Alan,
Thanks for your note. I do have all the players, the K3, P3, and
LP-Bridge, set up for 38400 baud so I don't think that's the problem.
I'll experiment more tonight with different parameters in LP-Bridge to
see if I can see what sensitivities there are. I'll let you know.
Thanks,
73,
Hi, Ted:
Yes, the LP-Bridge requires one to keep the P3 turned off until the
end.
LP-Bridge is not required, of course, but I had left mine in play
because I originally was running the P3 and the LP-PAN in parallel and
hadn't gotten around to reassigning COM ports to my logging
Thanks Gary,
I have an LP-PAN and will continue to use it even though I have the P3.
It is still needed if you want to run CWSkimmer. Even if I weren't
going to use LP-PAN I would still want to keep LP-Bridge running because
it allows multiple programs to control the K3 - one of those things
... Maybe it is a nit on my
part but the RS-232 port on the P3 is supposed to be transparent to apps
connecting to the K3 via RS-232 and it isn't - not strictly speaking
anyway since LP-Bridge hangs while connecting to the K3 if the P3 is
on. I figure now is the time to get Elecraft to
... Maybe it is a nit on my
part but the RS-232 port on the P3 is supposed to be transparent to apps
connecting to the K3 via RS-232 and it isn't - not strictly speaking
anyway since LP-Bridge hangs while connecting to the K3 if the P3 is
on. I figure now is the time to get Elecraft to
Nevertheless, it's not transparent. Maybe we should allow it to be
translucent? :-)
73, Ted, W2ZK
On 8/8/2010 12:22 PM, Joe Subich, W4TV wrote:
... Maybe it is a nit on my
part but the RS-232 port on the P3 is supposed to be transparent to apps
connecting to the K3 via RS-232 and it
Nevertheless, it's not transparent.
Depends on one's definition of transparent. It appears to work with
every application I've thrown at it except for initializing LP-Bridge.
To me that implies an issue with LP-Bridge - perhaps an excessive
sensitivity to timing - not an issue with the P3/K3.
Do you know how the P3 is implementing the transparency? Why do you
feel it necessary to prejudge? Oh, right ...
73, Ted, W2ZK
On 8/8/2010 8:07 PM, Joe Subich, W4TV wrote:
Nevertheless, it's not transparent.
Depends on one's definition of transparent. It appears to work with
every
Even with the latest version of LP-BRIDGE (9.8), I continue to
experience some rig time outs. All occur during periods of transmitting
where one does not drop back to RX during that period. Direct connect
without LP-BRIDGE shows none of these. They happen even with the K3
throttled back to
Do you know how the P3 is implementing the transparency?
Only that it appears to implement it with all of the software
I've tested (except for LP-Bridge obviously).
Why do you feel it necessary to prejudge?
Who is prejudging? If other software operates normally while
LP-Bridge which has
10 matches
Mail list logo