I any case I do have a spare Rework Eliminator set if you want it.
Brian Denley
KB1VBF
Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Jeez Guys and Gals. Agree or disagree it is what it is.
One guy posts a for sale of some coax.
Three people post complaining about the price
TEN people complain or discuss the what and wherefore as to whether the post
SHOULD or SHOULD NOT be posted to the
Elecraft reflector.
And here I am
Fine, but do not address that to me. I am NOT the list moderator. That is up
to Eric.
Ron
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
Raymond Benny
Sent: Friday, January 27, 2017 6:51 PM
To: Ron D'Eau Claire
Cc: Elecraft Reflector
Subject:
On most lists, including this one, the list moderator is the final
authority. If he says it's okay, it's okay.
We can argue that it should be more restrictive, but ultimately, it's up
to Eric.
73 -- Lynn
On 1/27/2017 6:50 PM, Raymond Benny wrote:
I do not agree.
Elecraft reflector should
This is the guy who chewed me out. I don’t disagree, on the other hand I did
not propagate lots of traffic. He is not a friendly. Good luck. I have not
and will not respond to him. I don’t wish to fill the reflector with debate.
My listing was simple for one in need of the cable. I have
Ron,
I do not agree.
Elecraft reflector should be about Elecraft products. Just like my Toyota
Tundra reflector, only Tundra products and happenings are discussed.
If the moderator allows anything, I maybe asking for receipts for chocolate
cookies to eat so that I can have a snack while
I believe the IMA is still available from unPCBs.com. That is not part
of the Rework Eliminators, but a separate product.
If you want to try several different microphones with the K2, it is an
easy way to do that. If you have only one microphone that you want to
use with the K2, it is not
I have one KXAT1 kit still in the original plastic envelope that is excess
to my needs. Please contact me if you can use it: 701-880-8841, or
email rl...@yahoo.com.73 - Bob, K6KL
__
Elecraft mailing list
Home:
During a very successful 160m run, K3 stuck in transmit, the SS amp switched
off and then K3 turned off. After turning on, the right channel is gone.
With SUB on, both signals are in the left ear. Any possibility it is not a
hardware fault?
Ignacy, NO9E
--
View this message in context:
Bill,
Are all your antenna connections tight? - finger-tight is frequently
not enough for SO-239/PL259 connections, use pliers to tighten them a
bit more than finger-tight (after making sure the PL-259s are seated in
the "notches").
I would suggest doing the TX CAL procedure once again.
If
The only Re-Work eliminator I found helpful was the Mic connector. This
made changing a mic easier, but you had to remove the side panel. I concur
with Don's points on the rest. Only good if you wanted to remove add-ons or
prep for future. If you build the radio with all the intended parts,
Harry and all,
I included the electrical information in the post below, but I failed to
mention the standoffs. If you want to include the full "homebrew Rework
Eliminators", you will have to add the standoffs for each option. Refer
to the Elecraft manuals for each option and order the
Thank you
From: Don Wilhelm
To: Harry Yingst ; Elecraft Reflector
Sent: Friday, January 27, 2017 8:12 PM
Subject: Re: [Elecraft] Building a K2, Does anyime have a set of rework e
Harry,
If you are ordering
Harry,
If you are ordering the options you want to include with the K2, there
is little need for the Rework Eliminators. There is very little rework
when adding options - the "Rework" consists mainly of removing the
jumpers that are normally installed when building up the basic CW K2 and
You can be sure if a post does not belong here Eric, the list moderator,
will say so.
In his previous posts, Eric has stressed that *anything* of interest in
setting up and operating a Ham station or in promoting Amateur Radio is okay
provided the posters use discretion in the number of posts on
Ray, Thank you. I mistakenly posted on the reflector in response to
another thread then realized it was off topic, corrected it without
thinking. I will post this as it is not conforming with list rules and I do
apologize. MEA COPA as my wife with prompt me.
73,
Bill
K9YEQ
-Original
Check to be sure there are no port blocking filters on the routers. Be sure
the FW on the routers is up to date. The "same" routers can be different
based on production and FW versions. Good luck.
73,
Bill
K9YEQ
-Original Message-
From: Elecraft
I decided to build another K2 (since I foolishly sold my first one) I figured
this time around I would use some Rework Eliminators.
When I checked unpcb.com I found that they no longer stock them.
Does anyone have an unused set with the additional components (full kit) that
they want to sell?
Yes, it's true! The Midland (TX) Amateur Radio Club is raffling off an
Elecraft K3S plus MH-2 mic. For only $20 you can have a chance to win!
A maximum of 300 tickets will be sold.
The drawing will be held on March 18, 2017, at the annual St. Patrick's
Day Hamfest in Midland, TX.
For
I bought an Ecoxgear Pebble, lasts hours on a charge.
https://www.amazon.com/ECOXGEAR-Ecopebble-Waterproof-Wireless-Bluetooth/dp/B00LQ5M1QO?th=1
Thanks and 73,
Erik Tkal - W1QED
On Jan 25, 2017, at 10:59 AM, Ron Reis wrote:
Can anyone recommend a good, small,
Bill,
I will be buying a 250 - 300 ft spool of 1/2" hardline from a local
salvage/surplus store for $100. Guess you would consider it NOS. The wooden
spools themselves are in poor shape. Not certain that it is Andrews coax,
if not, its a very good copy.
Like John says, you buy it when you find a
I had a similar [but not exactly the same] problem when first
configuring for the W7RN remote. Brandon's analysis was that the RS-232
cable between K3 and RRC was intermittent. Turned out he was right, I
finally did the deoxit thing and worked with them, and when finally
seated tightly,
https://youtu.be/5ZSByNcaDd4
Here is a short video of what I'm seeing on the PX3
Thanks
K4YND
--
View this message in context:
http://elecraft.365791.n2.nabble.com/PX3-can-see-my-transmitted-signal-tp7626149.html
Sent from the Elecraft mailing list archive at Nabble.com.
Recently I had to replace the router at my remote site. The replacement
router is the same model as its predecessor (Cisco EA4500). I had good, but
possibly imperfect, records of the port forwarding setup which I reproduced
on the replacement router. Now, pressing POWER on the Control K3 turns the
Once I had an item for sale (on a real swap site) and someone pointed out
that my pricing was incorrect and too high. After some research I realize
that he was correct I was grateful for the information. Since then I have
notified a few people selling items when their pricing is way out of line
I will do my darnedest to stick around 'till have the sun's life has been
reached ... or at least to go fishing with Leroy.
73, Mike WA5POK
On Thursday, January 26, 2017 8:27 PM, lmarion wrote:
When stars reach middle age, half of ~10 billion for our sun,they phase
On 26/01/17 22:48, Bill Johnson wrote:
> I have 90' of Andrew Heliax with connectors, never mounted, brand new in
> boxes. I am selling as I do not plan on using.
Why are you posting this on the Elecraft list? It's nothing at all to do
with Elecraft. How are people supposed to filter their
27 matches
Mail list logo