Dave;
You do not need the AUX IO cable. You do need to connect the PTT lines from the
transceiver to the cat, then from the KAT to the KPA. Both KPA and KAT will
work quite well with RF sensing for frequency.
If you wish to add frequency control from the transceiver, you can connect both
KPA
"Does it really power off the KPA and power it back on?"
The KPA500 states are:
Unpowered - power not connected or rear power switch off. It does not respond
to anything.
Powered but Off - Power is connected and rear power switch is on. Responds to
a few serial commands including power up (I
2 matches
Mail list logo
