In a recent message, Wayne Burdick n...@elecraft.com wrote ...
The latest field-test revision is 3.40, which also includes several
new features.
Do the new features include the facility to enable a preset MON level
when retransmitting DVR off-air recordings?
73
--
David G4DMP
Leeds, England,
Wayne Burdick wrote:
I plan to eliminate the need for these meta-commands in a future
release. Commands that are modal, such as FW, will be replaced with
non-modal commands.
Do those plans include unambiguous reporting of SPLIT status, and
commands to control audio routeing for SO2R/SO2V
Hugo pa4la wrote:
I am playing with my Microham MK2 and have learned that,
the K3 must be in extended (k31) command mode for the MK2 to switch
correct
between audio or fsk data modes
When the K3 is powered on, the mode setting is always standard k30.
Putting the k31 command via a
Joe,
I thought we were talking about a Microham Router command that does not
work at times until the user issues a terminal K31 command manually.
Yes, the user power cycled the K3, but I believe proper software should
recover from that event with no input from the user - that usually comes
I have built more than 285 K2's to date. Let me build one for you.My
prices are reasonable and you receive a new K2 with the options you want.
Please respond off of the reflector.
73
Alan
W1HYV
Have you found a configuration(s) that can replicate the audio blast event?
What will be the possibility that it won't occur again as it wasn't
anticpated in the release (3.25?) that caused the problem?
73
Elliott WA6TLA
- Original Message -
From: Wayne Burdick n...@elecraft.com
To:
Don,
I thought we were talking about a Microham Router command
that does not work at times until the user issues a terminal
K31 command manually.
No, we are not talking about ANY Router command. microHAM
interfaces (DigiKeyer, microKEYER, microKEYER II and MK2R/MK2R+)
can generate FSK
Humble opinion time...
Having K31 persist across reboots might be a Bad Idea too. It's a
mode dependency, meaning more than one state might be possible at
start-up time. This may cause some PC programs to go into brainlock
if K31 responses are not what's expected. Plain K3; is what most of
Question!
I've noticed a lot of angst from other K3 customers concerning front-panel
mounted switches and
their habit of FAILING as of late! Is this a quirk of manufacturing
processes that Elecraft
LET slip by OR is it only random and only a few units sent out that were
affected???
I think we've beaten this one to death.
My goal is to completely eliminate the need for the K2x and K3x meta
commands. No more modality, no more issues. Thanks in advance for your
patience.
Wayne
N6KR
__
Elecraft mailing list
Home:
Wayne,
Will your command changes incorporate the ability to read and
write to the K3 memories ?
73
Stewart G3RXQ
On Fri, 2 Oct 2009 09:15:35 -0700, Wayne Burdick wrote:
I think we've beaten this one to death.
My goal is to completely eliminate the need for the K2x and K3x
meta
commands. No
HI Wayne
I think this is possible without big changes !..
Good luck, Laurent F6DEX
I think we've beaten this one to death.
My goal is to completely eliminate the need for the K2x and K3x meta
commands. No more modality, no more issues. Thanks in advance for your
patience.
Wayne
N6KR
That's on the list.
73,
Wayne
N6KR
On Oct 2, 2009, at 9:27 AM, Stewart wrote:
Wayne,
Will your command changes incorporate the ability to read and
write to the K3 memories ?
__
Elecraft mailing list
Home:
Yes, Bill, I sent a similar post some time ago but it seems there's a secret
there...
Maybe they are not getting the parts etc. a scheduled.
But the manual??
73 Richard - HB9ANM
NZ0T wrote:
Apologies for being a nag about this but I'm currently without a decent
SWR/Watt meter and anxiously
HI Wayne
The day you work on the protocol, contact me again... my own list (sent to
you) could be updated !.
Nothing critical however... Except may be the problems that may result from
the CONFIG:VFO OFS=ON and interaction with the Band stacking memory.
Anyway K3's protocol is reliable and it
We have had excellent reliability with the K3 FP switches - actually
much better than on past rigs I've owned. Don't forget that many of the
other K rigs (K1, K2, K3, KX1) have been out there for 8-10 years. We
watch this carefully here both in manufacturing and via tracking our
customer
I said I was not going to post any more on this subject, but I tried the
K3 command because W4TV reported that it does not send a response when
queried, but changes its CAT response.
I find that the K3 does indeed report the mode as indicated in the K3
Programmer's Reference. Here is my
No, but this is high on my list.
(I've given up trying to do everything at once.)
tnx
Wayne
On Oct 1, 2009, at 11:23 PM, David Pratt wrote:
In a recent message, Wayne Burdick n...@elecraft.com wrote ...
The latest field-test revision is 3.40, which also includes several
new features.
Do
I'm wondering if the original question was really about the concentric
knobs. At one point I heard of a few problems ... but usually by the
time I'd anything hear it was, I'm amazed Elecraft got the new knobs
out to me so quickly!.
Mark AD5SS
On Fri, Oct 2, 2009 at 11:57 AM, Eric Swartz -
I said I was not going to post any more on this subject, but
I tried the K3 command because W4TV reported that it does not
send a response when queried, but changes its CAT response.
Will you get it through your head that this is not an issue
of the behavior of the K3x; command? This is
I have the K2 Twins setup for sale/trade.
http://n2.nabble.com/file/n3757378/K2%2Bwins.jpg
I listed this rig before but had to remove the listing. The KAT100 had to
have 2 diodes replaced. It is up and running as it should now.
K2 options
KSB2 SSB Adaptor
KNB2 Noise Blanker
KAT2 20 watt
Sorry Joe,
The user said he was having a problem with the Microham MK2 - he did not
say that he was having problems with anything else, so I figured he was
using some Microham MK2 native commands for which the Microham MK2 was
originate the commands.
Yes, if the commands originate in some
KXPD1 and bracket sold
Pelican Case is SOLD
pkhjr wrote:
pkhjr wrote:
For sale KXPD1 paddle with the K2 mounting bracket, if bought from
Elecraft the two items run over $140. Sell for $80 plus shipping.
Also have Pelican Case setup for K1, $25 plus shipping from 75163.
I have K-3 2746. Running the current firmware 3.41 etc. I have not seen
100w output from this radio ever. I hooked up my cantenna and ran the
tx gain through the k-3 utility and get the following numbers for tx
gain along with the corresponding power output
band tx gain number power
The power supply I am using is an Astron 35M. I checked the voltage
13.8 output.
Mike/aj9c
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
This is a troll.
Steve
N4LQ
n...@carolina.rr.com
- Original Message -
From: JIM DAVIS nn...@astound.net
To: elecraft@mailman.qth.net
Sent: Wednesday, September 30, 2009 7:20 PM
Subject: [Elecraft] Eric-WA6HHQ
Question!
I've noticed a lot of angst from other K3 customers concerning
The 5w calibration was 5.3 on each band. The 50w calibration showed 42w
each band.
aj9c
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Mike,
The 5w calibration was 5.3 on each band. The 50w calibration
showed 42w each band.
You need to get that right do the manual 5 and 50 watt
calibrations on 20 meters before doing the K3 Utility gain
set calibrations.
Note you are seeing almost exactly twice the 42 watts ...
In any event I want to see 100w output which Im not seeing ideas or
suggestions would be appreciated.
Mike/aj9c
You're not alone: I too have less than 100 watts output from my
month-old K3. The supply voltage is 13.6 volts under load at the
Elecraft pigtail. I have an Autek WM1 and two Bird 43
29 matches
Mail list logo
