The K2 case Rose custom made for me [with space for batteries, paddle,
log, audio amp, and headphones for field operation] is perfect, just
what I wanted, and as Howie says, tough as nails. Mine's been to a
number of summits, it fits very cleanly into my pack with room for the
AlexLoop, and
wunder,
After building an adapter using a TRRS plug for myself, I had a
head-slapping reaction to your solution. It should work wonders for
not only the CM500, but also for most any other microphone designed to
be used on a computer - most, if not all, have the tip and ring
connected
I sent you an email sir.. I need to find out why my emails aren't showing
up.
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Joe
Word
Sent: Monday, August 17, 2015 7:11 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 CW Filters For Sale
Don Elecraft:
I'm having difficulty connecting to either my KAT500 or W2 via a serial
cable. Is the KSXER (3.5mm to DB9-F) any different from the standard 3.5mm
to DB9-F that I already own?
Brian KD0HII
__
Elecraft mailing list
Hi:
I would like to purchase a KPA500. I thought I would check out the
used market before purchasing a new one. If you have one that you are
willing to sell, please
state condition and your price. Tnx.
Mike at ve3yf dot com
73 De Mike
VE3YF
http://www.ve3yf.com
Make sure you have PREAMP2 in the Config menu set to 'ON' on 10 meters.
It is set on a per band basis.
Mike - KI0HA
On 8/17/2015 3:01 PM, Nr4c wrote:
It works as it should on 12 and 6 meters but on 10 meters pressing PRE shows
Pre1 then OFF then Pre1 them OFF. Anyone else have this
Date: Mon, 17 Aug 2015 12:41:45 -0800
To: Elecraft Reflector
From: Edward R Cole kl...@acsalaska.net
Subject: Re: [Elecraft] Full duplex for Sat work?
Jerry,
Its tempting to think maybe the sub-Rx could be used duplex with
main-Tx in the K3, but as you discovered its not possible as DSP is
All of the filters are sold.
Thanks,
Joe N9VX
On Mon, Aug 17, 2015 at 7:10 PM, Joe Word n9vx@gmail.com wrote:
The KFL3A-400 is still available. The 250 and 1.0K are sold.
Joe N9VX
On Mon, Aug 17, 2015 at 12:39 PM, Joe Word n9vx@gmail.com wrote:
I have three 8 pole K3 CW
The KFL3A-400 is still available. The 250 and 1.0K are sold.
Joe N9VX
On Mon, Aug 17, 2015 at 12:39 PM, Joe Word n9vx@gmail.com wrote:
I have three 8 pole K3 CW filters for sale:
KFL3A-250
KFL3A-400
KFL3A-1.0K
$105 each shipped in CONUS, payment by money order, Cashier's check or
I kept planning to build an adaptor to fix it, but didn’t get around to it.
Then I drew it out to make sure I know what was going on and it hit me. Very
much a case of “laziness is the mother of non-reinvention”.
The PTT jack was an unexpected bonus.
wunder
K6WRU
CM87wj
Brian,
I don't know which DE-9 to 3.5mm cable that you currently have, but it
is easy to check with an ohmmeter.
Does DE9 pin 5 connect to the shell of the 3.5mm? That is Signal Ground.
Next check DE-9 pin 2 - that should connect to the tip of the 3.5mm plug.
Then DE-9 pin 3 should connect to
Sent you an email sir.
On August 17, 2015 7:10:30 PM EDT, Joe Word n9vx@gmail.com wrote:
The KFL3A-400 is still available. The 250 and 1.0K are sold.
Joe N9VX
On Mon, Aug 17, 2015 at 12:39 PM, Joe Word n9vx@gmail.com wrote:
I have three 8 pole K3 CW filters for sale:
KFL3A-250
Now I know what to ask the XYL for Christmas ;)
On August 17, 2015 7:33:34 PM EDT, Fred Jensen k6...@foothill.net wrote:
The K2 case Rose custom made for me [with space for batteries, paddle,
log, audio amp, and headphones for field operation] is perfect, just
what I wanted, and as Howie says,
The K3 I advertised for sale yesterday has been sold.
73, Joe W2KJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
For sale xv 144 with oven 300.00. Doug doug49...@gmail.com
More original than sent from iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
The TX Calibration issue I had with my K3 is now resolved. I followed Wayne's
suggestions and the final one revealed that without the KRX3A the 50W
Calibration ran fine. On replacing the subRX module and retesting all is OK.
Though I had carefully checked all TMP connectors and the seating of
Fair enough sir, ty :)
-Original Message-
From: Don Wilhelm [mailto:w3...@embarqmail.com]
Sent: Monday, August 17, 2015 1:57 PM
To: Jerry Moore; 'Joe Word'; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 CW Filters For Sale
Jer,
I understand that this is not directly in response
Jer,
I understand that this is not directly in response to your
question/statement, but reflects the other side of the fence
I have been dealing with Elecraft hams since 2003. When I do
independent work, I normally ask that a check be send for payment.
I have done more than 700 independent
With all of the fraud and theft that's common in our hobby these days. Does
anyone actually do cash/check/mo anymore? Just asking because I'm often
tempted by deals I see but based on my background (IT engineer specializing
in messaging/information security) I know the risks involved.
Not meaning
My preference is PayPal. In cases of fraud or ...not as described... ,
They are very helpful in refunding your money.
Most fraudsters know PayPal will hound them, so they decline PayPal.
Worse yet are those that decline USPS Money Orders (Mail Fraud) and
Demand payment via Western Union.
Run,
I have three 8 pole K3 CW filters for sale:
KFL3A-250
KFL3A-400
KFL3A-1.0K
$105 each shipped in CONUS, payment by money order, Cashier's check or
cash. No Paypal. Contact me at n9vx dot joe at gmail dot com
Thanks and 73,
Joe N9VX
__
Hi all,
after some discussion on Yahoo group list I was asked by some hams for more
details about the ESD mats and ESD tools for safe Elecraft kits assembling.
I do not understand all of the huge discussion on some forums and threats
about something which cost $25-$30 (compare to invoice for K3S
On Mon, Aug 17, 2015 at 2:03 PM, Ken G Kopp kengk...@gmail.com wrote:
She uses both as displays on her convention display table
===
ROFLMAO!
Tony KT0NY
__
Elecraft mailing list
Home:
I'm not finding my ESD setup. Do you ship to the US?
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of ok1rp
Sent: Monday, August 17, 2015 11:48 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Elecraft kits assembly using ESD protected bench
Hi
On Mon,8/17/2015 10:56 AM, Don Wilhelm wrote:
I don't know if I would extend that same trust to those advertizing on
eHam or Ebay, but from my experience, most hams are quite honest.
Yes. The key here is, I think, a matter of community -- it can be a
small world, and in matters of honesty,
I pretty much agree with Don on the honesty of Hams.
I always prefer PayPal as a method of payment, either
direction and my rating is 100% for almost 300 transactions.
That being said ... most of you know that Rose (N7HKW)
of Elecraft Cases and Covers is my Lady. She's sewn
several thousand
Sorry about that, I get a bit over excited.
It's odd that I've been in IT since the late 1980s, grew up with the
internet (used to be dialup to the college then use *nix search tools to
find content) and this is the first time with Reflectors. I'm on at least 3
now..
I'll cut the chattering :)
Sorry about that, I get a bit over excited.
It's odd that I've been in IT since the late 1980s, grew up with the
internet (used to be dialup to the college then use *nix search tools to
find content) and this is the first time with Reflectors. I'm on at least 3
now..
I'll cut the chattering :)
Thanks everyone. I just ordered the Manual from the ke7x.com site.
Cheers.
Ian VK3vin
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Nevermind, it looks like the limitation is the DSP being used on both TX and
RX.. correct me if I'm mistaken, not a bit deal. Dx is really my interest.
Jer
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
ae...@carolinaheli.com
Sent: Monday, August
This is a kit in kit form Asking 300 with shipping. Doug
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
To prospective Rose's Cases purchasers:
I have purchased several of Rose's products and let me tell you: they
are tough as nails! My KX3 bag has traveled thousands of miles and
hikes and is no worse for the wear. She communicates quickly if there
are any questions, and her products are
Just wondering if this was ever implemented? I'm not worries as this won't
be my primary mode or even a close second. I was just thinking about sat
work and maybe with the sub receiver, a few xverters, and separate
antenna/feedline it might be possible. Based on searches I see past
discussion but
It works as it should on 12 and 6 meters but on 10 meters pressing PRE shows
Pre1 then OFF then Pre1 them OFF. Anyone else have this happen?
FW is 5.33 - d1 is 2.86 - d2 is 2.86 - Fl is1.23 and dr is 1.03.
Sent from my iPhone
...nr4c. bill
KXV3A Interface Option $55 shipped U.S.P.S. Priority
Paypal or money order CONUS
73 Dwight NS9I
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I have three 8 pole K3 CW filters for sale:
KFLA-250
KFLA-400
KFLA-1.0K
$105 each shipped in CONUS, payment by money order, Cashier's check or
cash. No Paypal. Contact me at n9vx dot joe at gmail dot com
Thanks and 73,
Joe N9VX
__
36 matches
Mail list logo
