I am interested is acquiring an ELECRAFT K2 or possibly K2/100 as an
emergency radio. . Radio should include SSB, internal battery pack option
and Elecraft ATU.
Contact me directly at ardujen...@aol.com
ALAN KB7MBI
__
Hi members;
Perhaps someone now about this company or any experience with ?
I do have made a order at 5 november 2016
Till now,not any order received ?
I now,it has nothing to see with K-radios .
hfwireantennas.com
4673 Henry St
Norton Shores, MI
49441-5432
vm 231-335-3775
Hi members;
Perhaps someone now about this company or any experience with ?
I do have made a order at 5 november 2016
Till now,not any order received ?
I now,it has nothing to see with K-radios .
hfwireantennas.com
4673 Henry St
Norton Shores, MI
49441-5432
vm 231-335-3775
You're only using one of the signals, either I or Q and at very low level. I
believe you'd get better service with the phones output. Fldigi is only looking
at the tip signal
Sent from my iPhone
...nr4c. bill
> On Dec 2, 2016, at 2:57 PM, John Pitz wrote:
>
>
>
just want to let anyone looking for a speaker for the kx3 to look at
this one.. small and light, I purchased one and have been using it for
4 days.. it is small, and has a great sound.. has 8-9 hours on battery
power and charges with usb, the plug between the speaker and kx3 is even
provided..
Hi folks
A follow up KX-3 4092.
Thankyou to the off-list emails and advice.
It's not looking flash. Suspect the fault is a low level
issue on the early 12volt lines or one of the dc-dc converters.
At this stage it's a non-viable repair here so will put it on the
"will take another look later
Contact Wayne Smith K8FF. He was the supplier of the Elecraft finger dimple. He
may still have a few left.
73, Brian K3USC
> On Dec 2, 2016, at 4:35 PM, stan levandowski wrote:
>
> Oops! Let's try this again...
>
> Has anyone on this list either developed or discovered
Lyle KK7P wrote:
"The IQ output is not processed by the DSP. A signal above OR below the
carrier will show up. There is no opposite sideband rejection."
I think the point of Lyle's response was missed. Signals in both sidebands
will be displayed on the FLDIGI waterfall!
What does this
I may see him at our DX club meeting Mon. night. I he’s there I’ll ask and
report back.
> On Dec 2, 2016, at 8:18 PM, Eric J wrote:
>
> I think he's long gone. I've tried ordering one including emailing him
> several times over the last year or more without a single
If you've been e-mailing him using the form on his website, that might be the
problem. I e-mailed him a couple of times recently via his site, and received
no reply. I then e-mailed him directly, using the e-mail address on his QRZ
page, and received a reply giving details of the weighted K2
Yes. The answer is NO!
Sent from my iPhone
...nr4c. bill
> On Dec 2, 2016, at 2:43 PM, Kevin - K4VD wrote:
>
> When using the KX3 with fldigi can I use the RX I/Q output from the radio
> to the computer? I can't find any reference to i/q in the fldigi docs so
> I'm assuming
I think he's long gone. I've tried ordering one including emailing him several
times over the last year or more without a single response.
Fortunately, I bought one several years ago, but I would sure like to find
another for my second K2.
Eric
KE6US
On 12/2/2016 11:18 AM, Dauer, Edward
I agree with Phil and others who replied. KX3 if you want to get it on the air
and go; a K2 if you enjoy the process of near-DIY.
I have a K3 system, and a KX3 system, and just finished my second K2 /100 – one
in each of the two configurations. The K3 is the base station and for me the
best
Date: Thu, 1 Dec 2016 13:00:02 -0500
From: Guy Olinger K2AV
To: Elecraft Reflector
Subject: Re: [Elecraft] SWR issue with K3
Except those that grab the cover off the HVPS and then Darwin
"laughs"! No progeny afterward!
Applies to tower work,
Hi Tom,
Your initial thought is correct: "the K3VL1K1 is not wired correctly and
will not key the amp". I had the exact same issue and spoke to the fellow
who made the cable for Array Solutions, and he said he purposely didn't wire
the cable to key the amp. He gave me a reason why but it
Never owned or operated the K2, but I do have the KX3 and find it
hears as well as my K3/10 and transmits the same power on 160-6m. I
have my KX3 mounted in new truck for mobile and also have the 100w
KXPA which works well with either rig. K3 beats the KX3 in really
tough operating
Hello,
One of the useful features of Win4K3Suite is that it interfaces to all 3rd
party logging and digital mode programs such as HRDLogbook, DX Keeper, NAP3,
N3FJP, N1MM+, FLDigi, MIXW as well as hardware devices such as the K3/0, the
Pig Knob and various antenna tuners. In order to
OK - I got the answer concerning I/Q audio to fldigi. No advantage as
fldigi does not process I/Q signals. Maybe I'll drop a feature request on
the fldigi forum. It would be nice to see a nice, wide swath of a band. I
know Win4K3 and PX3 and maybe some other tools are available but I was
kind of
Has anyone on this list either developed or discovered
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
Oops! Let's try this again...
Has anyone on this list either developed or discovered a method to put a
finger dimple on the KX2 VFO knob?
Elecraft used to sell a finger dimple for the K2 but no longer stocks
it.
A Google search found no hits for a finger dimple.
The KX2 is now my main
There is no advantage to using the I/Q output for fldigi. It only cares about
one channel,
so use the regular audio output.
wunder
K6WRU
Walter Underwood
CM87wj
http://observer.wunderwood.org/ (my blog)
> On Dec 2, 2016, at 12:25 PM, Jim Brown wrote:
>
> On
Kevin,
The IQ output is not processed by the DSP. A signal above OR below the
carrier will show up. There is no opposite sideband rejection.
A signal from the headphone jack will have the opposite sideband removed
or significantly reduced in amplitude.
73,
Lyle KK7P
On 12/2/2016 2:43
Kev,
I tried that very early on and found that the signal amplitude was
really not adequate for my tastes - but it did work.
So I guess it all depends on your soundcard and its gain.
Fldigi and other similar applications only use the left channel. A
panadapter application will use both.
I have been and it seems to work just fine. I have made contacts using
that setup with PSK31 and have decoded PSK31, RTTY, as well as one other
mode-can't remember which at the moment. I have also been told rather
emphatically that fldigi would not work with the IQ signal. My
experience is it
On Fri,12/2/2016 12:15 PM, Don Wilhelm wrote:
Fldigi and other similar applications only use the left channel.
Yes. MMTTY can be set to decode L or R, but only transmits Mono. 2Tone
(an excellent RTTY program) can easily be set to RX and TX on L or R.
WSJT-X can easily select L and R for
Paul,
Your best resource for resolution of this problem is to contact Elecraft
support. They can give you some things to check.
It certainly is not a candidate for the scrap bin, but it does need some
help.
73,
Don W3FPR
On 12/1/2016 11:52 PM, paulb wrote:
Hi folks
Havn't used the kx-3
When using the KX3 with fldigi can I use the RX I/Q output from the radio
to the computer? I can't find any reference to i/q in the fldigi docs so
I'm assuming the answer is no but thought I'd ask before giving up.
Kev K4VD
__
Elecraft
I just tried to order a weighted knob for the K2 from 73cnc, and got an “out of
stock” reply. The same thing happened when, just to see what was happening, I
tried their order page for K3 knob set and the KX3. Does anyone know whether
the producer is out of the business?
Ted, KN1CBR
Price Drop.
Jeff
For Sale Mint KX2 #316
with ATU, Real Time Clock, Paddle, Hand Mic, Large Travel Bag, Lithium
Battery and charger, acc cable.
$1000 Shipped CONUS
Jeff
K2SDR
k2...@verizon.net
On 11/13/2016 11:44 AM, jkelly wrote:
For Sale Mint KX2 #316
with ATU, Real Time Clock,
Answered my own question:
http://www.gemsproducts.com/product/kx2-vfo-a-knob-beta/
73, Stan WB2LQF
Oops! Let's try this again...
Has anyone on this list either developed or discovered a method to put a
finger dimple on the KX2 VFO knob?
Elecraft used to sell a finger dimple for the
Kevin,
The simplest approach I found was to use a SignaLink USB plugged
into the audiophones out. I then used an amplified computer speaker
connected to the aux out of the SignaLink. This way I had to make no
cable or wiring change to go to a digital mode, except to replace the
mic with
There is also no harm in using IQ. If you are jumping from digital to
ssb you may not want to be continuously plugging and unplugging any more
cables than necessary.
On Fri, 2016-12-02 at 12:41 -0800, Walter Underwood wrote:
> There is no advantage to using the I/Q output for fldigi. It only
John, that's exactly why I was asking about I/Q - to free up the phone jack
but a wide spectrum display would have been nice in fldigi.
Ask Barry suggests, keeping the I/Q jack open allows the use of CW Skimmer
(use it on my Flex, not on the KX3 yet) or Win4K3. I own win4k3 but not
fully using it
33 matches
Mail list logo