Hello
how can I change the CW Sidetone Pitch via the remote interface?
I want to set it to a absolute value e.g. 550Hz.
Unfortunately the CW command is only for reading.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/CW-Sidetone-Pitch-remote-change-tp7590762.html
Sent
Which radio?
73, Matt VK2RQ
On 1 Jul 2014, at 4:59 pm, Rooby sdftrb4...@hotmail.de wrote:
Hello
how can I change the CW Sidetone Pitch via the remote interface?
I want to set it to a absolute value e.g. 550Hz.
Unfortunately the CW command is only for reading.
--
View this
sorry forgot, KX3
--
View this message in context:
http://elecraft.365791.n2.nabble.com/CW-Sidetone-Pitch-remote-change-tp7590762p7590764.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home:
If you were talking K2, then I was going to say it may be possible with SW
command, but not really recommended since you may have to realign your filters.
Then again, if you store the alignment values for different pitches in
advance...
But since you talk about KX3, then it seems you are
From: Alan Bloom n...@sonic.net
Don,
... as I tuned the P3 waterfall started
shifting as I tuned. I have the P3 setup to be fix track
|Check the FixMode menu selection. |It sounds like it might be set to
|Slide.
I just checked that. It wasn't that. It's set to half span. It is almost like
I wish to report in after our radio club Field Day with glowing results using
the KX3 and KXPA-100 combo
on CW operating as W1PBR from Thomaston, Maine. We were able to work over 700
QSOs using an OCF Dipole while another 100 watt radio was up in the phone band
on 40 and 20 during our
Thanks for your reply,
Yes you are correct I would like to automate the sideband suppression
procedure and there it is stated to set the CW sidetone pitch to 550Hz which
I have no idea how to do this remotely.
I did not find any way to do in the programmers guide.
--
View this message in
MacLoggerDX and MacLoggerDX HD (for the iPad) are the best loggers i've found
for my Macs.
Very visual and VERY easy to setup/use.
They don't do rig control besides the normal QSYs when clicking on spots. But
they do work with a bunch of rotators.
And support from the developer is awesome.
Page 8 of the Programmer's Reference.
CW (CW Sidetone Pitch; GET only) RSP format: CWxx; where xx is 30-80
(sidetone pitch in 10 Hz units).
73 de Dick, K6KR
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Rooby
Sent: Tuesday, July 01, 2014 4:25
That indicates to me that your soundcard ADC is being overdriven, or
that you have a bad soundcard.
73,
Don W3FPR
On 7/1/2014 1:02 AM, David Cole wrote:
Here is a bit more info on the issue...
If my friend moves his frequency just out of the radio passband, as
shown on the P3, the problem go
Yes CW command is possible but only for reading not for setting the value.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/CW-Sidetone-Pitch-remote-change-tp7590762p7590772.html
Sent from the Elecraft mailing list archive at Nabble.com.
I see that now. Sorry for not reading carefully enough.
Dick
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Rooby
Sent: Tuesday, July 01, 2014 6:08 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] CW Sidetone Pitch remote change
Yes CW
That indicates to me that your soundcard ADC is being overdriven, or
that you have a bad soundcard.
73,
Don W3FPR
The sound card could also be overdriven if another unrelated program has
changed the settings.
73 from Ian GM3SEK
-Original Message-
On 7/1/2014 1:02 AM, David Cole
I've looked at logging with an iPad and haven't found it satisfactory yet
-- but I haven't tried a Piglet. Just what control does the Piglet allow
with an iPad?
(1) Can it fetch the frequency in use from the rig (K2 or KX3)? (I think
yes.)
(2) Can it enter a frequency from the iPad?
(3) Can
Hi,
We are starting to focus on the Signalink soundcard itself... I can't
imagine it is the Elecraft K3 failing, as a dead carrier does not cause
the spray, only when audio is being supplied to the transmitter, and
only when from the Signalink, does the problem happen...
--
Thanks and 73's,
But why will not the K3 filters take care of any too wide signals
coming from the SignalLink?
.
On 1 July 2014 16:11, David Cole d...@nk7z.net wrote:
Hi,
We are starting to focus on the Signalink soundcard itself... I can't
imagine it is the Elecraft K3 failing, as a dead carrier does not
I am running JT65, the bandpass is on the order of 1 to 2 KHz, the
signalink is spraying across at least 1 KHz. with wideband noise.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for
While I hate to point fingers in this situation, the symptoms are
that of an unstable (noisy) sound card. Given the documentation
of insufficient filtering, regulation and bypassing in that
particular device, a noisy USB power line (remember the computer
power supplies are switchers with the
I am considering using my K3 with an Ameritron AL-811H linear amplifier. Yeah,
I know, the KPA-500 runs circles around it… but budget is tight here. Are there
any interface problems that I should be aware of? If so, are there any fixes
for them? Please let me know. Thanks.
Ramón Tristani, NQ9V
Hi Joe,
The fellow is aware it is something on his end... I have been trying to
pin it to something on my end, and just can't... We have known each
other for years and are on good enough terms that we can talk about it
with zero issues... He is pretty sure it is the sound card as well...
We are
Very straight forward to use a tube based amplifier. I ran an AL80A for
a year with the K3 before I took the expensive leap. RF out of the K3
into the amp - out of the amp into a tuner - out of the tuner into the
antenna. A PTT line from the K3 to the amp. That is all you need.
Be sure to
I've used my K3 with both an Ameritron AL-800H and Ameritron ALS-1300 with
no interface issues whatsoever.
Tim
AE6LX
On Tue, Jul 1, 2014 at 8:12 AM, Ramon Tristani r.trist...@gmail.com wrote:
I am considering using my K3 with an Ameritron AL-811H linear amplifier.
Yeah, I know, the KPA-500
Thank you for the advice. Much appreciated.
73,
Ramón Tristani, NQ9V
r.trist...@gmail.com
http://www.tristaniministries.org
On Jul 1, 2014, at 11:47 AM, Tim Tucker ae...@worldwidedx.com wrote:
I've used my K3 with both an Ameritron AL-800H and Ameritron ALS-1300 with no
interface issues
When will the 2 meter manual be ready for download?
Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
Prob when the modules are ready to ship.
Sent from my iPhone
...nr4c. bill
On Jul 1, 2014, at 12:00 PM, Tony Rowland biggsbigb...@gmail.com wrote:
iPad
___
__
Elecraft mailing list
Home:
Mine works perfectly, but I do NOT connect the ALC line.
I only connect the Relay line..73 Ken VE3YK
On Tuesday, July 1, 2014 11:50:40 AM, Ramon Tristani r.trist...@gmail.com
wrote:
Thank you for the advice. Much appreciated.
73,
Ramón Tristani, NQ9V
r.trist...@gmail.com
I use an AL-811H and the K3. Just use a RCA to RCA plug to key the amp from
the K3. I have my K3 setup to 50W.
No issues.
- Original Message -
From: Ramon Tristani r.trist...@gmail.com
To: elecraft@mailman.qth.net
Sent: Tuesday, July 01, 2014 10:12 AM
Subject: [Elecraft] Ameritron
Hi
I have an issue with my K3. I keep the antennas physically disconnected here
and the radio had not been turned on for a week or so. Turned it on last night
and it initially worked fine. Made a few Qs on 6m.
I then noticed that I could not switch the VFOs back and forth using the A/B
Another thing to try is load the FPF firmware again. The FPF must match the
MCU, that is, when a set of firmware files is released, don't just load one
file from the set.
Dick, K6KR
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ellam,
Timothy
What recommendations for Linux logging/operating would fellow hams recommend
and why? This would be for use with a K2/KPA100 of recent vintage.
Thanks, Tom KG7CFC
--
To be free is not merely to cast off one's chains, but to live in a way that
respects and enhances the freedom of others.
-
The best option would be CQRlog. Great features and also great integration with
FlDigi. The best LoTW and club membership tracking I've seen.
73 Mike K5TRI
Sent from my amazing Windows Phone
From: Thomas Taylormailto:li...@comcast.net
Sent: 7/1/2014 11:03 AM
I have to agree with Sal, I've tried several Mac logging programs. HamLog is pretty
darned good on the iPad and iPhone for quick logging when I'm not doing a lot and don't
want to bother with a computer. But I use MacLoggerDX on my Mac and really like it a lot.
It isn't a real contest logger,
I would look CQRLOG. It is fully supported, does HAMLIB and FLDIGI. I have not
seen anything better for a true Linux logging software!
Will WC2L
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Thomas
Taylor
Sent: Tuesday, July 01, 2014 2:03 PM
I guess I've blown the speaker amp IC in my K3 again. This is
the third time this has happened, twice in one radio and once in
another.
In this case, the radio had both the AF Output Mod Kit (pair of
470 ohm resistors) and the E85056 Audio Protection Assembly
Circuit Board installed.
I
It sounds like there may be another fault in your system. Are you hooking up to
any powered external speakers or phones?
73, Fred, AE6QL
-Original Message-
From: Dave Hachadorian k6ll.d...@gmail.com
Sent: Jul 1, 2014 12:28 PM
To: Reflector Elecraft elecraft@mailman.qth.net
Subject:
From: Tony Rowland biggsbigb...@gmail.com
To: elecraft@mailman.qth.net elecraft@mailman.qth.net
Subject: [Elecraft] Kx 3 2 meter manual
Message-ID: d42bfb2f-045b-4ace-a21a-d0c3c984a...@gmail.com
Content-Type: text/plain; charset=us-ascii
When will the 2 meter manual be ready for download?
Some years ago I learned to take only expendable
items to Field Day: Myself :-)
Otherwise I give items to the Club: Those things
always seem to survive!
Phil W7OX
On 7/1/14, 12:28 PM, Dave Hachadorian wrote:
I guess I've blown the speaker amp IC in my K3
again. This is the third time this
With SLP=0 and THR=20 you have essentially *no* AGC action. That
means nothing is protecting the audio amplifier from strong inputs.
I leave it to Wayne or Lyle to calculate the overall gain from noise
floor to maximum DSP output but if one has set the audio for comfort
on a S4-S6 signal the
Ramon:
If you do any CW, you might want to experiment with the TX DLY
settings. I have seen where many suggest changing the setting from
008 to somewhere around 020. You will have to
find which setting works best for you. Other than that you should
have no problems using your amp.
73 De
It works fine, but if you're a cw op, don't expect QSK operation without
some extra hardware. With my AL-811H, I also used the Ameritron QSK-5
(with appropriate mod to AL-811H) to achieve QSK. It worked very well --
but not *quite* as very well as the KPA500 which I'm using now ;-)
73, Dale
On 7/1/2014 4:10 PM, Joe Subich, W4TV wrote:
more power, the 3.1W amplifier is going to die when asked to produce
more than 150 W of peak power.
In a properly engineered design, the amp may clip like crazy, but it
should be able to survive such abuse indefinitely
73, Ross N4RP
73,
The Austin Summerfest is August 1 and 2.
http://www.austinsummerfest.org/ at the Crowne Plaza in Austin.
I believe the hours are 6 to 9 pm Friday and 8 AM to 3:30 PM Saturday.
We are looking for 2 or 3 Elecraft Enthusiasts who would like to show
off their Elecraft gear and share their
On 7/1/2014 3:46 PM, Lisa Jones wrote:
The Austin Summerfest is August 1 and 2.
http://www.austinsummerfest.org/ at the Crowne Plaza in Austin.
ELecraft will provide the table (1 or 2 depending upon the equipment
available to demonstrate), table cover, banner, literature and your own
Talked to Eric at the HamRadio show in Friedrichshafen - he said about
September.
Elecraft also presented the new PX3 - really cool!
73
Gernot, DF5RF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
My posting this morning about blowing the speaker amp chip was in
error. Further investigation reveals that I actually blew out
the K3's internal speaker. Ohmmeter measurement at the speaker
terminals shows that the coil is wide open. This is really good
news, because the speaker is easily
One issue that someone obliquely mentioned in the various
replies that I feel requires greater emphasis, is that the
SignaLink USB box is, first and foremost, a sound card
and as such requires a great deal more current than a typical
USB device and should be plugged into a *powered* USB
hub.
Bought a KX3 in June
Trying to use the iSDR app on an iPad 4 to get portable panadapter
functionality.
Bought a Lighting to USB Camera adapter (Apple Brand) at Best Buy
Bought a Griffin iMic on Amazon because I couldn't find it at Best Buy or
Frys.
Plugged in to iPad 4. After a few second get
I think it worked up thru iPad-3. Not sure but it works with wife's 2.
Sent from my iPhone
...nr4c. bill
On Jul 1, 2014, at 10:02 PM, Jenn Hughes 73.n...@gmail.com wrote:
Bought a KX3 in June
Trying to use the iSDR app on an iPad 4 to get portable panadapter
functionality.
Bought a
I have the KX3, iMic, USB lightning adaptor, and iPad Air. They all work
together fine. I have used the iMic and adaptors starting with the original
iPad, iPad2, iPad3, and now Air, it has worked on all of them. I have been
using them for a few years now, including with the old 30-pin
Check to see if you have corroded pins on the front panel.
Elecraft has a mod for older K3's that switch them to all gold pins to
prevent this.
You can always take the front panel off, and reseat them.
Keith
KB9WMJ
- Original Message -
From: Ellam, Timothy St. J. tel...@mccarthy.ca
50 matches
Mail list logo
