__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Well think about it. The KPA500 has one cable to the radio. So it can't very
well do things with two antennas like the radio does. Yes you can put your
antennas on separate ports on the KAT500 (and a port left over) but only one
amp to radio link is the problem.
Sent from my iPhone
...nr4c.
I thought that might be the case. I did see an old thread where an option was
mentioned by Wayne to do that, but perhaps that never transpired. Thank you
for the advice.
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft
If all of your antennas are connected via the KAT500, then no, you cannot
do diversity receive that way, because there is only a single RF connection
between the K3S and the KAT500. You need to have a separate (receive only)
antenna connected directly to the subreceiver's auxiliary antenna input,
4 matches
Mail list logo