FWIW ... I've got everything setup wired in the shack, but everything
(cable coax, ethernet, power) runs through an uninterruptible power
supply (ups). Many of the higher end models provide not only power
surge protection and battery, but lightning/surge protection for coax
and ethernet.
Sign me up for wireless - all those network cables are just too
effective antennas for lightning surges, and not just for direct hits.
I am on my 3d serial transceiver in my K3 I now have a surge protector
right at the port on the radio, but an still uncomfortable..
73, Pete N4ZR
Download
Last year I decided that the dual core desktop was not enough to run the
station so I built a new computer, something I hadn't done in over a
decade (because pre-assembled is cheaper).
I didn't want the bleeding edge, but I wanted something quick that would
run without much intervention for
with a converter, but once you get
above 2, then I think it is a good choice.
73,
Cliff K3LL
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Tim
Tucker
Sent: Tuesday, January 05, 2016 10:44 AM
To: Elecraft Reflector
Subject: Re: [Elecraft] suggested PC???
I
You probably can't get a PC that's too small.
For logging and control, an Intel Atom (or the equivalent AMD ultra-low
power CPU) would likely be an order of magnitude more than you need.
If you want to do digital (soundcard) modes, the slowest i3 would be lots.
Under Windows, I think more
Jerry,
An I7 is more than enough processor. You will want a video card
that can driver at least 2 monitors. You should consider adding real
RS232 ports, at least 2 or 4 if you will ever run two radios, and even
more if you want to control rotors, amps (KPA-500) or other accessories.
I haven't had used a "real" (old fashioned) serial port on any PC that
controls radio equipment in probably 10 years. It's really not necessary
if you purchase quality USB/Serial adapters (no fake chipsets) where
needed. The only PC I have with a old-fashioned serial port is an ancient
Toshiba
set.73 Tom
Sent from my Samsung Galaxy smartphone. Original message From:
Don Wilhelm <w3...@embarqmail.com> Date: 2016-01-05 2:55 PM (GMT-05:00) To:
Jerry <je...@molaver.org>, Elecraft@mailman.qth.net Subject: Re: [Elecraft]
suggested PC???
Jerry,
Put some real R
st.net>
Cc: "Barry LaZar" <k3...@comcast.net>; "Randy Cook" <k6cr...@gmail.com>;
elecraft@mailman.qth.net
Sent: 1/5/2016 10:33:53 PM
Subject: Re: [Elecraft] suggested PC???
Yeah, another Mac user here that easily runs most Windows apps in a VM
when needed. I have also u
Well, before Eric squashes the thread, one can also use the VMware product:
Fusion. I've been running it on my iMac for years and have NEVER had a problem
running any Windows application under it. Before Elecraft released the PX3 I
used NaP3 on a Windows 8.1 guest with my KX3 and it worked real
Barry LaZar" <k3...@comcast.net>
> Cc: "Randy Cook" <k6cr...@gmail.com>; elecraft@mailman.qth.net
> Sent: 1/5/2016 10:02:28 PM
> Subject: Re: [Elecraft] suggested PC???
>
>> My i7 iMac runs Windows 7 as well as OSX. With 32 Gb of memory, I can run
>>
enley" <b.den...@comcast.net>
To: "Barry LaZar" <k3...@comcast.net>
Cc: "Randy Cook" <k6cr...@gmail.com>; elecraft@mailman.qth.net
Sent: 1/5/2016 10:02:28 PM
Subject: Re: [Elecraft] suggested PC???
My i7 iMac runs Windows 7 as well as OSX. With 32 Gb of memory,
Yeah, another Mac user here that easily runs most Windows apps in a VM when
needed. I have also used boot camp when the app is critical, for example SDR#.
I can not understand the statement that Bootcamp has driver issues as when you
run the Bootcamp assistant, it has the drivers put on an
My i7 iMac runs Windows 7 as well as OSX. With 32 Gb of memory, I can run any
Windows or Apple applications. I don't have a K3 but the iMac runs my K2 and
FT-950 applications with no issues whatsoever. I can upgrade to Win 10 for
free but I dislike it very much.
Brian
KB1VBF
Sent from my
FTDI USB to serial adapters work on ALL platforms - without exception.
There simply is no reason to worry about "native" RS232 interfaces.
An i7 to run a computer for a station is massive overkill. I use an
Intel i3 NUC (4"x4"x2") with an SSD drive and 8 gigs of ram. Everything
runs just
That's the way I see it. I have a Lenovo T400 laptop running Win 7 Home with a
core 2 duo P8400 @2.2 GHz with 4 GB of RAM. I slapped in a 128G SSD and put the
original HD in a caddy in the CD drive slot. Runs everything, USB
keyboard/mouse, SDR-IQ, K3S, DXBase, MMTTY, external monitor, etc.
, but once you get
above 2, then I think it is a good choice.
73,
Cliff K3LL
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Tim
Tucker
Sent: Tuesday, January 05, 2016 10:44 AM
To: Elecraft Reflector
Subject: Re: [Elecraft] suggested PC???
I haven't had
: Tuesday, January 05, 2016 10:44 AM
To: Elecraft Reflector
Subject: Re: [Elecraft] suggested PC???
I haven't had used a "real" (old fashioned) serial port on any PC that
controls radio equipment in probably 10 years. It's really not
necessary if
you purchase quality USB/Serial adapter
Only you can decide how much PC you need to do what you want to do. If you
are just control and logging you can get by with 2-4G of RAM and a fairly
modest 160 gig disk drive, and a dual core. Even though the K3s has the USB
port I would still get something that would allow you to add one or more
Jerry,
in contrast to some of the feedback RS-232 serial ports are
still readily available on many brand name computers today including
laptops, desktops, towers, and rack mount PCs. I regularly purchase and
set up many for my employer.
While many USB-to-serial converters
and their drivers
I put together a new Windows PC about 2 years ago. The single component
that seems to have made the biggest difference is a 250 GB solid-state
drive (SSD). The computer boots in about 20 seconds (OK, the I7
processor helps too), which is important to me since I don't like to
leave it on all
I built two new boxes last year. One of them is an Ubuntu headless
server and the other an 8 core box running Win7. The 8 core box only
has 16 GB of memory at present but I'll fill the board later this year.
It is very nice to have serial ports available. If the motherboard did
not have
Hi Jerry,
Don't use a wired network. I had my shack computer on a wired network
when I took a lightning hit a couple of years ago.
Everything connected on the wired network was zapped (2 PCs, router,
modem, K3 RS-232 port, WinKey (connected to one of the PCs), and the
Cable TV amplifier
While everything in my shack is wireless...almost, I do have a USB
cable between the laptop computer and K3S.What is the recommendation
to make / convert the K3S port to wireless?
73
Bob K4TAX
On 1/5/2016 7:14 PM, Gary K9GS wrote:
When I rebuilt everything i went wireless with all of
I probably should have worded that better. All of my COMPUTER
connections to my network are wireless. My K3, WinKey, etc are cabled
to the hamshack PC.
On 1/5/2016 7:21 PM, Bob McGraw K4TAX wrote:
While everything in my shack is wireless...almost, I do have a USB
cable between the
OK thanks. I'm wireless with both of the laptops, wireless to the
printer, and to the house control systems. Just the radio connected via
wire to the computer.
73
Bob, K4TAX
On 1/5/2016 7:37 PM, Gary K9GS wrote:
I probably should have worded that better. All of my COMPUTER
connections
Original serial and parallel ports on the original IBM backplane were I/O port
mapped, not memory mapped. There were discrepancies between port numbers
between the true IBM I/O port numbers and "clones". Ports 3F8 and 2F8 for COM1
and 2, 3E8 and 2E8 for COM3 and 4. On a true original IBM,
Folks - we're getting pretty OT. Lets wind this thread down at this time in the
interest of keeping the signal to noise level reasonable for other readers.
73,
Eric
/elecraft.com/
On 1/5/2016 4:07 PM, WB4JFI wrote:
Original serial and parallel ports on the original IBM backplane were I/O
Jerry,
Put some real RS-232 serial ports in it. USB is fine for some things,
but there are times you want a serial port and USB to serial adapters
can sometimes be finicky.
I would limit the memory to 4 GB if it were mine, and yes, I have a
tower computer that I have dedicated to the
I have to agree with Joe.
If you must use a USB to serial converter for serious all purpose use,
get an Edgeport product.
There is a difference between a 'converter' and an 'adapter'. Most USB
to serial devices available in the consumer market are 'adapters' - the
Edgeport was directed at
I agree with Joe. A 2-port Edgeport provides two good RS-232 ports for
SO2R operation with my very new T540 Thinkpad. It, and another Thinkpad
bought around the same time, are the first I've ever owned that didn't
have a hardware serial port either on the chassis or on a port
Randy,
I seriously do not recommend this approach. I have been working with
a friend who has been working on a Mac Mini, actually he has two. He has
been trying to do an integrated station using HRD, FLDIGI, and a few
other things. These are Windows based and he has been using Boot Camp to
32 matches
Mail list logo