Re: [Elecraft] ERR KP1

From what I recall it has to do with the K-pod. Google confirms that. http://elecraft.365791.n2.nabble.com/K3s-error-message-KP1-td7633496.html 73, Joe, KO8V > On Sep 27, 2020, at 16:44, w...@jetbroadband.com wrote: > > All, > > > > Encountered this error (ERR KP1) during the CQWW rtty

Re: [Elecraft] [K2] Intermittent INFO 080 problem.

Bill, Unplug and replug all options in the K2 as a first try, also try removing the cable to the KAT100. If it is the KAT100, try shortening the cable between the KPA100 and the KAT100. INFO 080 means that one of the option's firmware is not communicating with the K2 MCU (or in the case of

[Elecraft] Weekly Slow Speed CW event

Late notice but I thought some here may be interested: http://www.k1usn.com/sst.html Starts at Z tonight (US). John AE5X __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] [P3] P3 CENTER frequency

>From Alan N1AL: The P3 does remember center frequency per band. However, if you tune the K3 VFO A to a frequency outside the old P3 display range, then the P3 center frequency is changed according to the rules specified by the "FixMode" menu setting. If you want the center frequency never to

[Elecraft] [K3S] Loss of audio quality

I am using a K3 that has been upgraded to include the KIO3B three board set with USB audio to the computer. For several years, it has been working well with my MacBook Pro. Recently, my decoding of FT8/FT4 signals has become much worse. I see a large number of signals on the wsjt-x waterfall,

Re: [Elecraft] Weekly Slow Speed CW event

Thank you for the notification reminder kb2huk On Sun, Sep 27, 2020, 7:42 PM John Harper wrote: > Late notice but I thought some here may be interested: > http://www.k1usn.com/sst.html > > Starts at Z tonight (US). > > John AE5X >

[Elecraft] MH2, MH4 mic compatibility?

Will an MH2 mic work with a K3S, and will an MH4 mic work with a K2? Thanks, 73, Eric WD6DBM  __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] [P3] P3 CENTER frequency

I like the operation of the “Full Span” selection, but it seems after a band change the center frequency of a 20 kHz span has changed. Instead of having 14080 – 14100, I’d see 14075 – 14095. Jim N7US From: w4sc Sent: Sunday, September 27, 2020 20:24 To: Jim McDonald ;

[Elecraft] ERR KP1

All, Encountered this error (ERR KP1) during the CQWW rtty contest. Could not find the error in the manual. Has anyone else ever run into this error and if so, do you remember what was the cause and the possible cure? Best regards, Jerry, W1IE

[Elecraft] [K2] Intermittent INFO 080 problem.

Over the years, I’ve had a little bit of trouble with my K2 occasionally given INFO 080. The first time it happened, during a Field Day even, I attributed it to condensation building up on the inside overnight. Once it warmed up altering being turned on for a while, it was fine. I’ve used this

[Elecraft] [P3] P3 CENTER frequency

I think I recall seeing a solution to the P3's losing the center frequency using fixed tune mode when changing bands. It's very frustrating to have to recenter the display after coming back to a band, especially in a contest when it wastes time. Is there a fix? Jim N7US

Re: [Elecraft] MH2, MH4 mic compatibility?

Eric, Yes to both. 73, Don W3FPR On 9/27/2020 7:04 PM, eric norris via Elecraft wrote: Will an MH2 mic work with a K3S, and will an MH4 mic work with a K2? Thanks, 73, Eric WD6DBM  __ Elecraft mailing list Home:

Re: [Elecraft] [K3S] Loss of audio quality

On 9/27/2020 3:09 PM, Bill Frantz wrote: Has anyone seen these symptoms? Do you have any fixes? Bill, One thing I've seen with Windoze laptops is the OS switching the audio input to the decoder to the computer's built-in mic. You'll get decodes, but not nearly as many as usual. :) The

Re: [Elecraft] SVGA Screen save to memory stick

Use the P3 menu to set one of gibe sict buttons to this feature and when you wish to save a screen, just tap the button. Don’t have a P3 anymore but this worked for me. Utility save only saves to computer file. The button saves to USB stick. Sent from my iPhone ...nr4c. bill > On Sep 27,

[Elecraft] Elecraft CW Net Report

Good Evening,    Neither band was very noisy.  There were different types of QSB, sometimes simultaneously.  One of them was like the picket fencing you get on FM.  It made copy interesting.  Mild to warm fall weather was reported with a few antenna projects.  Smoke and then rain have

Re: [Elecraft] Does the K4 support IPv6?

No answer? On Thu, Sep 24, 2020, 5:25 PM Christopher Hoover wrote: > > Does the K4 support IPv6? > > 73 de AI6KG > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

Re: [Elecraft] SVGA Screen save to memory stick

Excellent idea! __ Clay Autery, KY5G (318) 518-1389 On 09/27/20 03:03, Nr4c wrote: Use the P3 menu to set one of gibe sict buttons to this feature and when you wish to save a screen, just tap the button. Don’t have a P3 anymore but this worked for me. Utility save only

Re: [Elecraft] SVGA Screen save to memory stick

I've done it on my P3 w/ SVGA kit installed many times.  I have a screensaver set and I take captures of RFI. Haven't done it in a while, so forgive me if I don't write a tutorial. But it most definitely works if you have SVGA installed and updated firmware. __ Clay

[Elecraft] [Elecraft} KAT3A

Because the KAT3A was marketed both as a replacement for the KAT3 and as a component of new K3s rigs, its installation instructions show how to remove the previous antenna tuner card, if necessary. Please consult the first 10 pages of