I've read several good posts on your issue, but no one has mentioned this.
You report 5 watts at 2.4 amps, and a HIGH-CUR reading. If the current limit
is 3.5 amps, you should get a HIGH-CUR annunciation at 3.5 amps, not at 2.4.
In any post of this nature, the supply voltage will help a lot. A K2
NZ8J wrote:
Well, everything went fairly well up to the part III alignment. I was able
to get slightly over 2 watts during the first few steps of the alignment.
However during the next steps, I get higher current than I should, and the
max out is about 5.5 watts even with the current cal set to
NZ8J wrote:
I have checked and swapped power supplies, changed power cords, and set
current cal to 3.5 amps, but the max output seems to be about 5.5 watts. I
get "Hi Current" indication even with the current cal set to 3.5.
What kind of load you are using? Dummy load? Antenna? When using ante
3 matches
Mail list logo