I agree with Victor's comments. I am all in favor of the elimination of
the all-in-one, big box rigs. No vendor in the amateur radio market can be
the premiere supplier in all areas even though Elecraft is trying hard. I
don't consider them the best panadapter HMI vendor or best paddle
Dear OMs and YLs,
For me the K3 epitomizes modularity. One can build the radio up over
time and purchase only those features required. This keeps entry level
prices down and enhances repair. From Ireland, one could return a faulty
module perhaps holding on to the K3/S and continuing to
Here is the log from last Sunday's ssb net.
Elecraft SSB Net 4- 14-2019
WB9JNZ Eric IL K3 4017 Net Control
N9SRA Steve IL Kenwood ts 480
NC0JW Jim CO KX3 1356 Relay station
K7BRR Bill AZ
I had a Heil FS and desoldered the 1/4” and resoldered a right angle RCA plug
for the K3S. Works great!
Hank
K4HYJ
> On Apr 17, 2019, at 8:29 AM, Bob McGraw K4TAX wrote:
>
> Yes and the length of the 1/4" phone plug plus the length of the adapter to
> an RCA connector is something of
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Who uses RCA connectors these days? I thought they were long gone.
Bert VE3NR
On 4/17/2019 4:34 PM, HB wrote:
I had a Heil FS and desoldered the 1/4” and resoldered a right angle RCA plug
for the K3S. Works great!
Hank
K4HYJ
On Apr 17, 2019, at 8:29 AM, Bob McGraw K4TAX wrote:
Yes and
Smart man!
73
Bob, K4TAX
On 4/17/2019 3:34 PM, HB wrote:
I had a Heil FS and desoldered the 1/4” and resoldered a right angle RCA plug
for the K3S. Works great!
Hank
K4HYJ
On Apr 17, 2019, at 8:29 AM, Bob McGraw K4TAX wrote:
Yes and the length of the 1/4" phone plug plus the length of
Long long ago when I was still a teenager and knew everything, I used an
extra J-38 mounted on a piece of plywood for a footswitch. As I
remember it worked quite well. I don't remember what sort of plug the
TX required but I must have made it work. Awful lot of traffic here for
a SPST
On 4/17/2019 2:28 PM, Bert wrote:
Who uses RCA connectors these days? I thought they were long gone.
Higher quality semi-pro audio products use RCA connectors, and high
quality RCA (and 1/8-in) cable-mounted connectors made by Switchcraft
and Neutrik are widely available from audio vendors
I have not seen a HF ham station that did not use RCA connectors.
John KK9A
Bert ve3nr wrote:
Who uses RCA connectors these days? I thought they were long gone.
Bert VE3NR
__
Elecraft mailing list
Home:
Good evening,
I know this is an old post, however, "here goes nuthin'!" Does anybodt have
any spare touch-up paint for the K1/K2? My KAT100 has a small nick in the
side panel edge and I'd like to touch it up. Tnx in advance. As always, take
care es...
Vy 73 de Bert
WA2SI
--
Sent from:
When asked "what is the best radio?" I think Rob Sherwood summed it up
saying in a few words "the one you enjoy using".
73
Bob, K4TAX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
For me, that would be ham radio hell. My ideal radio has knobs. A big
one for tuning, little ones for other things. Knobs and buttons. I'm not
knocking Flex at all, but if that were the only radio or all radios
worked like that, I'd just do woodworking.
Some people like tuning. Some people
There's one on the back of your K3 if you have one of those.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
On 4/17/2019 2:28 PM, Bert wrote:
Who uses RCA connectors these days? I thought they were long gone.
Bert VE3NR
__
Hi Bob,
The K3 and K3S IF output is on all the time.
73,
Eric
elecraft.com
---
Sent from my iPhone 6S
> On Apr 17, 2019, at 7:23 PM, Bob Conder via Elecraft
> wrote:
>
> Is there a software setting in the Config menu to activate the IF Output on
> the KXV3?Or, is it always "on" &
Is there a software setting in the Config menu to activate the IF Output on the
KXV3?Or, is it always "on" & generating a signal?TIA,Bob K4RLC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Eric, Tnx for quick reply & info.Can't blame my problem on that :-)Bob K4RLC
From: Eric Swartz WA6HHQ - Elecraft
To: Bob Conder
Cc: Elecraft list
Sent: Wednesday, April 17, 2019 10:55 PM
Subject: Re: [Elecraft] IF Output ?
Hi Bob,
The K3 and K3S IF output is on all the time.
Tonight I attended a presentation by Ned Stearns AA7A on the Dxpedition version
of FT8, and his extensive architectural design contributions to the Baker
Island operation as well as his input to Joe Taylor's work on the protocol.
While most of us don't need anything like the Baker station
I found a K2 to buy...Not looking anymore...Albert Little W5APL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
Don,
many thanks.
Manual is printed now.
I am going to do it step by step accordingly during coming Easter holiday.
I will report then after...:)
73 Petr
-
73 - Petr, OK1RP
"Apple & Elecraft freak"
B:http://ok1rp.blogspot.com
MeWe: https://bit.ly/2HGPoDx
MeWe: https://bit.ly/2FmwvDt
--
Hi Eric, Madelin has my order thank you. Just loaned my KX2 to EI6FR for
SOTA use. Declan is most impressed. I fell for the KX2 upon seeing it at
Friefrichshafen. So small so much performance and a great display for old
eyes.73 Doug EI2CNSent from my Samsung Galaxy smartphone.
I also enjoyed Ned's presentation.
There is however no need for new transceiver architectures to support FT8
DX mode.
The multi-transmission for FT8 Fox is created entirely through software by
combining
the baseband (audio) signal for each "transmitter" into a composite signal
fed to the
Thanks for the info Jim but my problem is that I have no idea how to
connect what with what.
That's why I was looking for someone who may have used the KX3 with
FreeDV, maybe no one has yet...
Kev VK5KS
On 16-Apr-19 5:44 PM, Jim Rhodes wrote:
An inexpensive USB sound card (look for
Hi Bob,
I've been playing with the RSP1A at the IF of my K3 and HDSDR and SDR
Uno as panadapter software. I also had Omnirig running for this. Never
bumped into the kind of problem you describe. I can reproduce your
problem though, by setting up omnirig with wrong RTS/DTR setting. One
thing
Yes and the length of the 1/4" phone plug plus the length of the adapter
to an RCA connector is something of serious length sticking out behind
the radio. Sure is a grand opportunity to get the radio RCA connector
damaged. Estimated total length of the albatross is about 3". Not on
my
This will work, use one side of it. I couldn't find a mono version of it.
https://www.amazon.com/CGTime-Splitter-Gold-Plated-Extension-Adapter/dp/B07K7C1MSF/ref=sr_1_41?keywords=1%2F4%22+female+to+to+rca+male+adapter=106937=gateway=8-41
Is there an APP for this??? Or, let's make it as complicated and wordy
as possible! I know, let's build a mountain from a mole hill!
Cut the offending plug off and solder a proper (for your needs) plug on!
It could not be easier!
Agreed but I would really make sure that the switch is acceptable before
modifying it. I do not use a foot switch but I am aware that there are many
different ones available. Also if I recall the Heil foot switch will plug
into their adaptor if you are using the front mic jack.
John KK9A
Don
I use a Heil FS-3. I just cut the 1/4 in plug off along with much of the
surplus cable and fitted an RCA plug. Couldn't be easier.
Regards,
Mike VP8NO
On 17/04/2019 09:29, Bob McGraw K4TAX wrote:
Yes and the length of the 1/4" phone plug plus the length of the adapter
to an RCA connector is
Those adapters will place a lot of torque on the back of the K3. A better idea
is an adapter with connectors on each end of a wire.
Chuck Hawley
c-haw...@illinois.edu
Amateur Radio, KE9UW
From: elecraft-boun...@mailman.qth.net on
behalf of Scott
Sent:
Here's what I use. It allows switching up to four sensors to one P3:
https://smile.amazon.com/gp/product/B00AUB3SSA/ref=oh_aui_detailpage_o04_s00?ie=UTF8=1
Amazon says it is "currently unavailable" but if you search for "8p8C
manual switch" you should be able to find other options.
You
I set up FreeDV once, but it was a while ago. It is exactly the same as setting
up any digital mode for radio connections. The difference is that you also need
to hook up a headset (or mic and speakers) for the operator. Get the radio side
set up first using test tones.
wunder
K6WRU
Walter
Having become the proud father of a KPA1500, I am enjoying it a lot. I use a
160M Full Wave Loop on Ant 1 and my Sommer log fed yagi on Ant 2. I only
have one 2KW HF Sensor for my P-3 and currently have it hooked up to Ant2. I
would love to also have one hooked up to Ant 1, but the P3 has only
Want to buy used …
• L side panels for K2
• Front-bottom panel (with tilt stand hopefully)
• Rear-bottom panel
Reply off list.
Thanks,
Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40)
570-916-9590 (cell, text)
http://amazon.com/author/alandwilcox
Williamsport, PA 17701
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
20 plus years ago I slung some wire in a tree with a fishing pole at Yellow
Stone Park and hooked it to a QRP Sierra. Was trying to activate scarce
Wyoming and the park. The only call I got on my CQs was N6KR.
That's another one
of those
Is there a way to make the power meter in the P3 auto scale like the W2 does?
Thank you
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
37 matches
Mail list logo