Yes, when HiCur is detected, the power will be reduced to the level
permitted by the value in the CAL CUR setting = and that value will be
stable.
If HiCur happens on 40 meters (but not 60 meters), and 20 meters (but
not 30 meters), 15 meters (but not 17 meters), and 10 meters (but not on
12
Exactly. This is computer polling. Put as much ferrite on the USB (serial
port) cable as you can.
73, Igor UA9CDC
- Original Message -
From: K4ia via Elecraft elecraft@mailman.qth.net
To: bwru...@gmail.com
Cc: Elecraft Reflector elecraft@mailman.qth.net
Sent: Monday, October 06,
Problem originated on 6M(affects all bands) when ATU was being used to Tweak
SWR from 2.4 to 1.0:1. ATU constantly moved up and down tuning, never resting
on 1.0:1Power output was intermittent(100W) would go to zero then back to 100
as ATU was looking for match. Then, HI SWR, RFI scrolls
For sale K3/10 serial 16xx. $1550 plus shipping. Smoke free environment.
I purchased this rig new and it has seen minimal usage. myc...@arrl.net
Frankie K4TEN
Has the following options:
K3/10
K3 10W Xcvr. (Assembled)
$1799.95
KBPF3
K3 Gen. Cov. RX Module
$169.95
I've got a KX3 that so far has only been used on CW or data, and have been
using fairly bulky Sony headphones with it. Those phones work fine, but aren't
exactly something I want to use in a portable / car camping environment.
Yesterday while at Fry's electronics I saw a lightweight headset
Hi
I run a Kenwood TS-2000, KAT 500 Tuner and KPA 500 amp.
In the last few months I have been having an intermittent issue with my
amp. On some occasions when I have changed bands it will not follow the
band changes like the ATU does. So if I am on say 14MHz and change to 7Mhz
the ATU changes
I’m rapidly getting nowhere with this problem. I need to understand how the
overall circuit works and what I should expect to see on the ‘scope.
My understanding is that RF Power is basically under the control of a
feedback loop controlled by the VRFDET circuit on the RF board.
The front panel
Here is the net report for the Elecraft SSB net from October 5, 2014. Peter,
ZL1PWD, checked in for the first time in quite awhile. We had 29 participants.
Station NameQTH Rig S/N
K4GCJ Gerry NC K3 1597
Gareth,
You should find between 200 and 400 mV peak to peak (dependent on the
particular speech patterns) from an electret microphone such as the
Elecraft MH2. That is 70 to 140 mV RMS.
That is sufficient to drive the SSB output to pull power.
73,
Don W3FPR
On 10/6/2014 3:57 PM, Gareth -
Don't know if bad drivers is the right term, possibly new drivers
might be better. I agree however that trying to fool proof can lead to
all sorts of problems. Although I thought [in the early 80's] that this
cellular telephone business wouldn't catch on [heavy phone-in-a-bag] ...
I am now
The problem isn't drivers or anything like that, it is attempting
to deal with application software that does not handle the K3's
unique interface.
For example, WSJTX 1.4 when controlling *any rig* via DXLab Suite's
CI-V Commander sets the frequency (VFO A), turns on split, then sets
the
Anyone have a K3 for sale, if so please send details to include serial number,
options, etc. also best price shipped to zip 45324. Can pay by PayPal.
Thanks
Tim
NZ8J
__
Elecraft mailing list
Home:
Again? Really?
Tim must have the record for the most number of K3s bought and then sold,
over the last several years.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Get 100 watts out of your K2!
In excellent condition with cables and manual, KAT100 amplified, KPA100 antenna
tuner installed in separate enclosure and built by me in December 2009 and used
up until a few months ago. With this amplified/antenna tuner, it is a simple
matter to run the K2 at QRP
On Mon,10/6/2014 1:56 PM, Don Wilhelm wrote:
You should find between 200 and 400 mV peak to peak (dependent on the
particular speech patterns) from an electret microphone such as the
Elecraft MH2. That is 70 to 140 mV RMS.
That is sufficient to drive the SSB output to pull power.
I once
This is a bug-cleanup release, rev. 2.25, that will appeal to specific KX3
users. Changes are listed below.
This release also supports text display on the PX3 (requires PX3 rev. 1.12),
and DUAL RX (dual watch) even with RX SHFT=8.0. Both have been extensively
tested at this point.
If you're
16 matches
Mail list logo