Re: [Elecraft] PTT KEY CONFIG setting volatile?

Danny, Do a test without WSJT running. Set PTT key config to DTR - OFF, then cycle power on the K3S. Does that setting survive the power cycle? If so, it is not a K3S problem, look to the WSJT software for the solution. If it does not survive the power cycle, contact K3Support. 73, Don

Re: [Elecraft] PTT KEY CONFIG setting volatile?

I have this on my K3S with the latest firmware. I use WSJT to key the K3S via the USB port and I operate in USB mode, not Data. Every time I power the K3S OFF I need to reset the PTT Key config to DTR – OFF. Danny, G3XVR From: Vic Rosenthal 4X6GP/K2VCO Sent: 23 May 2016 04:29 To:

Re: [Elecraft] To new KX2 owners

Wayne thanks for putting together this cool little rig and congrats on another successful release. I am heading to ZF2 next month and I am thinking this may be exactly what I need to go along for the ride.. :-). Low profile 10 watts, buddipole and tropical drink sounds very nice... Look

Re: [Elecraft] PTT KEY CONFIG setting volatile?

Which radio is it? I've never seen this on my K3. If you are running some kind of rig control software, try it with the software not running. 73, Vic, 4X6GP/K2VCO Rehovot, Israel http://www.qsl.net/k2vco/ On 23 May 2016 05:51, Ken Arck wrote: Sounds like a call to Elecraft tomorrow because

Re: [Elecraft] PTT KEY CONFIG setting volatile?

Sounds like a call to Elecraft tomorrow because this is repeatable! At 07:42 PM 5/22/2016, Cady, Fred wrote: That doesn't sound right. I don't think mine has ever changed. Cheers, Fred KE7X From: Elecraft on behalf

Re: [Elecraft] PTT KEY CONFIG setting volatile?

That doesn't sound right. I don't think mine has ever changed. Cheers, Fred KE7X From: Elecraft on behalf of Ken Arck Sent: Sunday, May 22, 2016 4:23 PM To: elecraft@mailman.qth.net Subject:

Re: [Elecraft] K3 Equalizer comment

Yes, I have a narrow span like that programmed into one of the P3 buttons for quick selection. His audio was centered around 500-600 Hz. Several guys with pan adapters ultimately tried to help him. I signed off and let them work with him. I heard him the next day and his audio was better

Re: [Elecraft] K3 and KX3 questions for Wayne

>>> I don't mind having a KXPA100 delivering 100W under 12V power supply. <<< Simple fix!    Apply ohms Law. (((73))) Milverton / W9MM. From: Johnny Siu via Elecraft To: Kevin Stover ; "elecraft@mailman.qth.net"

Re: [Elecraft] K3 and KX3 questions for Wayne

While I appreciate the motivation behind your request, you should have asked Wayne directly, and not via an email list sent to hundreds (thousands?) of users. If you did not want community replies, you should not have sent an email to a community mailing list. On Sun, May 22, 2016 at 1:46 PM,

[Elecraft] K3 and KX3 questions for Wayne

Hello Gentleman, I met both Wayne and Eric in the past, they are thick skin and like questions right in front of their faces.  Some questions for them to address will give them more desire to do better.  In return, we are benefited. Actually, I don't mind having a KXPA100 delivering 100W under

Re: [Elecraft] [RESOLVED] Audio via USB for the K3S?

On Sun, May 22, 2016 at 7:26 PM, Bob Darlington wrote: > You definitely do NOT need to be in data mode. I've never switched to > data... > Correct. You can transmit and receive data just fine in SSB mode. It's good that you fixed your problem, but that wasn't

Re: [Elecraft] [RESOLVED] Audio via USB for the K3S?

You definitely do NOT need to be in data mode. I've never switched to data and do PSK31 every day on a K3S. "LINE" level set high enough (mine is around 10-13) "MIC SEL" set to LINE IN. You'll also need to make sure the USB Codec sound input/output levels are set on your computer to levels that

Re: [Elecraft] K3 and KX3 questions for Wayne

Further down in the same online spec page it states "Compact unit ideal for both desktop and mobile use". Note *mobile* use where the electrical system supplies more than 13.8V with the engine running. I find no mention of the KXPA100 being developed as a "portable" amp. I have done searches of

Re: [Elecraft] Elecraft Digest, Vol 145, Issue 27

The new KX2 looks really exciting. Can anyone come up with a picture of the insides?  Doug K6JEY __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] K3 and KX3 questions for Wayne

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list:

[Elecraft] FS: N8BX VFO knobs NIB

FS: NIB N8BX VFO A/B knobs black power coated with aluminum inserts for K3/K3S. Sold my K3/100. Plans changed, no longer needed. Contact Bob, K3SRO at dlrwi...@verizon.net ASKING: $150 with S/H __ Elecraft mailing list Home:

[Elecraft] KX2

Just home from Dayton and getting ready to get my KX2 on the air I purchased at Dayton. Looking forward to the comments when everyone gets theirs on the the air. Thanks Wayne, Eric and the Elecraft team for the new product and your support. Looking at several locations now to activate SOTA in

[Elecraft] PTT KEY CONFIG setting volatile?

I notice the PTT KEY selection under CONFIG doesn't appear to be non-volatile as when the radio is power cycled, it always reverts to OFF - OFF. I'd like it to stay set to DTR -- RTS but it doesn't Even if I leave 13.8 to the radio, turning it OFF and back ON and that setting reverts.

Re: [Elecraft] K3 and KX3 questions for Wayne

On Sun,5/22/2016 11:46 AM, N6MQL wrote: Although I appreciate all of your answers I specifically asked these questions of Wayne because I was making a point to let him know of my disapproval of the fact that the KXPA100 amp is incapable of running a full 100 watts on a standard 12v battery.

Re: [Elecraft] K3 and KX3 questions for Wayne

You do know what's going on this weekend right? I'm sure once he is back from Dayton he will give your questions all of they attention they deserve. What sort of watt meter are we measuring the output with? On 5/22/2016 1:46 PM, N6MQL wrote: Although I appreciate all of your answers I

Re: [Elecraft] K3 and KX3 questions for Wayne

Actually it is a good measurement when the KXPA100 and KX3 are set up 'normally' with power to the KX3 supplied via the KXPA100. What the KX3 will display is the voltage present at the input to the KXPA100 (because that's where the KX3 is getting its power) less any voltage drop in the cable from

Re: [Elecraft] K3 Equalizer comment

One of the first things I noticed after getting the P3 and poking around the phone bands was how frequently a station's audio was concentrated right next to the suppressed carrier. K9YC helped me set my TX EQ, and the goal was to cut the lows [next to the carrier frequency] which consume a

Re: [Elecraft] K3 and KX3 questions for Wayne

Although I appreciate all of your answers I specifically asked these questions of Wayne because I was making a point to let him know of my disapproval of the fact that the KXPA100 amp is incapable of running a full 100 watts on a standard 12v battery. Furthermore I was trying to get an

[Elecraft] Elecraft CW Net Announcement

After a cold, wet week at least the propagation has marginally improved. A new Elecraft rig was announced on Wednesday. It looks like a good fit for those of us who work a little radio into our hiking, canoeing, or XC skiing sojourns. I was reading history (which I am wont to do) and found

[Elecraft] sub files

I keep getting the error message from Spot Collector that the file BandModes.txt does not exist how do I correct this problem. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] Tuneup, Rescue, build your K2, K1, KX1, others

Hello, Have you always wanted an Elecraft? A KX1, K1, K2, K3, whatever? Does your K2 need a tuneup? I build and service them all! See what my clients have said about my construction and service work at http://www.eham.net/reviews/detail/6768 Photos

Re: [Elecraft] K3 and KX3 questions for Wayne

According to the manual, you can use the KXPA Utility to read the voltmeter inside the KXPA100. wunder K6WRU Walter Underwood CM87wj http://observer.wunderwood.org/ (my blog) > On May 22, 2016, at 10:52 AM, Ken G Kopp wrote: > > Bill, > > The front panel voltage display

Re: [Elecraft] K3 and KX3 questions for Wayne

Bill, The front panel voltage display on a KX3 will -not- be accurate for the voltage at the input- power connector of the KXPA100. This voltage must be measured AT THE CONNECTOR on the rear of the KXPA100 to know what's being delivered to the PA. 73! K0PP On Sun, May 22, 2016 at 9:40 AM, Nr4c

Re: [Elecraft] K3 and KX3 questions for Wayne

*/My experience with my KXPA-100 that the power output would not ever get to the advertised 100 watts on 40 meters using the supplied power cable that came with my kit was worse. Even after setting the 45 amp power supply to the highest out put it would do, the radio reported 13.8 volts on

[Elecraft] [KX2] To new KX2 owners

I'm glad you left some back in Aptos so that us stay-at-homes had stock from which to order :-) John AE5X http://ae5x.blogspot.com/ _ >If you were among those who scooped up (in record time) the KX2s we brought to >Dayton: thanks for your

Re: [Elecraft] K3 and KX3 questions for Wayne

I noticed that my KXPA100 output was a little low so I checked the output of my 30A supply. It was a little low. I adjusted it up from 13.6V to 14.0 and all is well. -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-and-KX3-questions-for-Wayne-tp7617739p7617749.html

Re: [Elecraft] K3 and KX3 questions for Wayne

Or just use the Voltage reading displayed on the K3/KX3 front panel. It's quite accurate. Sent from my iPhone ...nr4c. bill > On May 22, 2016, at 10:52 AM, David Orman wrote: > > Another question - how long/what gauge is the wire running to your KXPA100? > I wouldn't

Re: [Elecraft] K3 and KX3 questions for Wayne

Another question - how long/what gauge is the wire running to your KXPA100? I wouldn't expect enough drop to pull your voltage down to a point at which it cuts back power, but you never know. Check your KX3 for the source voltage when transmitting, that'll tell you if you're dropping below the

[Elecraft] SP-3 Speakers SOLD

They're gone. Thanks to the multitude who replied! N4LQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by:

[Elecraft] For sale P3-SVGA-Monitor

Selling my Elecraft P3 High performance Panadaptor with P3SVGA Video Adapter and P3TXMON TX Monitor Power and Waveform Display Adapter with DCHF-2000 1.8-54 MHz, 1- 2000W HF 2000W Max directional coupler. $950 includes shipping to CONUS. Non Smoker. Paypal or USPS money order. George KE6TE Call

[Elecraft] Elecraft Weekly SSB Net

Please consider joining us for the weekly Sunday Elecraft SSB net on 20m. Time: 18:00z (UTC) 11am Pacific; 2pm Eastern Frequency: 14.303.5 We would love to have the first KX2 checkin from wherever you are (Dayton even!) Current net control, Eric WB9JNZ sent the following list of check-ins

Re: [Elecraft] K2 PA Failures and Remote Antenna Switch

Hi Ted, I see that you're right about no big caps on two of the relays. I was looking at the current version schematic, but there's an older one posted on W8JI's site with a completely different arrangement which must be what you had. That older circuit design is less than clever (IMHO).