I have this on my K3S with the latest firmware. I use WSJT to key the K3S via the USB port and I operate in USB mode, not Data. Every time I power the K3S OFF I need to reset the PTT Key config to DTR – OFF.
Danny, G3XVR From: Vic Rosenthal 4X6GP/K2VCO Sent: 23 May 2016 04:29 To: [email protected] Subject: Re: [Elecraft] PTT KEY CONFIG setting volatile? Which radio is it? I've never seen this on my K3. If you are running some kind of rig control software, try it with the software not running. 73, Vic, 4X6GP/K2VCO Rehovot, Israel http://www.qsl.net/k2vco/ On 23 May 2016 05:51, Ken Arck wrote: > Sounds like a call to Elecraft tomorrow because this is repeatable! > > > > > At 07:42 PM 5/22/2016, Cady, Fred wrote: >> That doesn't sound right. I don't think mine has ever changed. >> Cheers, >> Fred KE7X >> >> ________________________________________ >> From: Elecraft <[email protected]> on behalf of Ken >> Arck <[email protected]> >> Sent: Sunday, May 22, 2016 4:23 PM >> To: [email protected] >> Subject: [Elecraft] PTT KEY CONFIG setting volatile? >> >> I notice the PTT KEY selection under CONFIG doesn't appear to be >> non-volatile as when the radio is power cycled, it always reverts to >> OFF - OFF. I'd like it to stay set to DTR -- RTS but it doesn't >> >> Even if I leave 13.8 to the radio, turning it OFF and back ON and >> that setting reverts. >> >> Ken ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
