She is far smarter than I. We are going to look at hard wood floors this
weekend
Sent from Yahoo Mail on Android
On Thu, Oct 3, 2019 at 9:52 PM, Macy monkeys wrote:
Better yet, interest her in becoming a ham!
Annette N7SG
> On Oct 3, 2019, at 5:50 PM, Jim Brown wrote:
>
>> On
I don't think so. We're discussing how to convince a non-ham SO
to be willing to allow expenditures on things that totally
disinterest them.
There is at least one person who has posted on this list that he
and his SO have an, "equal money for hobbies" agreement, and he
needed to spend some
During a CW ragchew with a 20 wpm 400 w transmission duration of approximately
5 minutes I was being bothered by amp fan kicking into high gear towards the
tailend. So I set the fan to level two; my amp is down under my desk so fan
noise is minimal. Now I can enjoy a CW ragchew without the amp
Good afternoon,
I have successfully connected my QSR-1 to my K3s if-out, and immediately
noticed the signal strengths showing on the QSR-1 were much weaker. I
probably have an early K3s, so the if-out signal strength is even weaker.
Any recommendations at a good preamp to use? It seems like
I use an SDR-IQ on the i-f output on my (very) early K3S. it works fine. IIRC,
always a dubious proposition, I did the mod on my original K3 and it worked well
too without any additional amplification. I think you have another problem.
Wes N7WS
On 10/3/2019 2:01 PM, Fred Massey wrote:
Problem solved. Operator error.
I had my USB Audio CODEC and 2-USB Audio CODEC reversed and each on the
wrong radio. I actually had screen shots for both setups. I guess I changed
a while ago and forgot to delete the wrong one.
See you all in CQP.
73, Ken, K6LA / VY2TT
On Thu, Oct 3, 2019 at
I have KIO3Bs for both of my K3s (plural K3, not K3S.) In getting setup for
the CQP with Writelog, I find I cannot transmit SSB using the Line In from
the KIO3B on both radios. If I plug a mic into the rear mic jack and change
the menu MIC SEL setting to rP.H I am able to transmit SSB.
I know the
On 10/3/2019 5:25 PM, Ken B via Elecraft wrote:
Now to somehow convince the CFO and chief cookie counter
Get her interested in sewing machines or looms. I NEVER have to ask my
XYL about buying ham gear!
73, Jim K9YC
__
Elecraft
Hi mates!
Is there a way to connect an RX antenna without using a KXV3 option?
I've got an IF-output socket connected directly to P86 on RF board on one
of my K3's, maybe there is a similar way for an RX ant?
Thanks and 73!
Ilya R3XA
__
I'm selling my K-POD - as new in good condition - includes power cable
with Powerpoles and the factory RJ-45 for connecting to the radio.
Will include manual and examples of programming.
$200 shipped CONUS via USPS Priority Mail - will take PayPal or Postal
Money Order.
thanks 73 Dwight
On the chance that someone has a used one of these: I’m looking for the
internal kpa module 100w amplifier that will upgrade my k3s/10 to a /100. Also
looking for the 2nd receiver module and DVR boards.
Thanks!
-Brian N9ADG
Sent via iPhone
I just had an excellent call with Bruce from Elecraft service. While
discussing the issue with my KPA500 we also drifted into the K4.
That sounds like the perfect radio for myself. Now to somehow convince the CFO
and chief cookie counter
Thanks 73 Dwight NS9I
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
Hi Ilya,
This might be possible. Take a look at it he K3 schematics. Before I found a
KXV3 I was considering this, certainly the IF out.
As I recall on the main board there is a connector with the rf in and out.
These are jumpered on the main board when no KXV3is fitted.
Then there should be
I have for sale a pristine condition Elecraft K2-100. This is my second
K2/100 rig and was meticulously built by me with the following options.
K2, KPA100, KNB2, KSB2, K60XV and K160RX. After completion the radio was
sent to Don Wilhelm, W3FPR for a check over and complete professional
Call Elecraft , that have them and will sell to you.
Sent from my iPhone
...nr4c. bill
> On Oct 1, 2019, at 4:48 PM, Petr, OK1RP/M0SIS wrote:
>
> Hi
>
> does anybody know the type of those four encoders in order to find them on
> DigiKey or so please?
>
> Thanks
>
>
>
> -
> 73 -
After a several month hiatus from radio, have discovered my K2/100 (S/N 3010)
has some issues with transmit power on some bands and a receive issue on 10m
and 12m. I am the builder of this K2.
In Feb. of this year, I wrote the reflector looking for help with “K2 base
low xmit power on all bands
A friend of mine bought a New RADIO years ago. His loving wife then bought
a Rivera, Refrigerator, and Rugs. Had something to do with the "R" word.
Hi..
Ed.. AB4IQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim Brown
Better yet, interest her in becoming a ham!
Annette N7SG
> On Oct 3, 2019, at 5:50 PM, Jim Brown wrote:
>
>> On 10/3/2019 5:25 PM, Ken B via Elecraft wrote:
>> Now to somehow convince the CFO and chief cookie counter
>
> Get her interested in sewing machines or looms. I NEVER have to ask my
Are we getting a little sexist here?
Sent from my iPad
> On Oct 3, 2019, at 8:51 PM, Jim Brown wrote:
>
> On 10/3/2019 5:25 PM, Ken B via Elecraft wrote:
>> Now to somehow convince the CFO and chief cookie counter
>
> Get her interested in sewing machines or looms. I NEVER have to ask my XYL
But make sure you have 2 Stations in the shack.
Or you won't never ever have to ask her about buying ham gear. But you
have to ask for playing the radio. ;-)
73 de Chris, DL2MDU
Am 04.10.2019 um 03:50 schrieb Macy monkeys:
Better yet, interest her in becoming a ham!
Annette N7SG
On Oct
Thanks to Elecraft excellent support and unbelievable effort from them I got
it...
E640018 PEC11R-4015F-S0018 (PEC11R-4015F-S0018-ND by Digi-Key)
-
73 - Petr, OK1RP
"Apple & Elecraft freak"
B:http://ok1rp.blogspot.com
MeWe: https://bit.ly/2HGPoDx
MeWe: https://bit.ly/2FmwvDt
--
Sent from:
Regarding the timeset function on the KX3 utility program (Windows). It
does have that. It was my oversight - I just didn't see it. Regarding the
RTC calibration function - it sounds like that may not be feasible due to
the design of the radio. Thank you all for pointing out the location of
Looking for a more recent, well optioned KX-2. Please email me with
particulars and asking price.
73, Lou, W0FK
lladerman AT earthlink DOT net
-
St. Louis, MO
"The difference between stupidity and genius is that
genius has its limits." Albert Einstein
--
Sent from:
Some experimental data documented here - https://tinyurl.com/y3ghrdpw
Based on this data set I conclude there is no advantage to running minimum fan
speed greater than zero. That's going to surprise some people and comments on
test method and test data are welcome.
73,
Andy, k3wyc
25 matches
Mail list logo