Hey Don,
That was the solution. I'm still trying to get through the K3 manual
and never saw that setting. I set the tune level to 4 watts, exited
the menu and with the K3 set to first 50w, I hit the K3 tune button
and the power dropped to 4w and the LDG 600 Pro II tuned just fine!!
Tnx,
Not avail for K3.
...bill nr4c
Sent from my Verizon Wireless 4G LTE DROID
Robert Biamonte steamer...@mac.com wrote:
Of course I just thought of the phraseology, I am looking for a control cable
like the ones made for Yaseu and Kenwood. This cable would reduce the K3 power
to Tune level and
Hi Rob,
Up until a few months ago I had been using my K3, going into an Ameritron
AL-811 amp, through the LDG AT-600 ProII, and then to an external 4:1 balun,
110 feet of 450 ohm ladder line, and an 88 foot long doublet. I also had the
M-600 analog meter connected to the AT-600 ProII.
Nothing
Coax from the K3 to the LDG tuner, coax from the tuner ANT 1 output to
the balun (running a doublet). 12v to the tuner. Change freq on the K3,
TUNE on the K3, and let the LDG do its job. No control cables or
anything special needed.
73, Dennis NJ6G
On 2/5/2014 11:27 AM, Robert Biamonte
Of course I just thought of the phraseology, I am looking for a control cable
like the ones made for Yaseu and Kenwood. This cable would reduce the K3 power
to Tune level and return the power to normal when the Tune button is released
on the K3. Operating like the built in antenna tuner on the
Rob,
Take a look at the manual for CONFIG: TUN PWR - that will set the power
level used for a TUNE.
If set to NOR, it will follow the power knob, but otherwise will TUNE at
the power set in the menu.
ATU TUN is different than TUNE.
73,
Don W3FPR
On 2/5/2014 10:18 PM, Robert Biamonte wrote:
6 matches
Mail list logo
