Instead of? I have an LP-Pan (and an appropriate sound card), also 2
PMSDR, both of which work. I ama very space-limited, and got tired of
the little critters skating around on the desk. I also like the tight
integration of the P3 with the K3. It seems to me OK to have a Subaru
and a Kia in
Hello Al,
I'm not sure from your post if you are looking for a receiver only or a qrp
transceiver.if receiver only, look at the eham reviews of the Degen 1102
and/or it's cousin the Kaito 1102 (same radio, different color/branding). My
review is on page two.follow this link :
Thanks for all of the inquiry..both units are sold.
73
Steve
K3WKM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This
Well, I believe I've answered your twice-asked question. Here is further
elaboration. You have made a number of faulty deductions: e.g. (1)
assuming I don't like the way it works, [re the P3; not true]; (2)
assuming that the LP-Pan that seems to work the way you want it to,'
[not true]; (3)
Sorry. I answered Dick off line. here is the solution for those who are
interested.
--
Dick,
Got it! MN023;MP001;MN255 for BYP and MN023;MP002;MN255 for AUTO
Thanks Dick. Now that I know how to do that, there are many more
commands to play with. Can you chain these commands or do
This project is for fun and also will allow me to use my pan adapter remotely
I hope.
One thing I neglected to mention, you will need a VGA capture board to get
the video onto the pc.
--
View this message in context:
On 4/10/2012 7:37 AM, John Ragle wrote:
Third, with the exception of NaP3, available software for LP-Pan or
any of the SDRs is terribly designed and tends to take up an entire
screen in itself.
NaP3 is just as bad as any of the other software for LP-PAN (or any
other IF/soundcard based
I was curious why you didn't mention this at first -- I was trying to figure
your intent in your design. I used to work with frame grabbers a long time ago
(late 1980s) on very expensive graphics equipment (over $100K per screen). A
frame grabber back then was a $20,000 option. Yes, I know
The posted preliminary KX3 manual files are 10MB and 2MB, respectively, and
both are listed as Rev A3, issued on 3/25. Is this an error? Are they
not two different revisions? Which is the latest? Thanks.
--
View this message in context:
They both contain the same text and diagrams. The 10 MB file has high
resolution diagrams and pictures.
Some like to have the larger files, but my preference is for the smaller
one - it loads faster into Adobe Reader.
73,
Don W3FPR
On 4/10/2012 11:20 AM, hlkent wrote:
The posted preliminary
Thanks, OM.
Regards,
Howie
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Two-Different-Owner-s-Manuals-but-with-Same-Version-Info-tp7453215p7453361.html
Sent from the Elecraft mailing list archive at Nabble.com.
W4CCS,
The next version of SVGA firmware has a 'bias' feature that allows the user
to increase the waterfall coloring threshold.
73,
Paul
W4CCS wrote
For what its worth, I have the same problem as Larry. The waterfall on
the P3 is OK but NOT on the VGA monitor. It seems as if some
Bought these, never used the LP-PAN and then decided on the P3. $170, shipped.
Please contact me off-list if interested. (n...@comcast.net)
73,
Dave N8AG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Thanks Paul.
that will help me! Waterfall is too dark on the external display when
is set where i like it on the P3 display. I just set it in between but
will enjoy the bias setting.
Also noticed a calibration difference between the two displays. Looks
like they are about 3-4 dB different
FS: K2,#5676, $ 600.00 shipped/insured US only.
Plus;
SSB module
DSP module
NB module
Tilt stand
Manuals
Modules assembled but not installed or alligned.
K2 needs a little tweaking and allignment,otherwise like new.
Cosmetics are mint.
7 day return if not satisfied.
Ed N4ZUM
(205) 577-2614
There are not too many frame grabbers out there which support VGA. The one I
am using is an Avermedia Game Broadcaster HD PCIe board. It has VGA in and
HDMI as well. It will support up to 1920x1080x60 with no flicker, delays
etc. It costs around $140. Of course once you add up the
The K2 outfit has been sold.
Thanks to all who responded to the ad so quickly.
72,
Ed N4ZUM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
traffic has stopped again
Bob K3DJC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
I've been told that the calibration difference is a known bug that will be
fixed.
On 4/10/2012 9:58 AM, Tom Azlin N4ZPT wrote:
Thanks Paul.
that will help me! Waterfall is too dark on the external display when
is set where i like it on the P3 display. I just set it in between but
will
On 9 Apr 2012 at 15:10, Don Wilhelm wrote:
No need for any adapter to the K3 - just plug into the rear panel
jacks and turn the rear panel mic bias on. Others have mentioned that
moving the TX EQ first two bands all the way down, the 3rd band down a
bit and adding a few dB for the upper 2
Howdy Ya'll
I'd dearly love to see a Now accepting orders for the KAT500 on the
Elecraft website. It would give us a chance to get our name on one at the
earliest opportunity. With my...unusual...antennas it will give me about 5
more bands!!
73...de...Fred N9TA
I've started to notice when I first turn on my K3/100 (#6131). there appears to
be a delay in reaching full RF output. I start calling a station and notice
almost no RF or audio but after a minute or so, the power is full scale and the
Audio level is working fine. Any suggestion why this may be
On 4/10/2012 2:05 PM, Fred Bennett N9TA wrote:
I'd dearly love to see a Now accepting orders for the KAT500 on the
Elecraft website.
Wouldn't we all! The last report here was that the engineering
department is putting serious effort into optimizing the design and
manufacturing details. I
Folks, Time to end this thread.
73,
Eric
List Moderator
---
www.elecraft.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
I notice that the current version is the 1103. Think it's the same specs?
Sent from my iPhone
On Apr 10, 2012, at 2:54 AM, rck...@comcast.net wrote:
Hello Al,
I'm not sure from your post if you are looking for a receiver only or a qrp
transceiver.if receiver only, look at the eham
Me too! ;-)
First painted and silk screened sheet metal is now here for testing with
the KAT500 pc boards (we had unpainted protos before that). We're now
getting all of the material logistics and final firmware ready. We are
working hard to get this ready for ordering ASAP.
It looks great.
The items have been sold to the first person who responded that they would take
them. Thanks to all for the surprising number or quick responses.
73,
Dave N8AG
__
Elecraft mailing list
Home:
To clarify a bit - This posting was intended to close the thread of
criticisms and somewhat un-cordial pro/con discussion on the topic. It
was not meant to negatively impact the original author of this thread.
He can feel free to post updates and ask additional questions as needed.
Please
Good show. These f
Sent from my iPhone
On Apr 10, 2012, at 6:11 PM, Eric Swartz - WA6HHQ, Elecraft
e...@elecraft.com wrote:
To clarify a bit - This posting was intended to close the thread of
criticisms and somewhat un-cordial pro/con discussion on the topic. It
was not meant to
Meant to say these apps, etc make it all more fun.
Sent from my iPhone
On Apr 10, 2012, at 6:11 PM, Eric Swartz - WA6HHQ, Elecraft
e...@elecraft.com wrote:
To clarify a bit - This posting was intended to close the thread of
criticisms and somewhat un-cordial pro/con discussion on the topic.
On Tue, Apr 10, 2012 at 3:37 PM, Dr. Werner Furlan fur...@gmx.net wrote:
I have very little hair on my head...
A problem that has vexed mankind through the ages.
Tony KT0NY
--
http://www.isb.edu/faculty/facultydir.aspx?ddlFaculty=352
Sent from my iPad
On Apr 10, 2012, at 8:36 PM, Tony Estep estept...@gmail.com wrote:
On Tue, Apr 10, 2012 at 3:37 PM, Dr. Werner Furlan fur...@gmx.net wrote:
I have very little hair on my head...
A problem that has vexed mankind through the ages.
Tony KT0NY
--
fyi
Eric
---
www.elecraft.com
Original Message
Subject:[KX3] Unboxing the KX3
Date: Tue, 10 Apr 2012 23:34:46 -
From: eds_aristotle
I made a video of the unboxing of my KX3. Please excuse my excitement.
http://youtu.be/rqvO3rTwa-Y
__ !-- #ygrp-mkp {
wow, does that ever look neat!
Al ve3gam
- Original Message -
From: Eric Swartz - WA6HHQ, Elecraft e...@elecraft.com
To: Elecraft Reflector elecraft@mailman.qth.net
Sent: Tuesday, April 10, 2012 9:23 PM
Subject: [Elecraft] Fwd: [KX3] Unboxing the KX3
fyi
Eric
---
Nopethe 1103 is a different radio.
- Original Message -
From: Bill Tubbs cgpi...@yahoo.com
To: rck...@comcast.net
Cc: wb5...@centurytel.net, elecraft@mailman.qth.net
Sent: Tue, 10 Apr 2012 22:42:19 - (UTC)
Subject: Re: [Elecraft] Suggestions/WTB: inexpensive portable HF
35 matches
Mail list logo
