I had same issue ... and finally decided there was nothing there and
proceeded ... I _think_ that was the right thing to do. SN #113.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Gary Bartlett
VE1RGB
Sent: Saturday, December 01, 2007 2:40 PM
To:
Tnx, Joe. I seem to remember from my K2s that there was such a film, but
looking under a magnifying glass it the K3 LCD, I see no evidence of any
protective material. And of course the absence of any instructions to that
effect should be a clue!
Only problem I have encountered so far was
Mine had no film on it
Simon Lewis
GM4PLM/DL4PLM
http://www.dl4plm.net
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Sanger, Joseph
Sent: Samstag, 1. Dezember 2007 20:47
To: Gary Bartlett VE1RGB; elecraft@mailman.qth.net
Subject: RE: [Elecraft] K3
Like most LCD's there is a plastic cover film added by the mfgr, but they
are removed in Aptos.
Looks like a note in the procedure to that effect might be in order G.
Ron AC7AC
-Original Message-
I had same issue ... and finally decided there was nothing there and
proceeded ... I
I removed mine (after I had assembled most of the front panel and had to
take it back apart - grrr).
I was afraid it might start to bubble or discolor in the future and I didn't
want to have to take the whole thing apart.
Craig Buck
k4ia
Fredericksburg, Virginia USA
VE1RGB'; elecraft@mailman.qth.net
Subject: RE: [Elecraft] K3 Display LCD - Cover?
Like most LCD's there is a plastic cover film added by the mfgr, but they
are removed in Aptos.
Looks like a note in the procedure to that effect might be in order G.
Ron AC7AC
01, 2007 3:49 PM
To: elecraft@mailman.qth.net
Subject: RE: [Elecraft] K3 Display LCD - Cover?
Mine was there and very obvious. I removed it when I took the FP board out
of the bag.
Craig
NZ0R
K3/100 #25
___
Elecraft mailing list
Post to: Elecraft
7 matches
Mail list logo
