Hi John,
This should get you going:
MENU Set ups for the older Heil versions of the MH3 with dynamic mic
elements:
- MENU: MIC BTN = PTT (not PTT up dn)
- MENU: MIC BIAS = OFF
Wiring:
On KX3, use a 1/8 (3.5mm) plug. Don't worry about the 2nd ring on the
picture shown in the KX3 Owner's
I think is try one of two ideas.
1 amazon has available a 3 or 4 foot cable that has a rt angle TRRS plug on
one end and a straight TRRS plug on the other. Cut one end off and connect the
cable to an XLR 4 pin plug to plug into mic.
2 use above TRRS cable and just cut off the rt angle plug
Bill
Thank you for your information. These TRRS plugs and cables are often hard to
work with
due to the fine wire used on the computer interconnect business. I'm going to
explore the XLR 4
and TRSS with plug sources. Up here outside Southern Maine it's all about over
the Internet
3 matches
Mail list logo