In addition to confirming this happening, I did another quick check. It DOES
operate properly and follow VFO B when SPLIT is on, whether or not you have the
sub receiver enabled, just not with the XIT.
If SPLIT is off, the KAT500 follows the main receiver and the sub-receiver
tuning has no
Sean,
You don't even need a computer interface with the kx3. Buy the $19 cable set
elecraft sells
for this purpose and your ready to rock. I am using my new kx3 with nothing
more than audio in/out
to my laptop and the included USB cable for control via HRD. Works great. I
managed a 5 watt
Hi folks,
Is there any word on when the 2m module for the KX3 will be available?
There are several 2m repeaters in my area (around Tampa FL) and it would
be nice to access them. I know the Elecraft website says coming soon,
but I was wondering what that means!
Also, I was told that it would
Sean,
The time for the calls sign to show up in the FCC ULS database depends mostly
on the speed of the VE/VEC giving the test and processing the paper work. A
friend of mine had his call in the ULS database about 3 days after his test.
I think that is the fastest I ever heard of. The
Yep. I operate RTTY/PSK/JT65 in DATA A/AFSK mode with my K3 using 2 $5
stereo cables from Radio Shack, and N1MM, MixW, or WSJT. I did it for
quite awhile with my K2 -- headphone jack to soundcard LINE IN and
soundcard LINE OUT to the mic connector through a little T-pad I built
into the
My interest in 6M goes back to that memorable solar cycle around 1958,
when from my QTH in WV I worked ZS in the morning, W6, in the afternoon,
KH6 a bit later with a ground plane and 25W AM. As an active CW op on
HF, I had great fun keying my 2E26 rig to work AU. 40 years later, I
enjoyed 6M
This OT 6 meter thread has been beaten to death and is probably ready to
be retired so I have just a couple points and I'll quit. The magic band
has always been there, and has always been lots of fun. Like many
others, I have enjoyed 6M since the late 1970s. I would have been bored
to death if
Hi folks!
The big moment - I just ordered my KX3! I decided to splurge and get the
ATU, roofing filter, and... the keyer paddle. *gulp* Guess I'm committed
to learning Morse now! (Well, I did get a mic as well. Gotta give myself
something to do until I can learn the code.) I'll be getting
Sean,
Congratulation on your decision. You will like it. Plan on
spending some time really learning how powerful a capability you have
invested in, and then go out and work the world. Very best of luck.
73,
Barry
K3NDM
On 2/27/2014 2:08 PM, Sean Wall wrote:
Hi folks!
The big moment -
My husband (N1QQP) passed away in 2013 and I would like to sell his K2,
with extras, as I do not have a license to use this, nor do I know
anything about radios.
Members of his radio club have checked the K2 out and it is working
perfectly. It is unfortunate that he passed away just a couple
Barry,
I am happy to report that DX4WIN is back to normal today and posting split
RTTY spots correctly. I have no idea what was going on yesterday!
Dave, N4QS
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dave Perry
Dave,
I just tested it and mine is working, too. Crazy!
I wonder if there's some glitch in the code related to the date or time.
Barry W2UP
On 2/27/2014 12:22, Dave Perry wrote:
Barry,
I am happy to report that DX4WIN is back to normal today and posting split
RTTY spots correctly. I have
Wow, it's a bumper crop of excitement. Just got notified that my call sign
is in the ULS database. I've been assigned KK4YPE. Now it's *really*
official. ;)
-73 Sean
KK4YPE
On Thursday, February 27, 2014, Sean Wall seancw...@gmail.com wrote:
Hi folks!
The big moment - I just ordered my KX3!
Or Yipes -- Oops no i in there :-)
Congratulations, Sean. Once, in Aug 1953, I felt
just as you seem to today!
I also have a KX3 on order to join my K3/P3 combo
(and my first two Elecraft rigs, K2 and K1).
Elecraft gets it right.
73, Phil w7ox
On 2/27/14, 12:36 PM, Sean Wall wrote:
Wow,
I think it is a contraction of Yippie!!
On Feb 27, 2014, at 12:43 PM, Phil Wheeler w...@socal.rr.com wrote:
Or Yipes -- Oops no i in there :-)
Congratulations, Sean. Once, in Aug 1953, I felt just as you seem to today!
I also have a KX3 on order to join my K3/P3 combo (and my first two
Congrats! You have picked an awesome transceiver as your first rig! As a fellow
newbie (38 months), you will find the folks on this reflector to be nice and
accommodating to all manners of questions related to the hobby and Elecraft
equipment.
Good luck 73,
Keith
AK6ZZ
Sent from my iPhone
The K3, KPA500, and KAT500 all have new production firmware releases available.
All three must be updated to take advantage of major improvements to the KAT500
and KPA500. (Some of you may have already loaded these as beta releases.)
We've added a new feature that allows the KAT500's network
Congratulations, Sean. Welcome to a great hobby. Consider the CW Operators
Club CW Academy, http://www.cwops.org/cwacademy.html as a path to Morse
Code proficiency. There is a backlog for online classes, so you may have to
wait a bit. During that time, learn to use your KX3 on SSB and how to tune
I have just finished my KAT100, and am having an issue during the Power
Calibration of R3 and R4. I am using a K2 with KAT2. I have a cable
running from the Ant 1 jack of the KAT2 to the Ant 1 jack of the KAT100.
The KAT100 RF In jack is connected to the Transmitter jack of the power
sensor of
Jeremy,
You did not mention it, so I have to ask - when connected as you
describe, did you first obtain a good null at U5 pin 3 (by adjusting
C31)? That is a necessary first step. If you did not get a voltage
measurement in the single digit millivolt range (less than 10
millivolts), then
Factory assembled LP-PAN for the Elecraft K3 for sale.
Serial number 00712. I purchased this new and never used
it. New in box. Power cable included. $1149 plus $10 USPS
priority mail shipping.
PayPal preferred by will take personal check or credit card.
Photo on eHam Classifieds
73
Bill AA7XT
$149 not $1149 for LP-Pan K3!!!
Sorry about that.
Bill AA7XT
On Fri, Feb 28, 2014 at 2:40 AM, William Hein bill.aa...@gmail.com wrote:
Factory assembled LP-PAN for the Elecraft K3 for sale.
Serial number 00712. I purchased this new and never used
it. New in box. Power cable included. $1149
Wayne,
Sweet!
Thanks,
Bill - W0BBI
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
23 matches
Mail list logo