Some of the old one eighth inch plugs out of the 60s will not make contact in
the newer jacks. These are the two conductor type. So I think that years ago a
1/8 plug was really a 1/8 plug.
Sent from my iPhone this time
On Mar 16, 2014, at 12:07 AM, Mark Petiford rv6am...@yahoo.com wrote:
I'm interested in the Radiosport Headset.
The website (www.arlancommunications.com) recommends the electret mic,
however, I'm currently using a Heil dynamic mic which works quite well.
If anyone is using the Radiosport headset I would appreciate any info on
which mic element you are using
I have used my K1 for years without a problem. Some time ago the keyer
started sending a few random dits and dahs in the middle of a QSO for no
obvious reason. I let it sit for a few days while I thought about that
and when I tried it again it worked normally. Now it has a new problem.
The
Ken,
Did you inadvertently change the menu INP parameter to HND?
If that is OK. try reseating the firmware to clean off any possible
oxidation on the leads and socket.
Still did not fix it? Re-solder R19, R20 and RP5.
73,
Don W3FPR
On 3/17/2014 7:54 AM, Ken Wezeman wrote:
I have used my K1
HND it was. I don't know how that could have happened, but it did. I
forgot about that menu option because I never use it.
Thanks for the speedy reply! It's nice to know that there are gurus
like you out there watching out for us.
Ken - N9QIL
On 3/17/2014 8:28 AM, Don Wilhelm wrote:
Ken,
I have a Yaesu SP-5 speaker with a built-in LL-5 phone patch.
The instructions show the cabling connected to a FT-1000 which has all the
in and outs for this phone patch.
It is not very clear to me how to connect to the K3. Appreciate if someone
familiar with this could contact me off list.
I can
Along with the recently discussed MENU/MIC SEL Button 7 change, from the
incorrect Button 3 as stated in the manual on pg 52.
here is another update that would be welcome:
pg 40 says:
The U.S. 60-meter channel assignments
correspond to VFO settings of 5330.5, 5346.5,
5366.5, 5371.5, and
Holy Cow, Rich - $269? you can buy 5 Yamaha CM-500s, and tailor the
audio as you want with the K3's excellent TX equalizer. They sound
wonderfultogether.
73, Pete N4ZR
Check out the Reverse Beacon Network at
http://reversebeacon.net,
blog at reversebeacon.blogspot.com.
For spots, please go
I just measured a bunch of them (all 2 cond) with my handy-dandy Harbor
Freight digital micrometer and they range anywhere from 3.3 mm to 3.6 mm, so
the comment about a lack of manufacturing standards is obviously
appropriate.
73, Charlie k3ICH
- Original Message -
From: Gerry
That is my recollection as well. The standard was 1/8 for a long time,
originally as a mono connector, until many personal electronics products
manufactured outside of the USA started showing up with 3.5mm plugs jacks.
Had they wanted to adopt the existing standard but use metric naming, it
Has anyone had the occasional experience that the panadapter waterfall is
blank when you turn on the K3, then it returns if you switch bands? Once it
returns on a different ban, then it will be there on the original band when
I switch back. I have seen this twice, and I don't know what to make
Agreed, Jim. I am constantly amazed at the money people will spend for
top end mics that perform no better with the K3 than the cheapest
electret computer mic. And some of those mics (cough*Heil*cough) have
worse durability than ANY $15 dollar computer headset I have ever
owned. I have
73 from Ian GM3SEK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
73 from Ian GM3SEK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
This should be all.
73 from Ian GM3SEK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
Sent from my Verizon Wireless 4G LTE smartphone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
The last sentence also needs to be updated. Permitted emissions are now
USB, CW, and RTTY, however the FCC's bandwidth limitation on RTTY
really means PSK31 and other narrow band digital modes, not 170 Hz 45.5
baud FSK.
73,
Fred K6DGW
- Northern California Contest Club
- CU in the 2014 Cal
But bearing mind this applies to the USA. As the K3 is marketed worldwide,
maybe all other countries' allocations should be included too.
73 de David G4DMP
On 17 Mar 2014 17:09, Fred Jensen k6...@foothill.net wrote:
The last sentence also needs to be updated. Permitted emissions are now
On 3/17/2014 4:40 AM, Richard Thorne wrote:
If anyone is using the Radiosport headset
Someone invited the distributor of this headset to present at an NCCC
meeting (roughly 70 serious contesters). I tried it on and found it VERY
uncomfortable -- I couldn't wear it for an hour, let alone for
however the FCC's bandwidth limitation on RTTY really means PSK31
and other narrow band digital modes, not 170 Hz 45.5 baud FSK.
Not true ... if 2K80J2D is permitted *any* J2D mode (including 45.45
baud AFSK) with a bandwidth *less than* 2800 Hz would also be permitted.
Traditional RTTY
Sending again, never saw it show up on the list
-
I have a Yaesu SP-5 speaker with a built-in LL-5 phone patch.
The instructions show the cabling connected to a FT-1000 which has all the
in and outs for this phone patch.
It is not very clear to me how to connect to the
I think I stand corrected. When it was first discussed by ARRL, I got
the impression that any digital mode was confined to PSK-ish bandwidths.
Looking up the current FCC regs, 2K80J2D is permitted, so 45.5 baud
170 Hz shift RTTY would also be permitted. I guess 2K80J2D is Pactor-3?
Given
Mark, this one did work out but the main problem is that less and less
people seem to understand that this reflector does not allow HTML, so
breaks up any added text mark-up. Use plain unformatted text at all
times when answering the reflector and do not even try to send an
attachment. All
Computer mics work fine and are a great low cost alternative. But I
personally prefer the Heil Proset sold by Elecraft. Worth every penny. In
terms of durability, I also have a Heil BM-10 headset that is over 25 years
old. I used it constantly for 20 plus years and took it on several
Reading the document on this, I get the impression
that the procedure is done wholly within the KX3,
because in the latter post-refrigerator part it
says If the KX3 is connected to a PC running KX3
Utility, data will be sent to the Command Tester
screen. implying the connection to KX3 Utility
Optional.
73, Olli
Contest, DX radio projects: http://www.dh8bqa.de
Am 18.03.2014 01:49, schrieb Phil Wheeler:
Reading the document on this, I get the impression that the procedure
is done wholly within the KX3, because in the latter
post-refrigerator part it says If the KX3 is connected
Thanks, Olli. Starting it now.
73, Phil
On 3/17/14, 5:52 PM, Oliver Dröse wrote:
Optional.
73, Olli
Contest, DX radio projects: http://www.dh8bqa.de
Am 18.03.2014 01:49, schrieb Phil Wheeler:
Reading the document on this, I get the
impression that the procedure is done wholly
within
Part 97 is available in HTML at:
http://www.ecfr.gov/cgi-bin/retrieveECFR?gp=SID=41328afaea28f9a25ef32f8fdcacd897n=47y5.0.1.1.6r=PARTty=HTML
If you want it in pdf, simply print to a pdf printer like PDF Creator.
73,
... Joe, W4TV
On 3/17/2014 7:44 PM, Fred Jensen wrote:
I think I
Well Love my K2 (5XXX) but since I have my K3 and want to go mobile HF,
have been looking for a TS480HX. Willing to trade K2-100, SSB from a
non-smoking home. Contact me off list if interested.
Harlan
NC3C
__
Elecraft mailing list
Done. It does take more than the nominal 30 min --
more like 90-120 min. But it's done.
Phil
On 3/17/14, 6:36 PM, Phil Wheeler wrote:
Thanks, Olli. Starting it now.
73, Phil
On 3/17/14, 5:52 PM, Oliver Dröse wrote:
Optional.
73, Olli
Contest, DX radio projects: http://www.dh8bqa.de
Why can't you use your K2/100 mobile, Harlan, that needs you to downgrade to a
Kenwood? I have had no problem using my K2 /M. The internal ATU matches every
whip antenna I have tried.
73 de David G4DMP
On 18 Mar 2014 03:03, hsherr...@reagan.com wrote:
Well Love my K2 (5XXX) but since
I'm guessing the removable front panel. That's why
I have an FT-857 in my smallish car.
73, Phil w7ox
On 3/17/14, 10:00 PM, David Pratt wrote:
Why can't you use your K2/100 mobile, Harlan, that needs you to downgrade to a
Kenwood? I have had no problem using my K2 /M. The internal ATU
And well worth doing too. Drift from 2C to 45C is now less than 5Hz.
73 de David G4DMP
On 18 Mar 2014 03:50, Phil Wheeler w...@socal.rr.com wrote:
Done. It does take more than the nominal 30 min --
more like 90-120 min. But it's done.
David Pratt
Yes, I'm glad I did it. There was no question I
would eventually.
But 2 deg-C? Did you run a test that low in temp?
I think mine went to 17 deg-C when it came out of
the cooler.
Phil
On 3/17/14, 10:05 PM, David Pratt wrote:
And well worth doing too. Drift from 2C to 45C is now less than
34 matches
Mail list logo