum it all up: From the ones who have
tested the rig in the field, how does the K3 do on ssb and taking out the
qrm on 75 meters each
5 matches
Mail list logo