I like to narrow the span on my P3 to a few kHz when trying to break a
split pileup. But I notice that the response of the VFO B marker to the
VFO B tuning seems relatively sluggish in this case. It especially seems
that way when viewed on the large display provided by the VGA card. This
makes
On 12/6/2016 3:36 PM, George Kidder wrote:
Lynn: Since the computer is not connected to the network, there
should be little potential for evil except that which I generate
myself! The major evil is the power that it draws!
The major evil would be power spikes. I've not lost a computer that
Equipped with KPA3 100 Watt amplifier and KAT3 internal tuner. Bristol
condition; issue-free; smoke-free; never mobile. Updated by Elecraft on 17
Oct 16 to include Gold pins and certified to meet or exceed factory
specifications. $1750, includes shipping to lower 48. It was my pride and
joy but I
Lynn: Since the computer is not connected to the network, there should
be little potential for evil except that which I generate myself! The
major evil is the power that it draws!
Tom and Guy: It certainly begins to sound as if the drivers are at
fault. I formerly ran the program on my
Late model Elecraft K2/10 SN: 7200
Manuals
Near perfect condition
Everything works excellently with full output and great audio.
Only minor issue:
Headphone jack sometimes needs to be rotated a small amount once to work.
No microphone included
*Installed Options*
KSB2 SSB board
KAT2
Could be. Heil Sound made a ton of money from using very inexpensive
elements they found off shore and tied it to a name. I am very leery of
bogus reviews and any reviews anymore as so many companies are giving
you their stuff so you give them good reviews.
On 12/6/2016 3:48 PM, Walter
“MoovMic” sounds like a bad copy of “ModMic”, who invented this idea. The real
one has 63% five-star ratings. Two models, one is $40, the other is $55.
https://www.amazon.com/Antlion-Audio-ModMic-Attachable-Microphone/dp/B00T6XUL8S
That's a good warning, Ed.
Even at DSL data rates, you are dealing with data signals in the radio
frequency range.
My rule for unshielded cables is "short and sweet is neat".
73, Ron AC7AC
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
Has anyone tried this mic for headphones?
https://www.amazon.com/Headset-Buddy-Detachable-Microphone-Headphone/dp/B00DLKX7BK/ref=sr_1_3?s=electronics=UTF8=1481063490=1-3=boom+mic+for+headphones
$21.95
Reviews are not great.
On 12/5/2016 2:51 PM, Walter Underwood wrote:
ModMic makes boom
Hi George,
I have to agree with Tom on this one, either suspect drivers, or some as
yet undiscovered conflict running on your PC. The slowdown you describe is
a dead giveaway. That the dying program sends some garbage to the K3 as it
expires is irrelevant.
Whatever the program/driver is the
Same here.
Brian Denley
KB1VBF
Sent from my iPad
> On Dec 6, 2016, at 9:15 AM, Russ Tobolic wrote:
>
> The Koss SB45 has been working great for me and cheaper than the CM500. You
> can get them on Amazon for less than $30. Russ, N3CO
>
> From: Bill Gaines
It seems you turned text decode to TX only. This will decode what you send with
paddles (not hand key) but will not decode received stations.
Sent from my iPhone
...nr4c. bill
> On Dec 6, 2016, at 3:45 PM, Aaron K5ATG wrote:
>
> I am in the process of learning CW and
Thanks to all for the good-spirited sharing of your "mic for K3" tips.
Very, very helpful.
And I see that it prompted a few other queries on the topic.
73! KE1CY
On Sun, Dec 4, 2016 at 11:06 PM, Ron D'Eau Claire wrote:
> Fun is whatever is fun for you. If a nice looking new
Aaron,
To decode CW, you need to be in CW mode, not DATA.
You need to set the TEXT entry to TX only. See the Text Decode and
Display in the manual.
73,
Don W3FPR
On 12/6/2016 3:45 PM, Aaron K5ATG wrote:
I am in the process of learning CW and I am having a little bit of issue
with my KX3 on
I am in the process of learning CW and I am having a little bit of issue
with my KX3 on decoding CW. I am wanting it to be able to decode CW on TX
only so I can work on sending. By pressing the DATA button I selected TX
ONLY and I have the power setting at 0.0 watts into a dummy load. I am
using
Honestly, I don't believe this is an issue with LPBridge but rather Eltima
drivers. I can run the Eltima serial port monitor and even without traffic
it will always crash after a number of hours.
Always.
There is not much that can be done other than rebooting after some time or
closing it all
Computers that are turned off are safe from all kinds of potential
evil. That would be my recommendation.
On 12/6/2016 10:37 AM, George Kidder wrote:
So again I am at the end of my short rope! Maybe I should shut down
the system EVERY night. That seems to cure it.
Larry and all,
I have now tried adjusting the buffer settings. Originally, they were
set full "right" (High, 14 for receive, High 16 for transmit) I moved
the sliders to about 3/4 of full scale - still got a LPB crash in about
7 hours, while running NaP3 and FLDigi through LPB. I next
The Koss SB45 has been working great for me and cheaper than the CM500. You
can get them on Amazon for less than $30. Russ, N3CO
From: Bill Gaines
To: elecraft@mailman.qth.net
Sent: Monday, December 5, 2016 4:46 PM
Subject: [Elecraft] Headset/Mic Suggestions
Since
Ed,
RIT will not help either, the pitch will still be at the peak of the
passband.
Now if you are only wanting to move it several tens of Hz, it will not
make much difference - in other words, a properly aligned 700Hz passband
centered at 580Hz will extend from 230Hz to 930Hz, but a 400Hz
Ed, That kind of pain was part of the K2 fun for me (LOL)
73
Arie PA3A
Op 6-12-2016 om 10:31 schreef Eddy Avila:
Thanks everyone for your sage advice.changing CW pitch sounds like a
pain to me!!
ed ~ k6sdw
__
Elecraft
I use the CM500 mike with my K3s. Mike gain runs about 3 or 4 and still is
high. it there a way to decrease the mike gain? Oh, menu mic setting is “low”.
Ray
W8LYJ
__
Elecraft mailing list
Home:
Thanks everyone for your sage advice.changing CW pitch sounds like a pain
to me!!
I think I'll use the RIT and see if it's worth all that trouble.
73's all
ed ~ k6sdw
From: Don Wilhelm
Sent: Monday, December 5, 2016 4:51 PM
To:
23 matches
Mail list logo