Re: [Elecraft] Digital Mode Drive Setting Issues on K3S

2020-08-20 Thread Nr4c
Reduce the level of the USB CODEK in Windows to about 30%. This will give you finer control with the Lin In control. Sent from my iPhone ...nr4c. bill > On Aug 20, 2020, at 9:27 PM, Macka Murrah via Elecraft > wrote: > > I am trying to get my K3S set up for Winlink using the Vara digital

Re: [Elecraft] Digital Mode Drive Setting Issues on K3S

2020-08-20 Thread John Simmons
Is your radio set to DATA-A? -- 73, -de John NI0K https://www.qrz.com/db/NI0K Macka Murrah via Elecraft wrote on 8/20/2020 8:25 PM: I am trying to get my K3S set up for Winlink using the Vara digital modem for proper ALC operation. When I set the drive using either the Windows sound card

[Elecraft] Digital Mode Drive Setting Issues on K3S

2020-08-20 Thread Macka Murrah via Elecraft
I am trying to get my K3S set up for Winlink using the Vara digital modem for proper ALC operation. When I set the drive using either the Windows sound card slider, the Vara modem slider, or the Mic drive, I get no bars as I turn the drive up from zero and suddenly I get 6 bars with the 6th

[Elecraft] OT: RF interference from grow lights.

2020-08-20 Thread ab2tc
Hello all, https://www.edn.com/how-cops-are-finding-grow-ops-with-am-radios/ The above is a link to an article in the EDN magazine (a technical journal primarily aimed at EEs). The article is more than five years old, but maybe it is only recently this type of interference has started to show up

Re: [Elecraft] CW Sidetone and Line Out?

2020-08-20 Thread Bob Wilson, N6TV
There's a special setting only documented in the K3 Firmware Release Notes as follows: * TX LINE OUT (MONITOR) LEVEL NOW ADJUSTABLE: In CONFIG:LIN OUT menu entry, tap '2' (REV switch) to set the "T=" level (TX monitor). Tap '2' again to return to

[Elecraft] KPA500 SOLD

2020-08-20 Thread jack satterfield
KPA500 is sold pending receipt funds Tnx, Jack W4GRJ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by:

Re: [Elecraft] Symbol T in KX3 display

2020-08-20 Thread Peter Eijlander (PA0PJE)
Joe, you can download owner's manual/errata/accessory/tips etc here: https://elecraft.com/pages/kx3-high-perofrmance-portable-transceiver-manuals Page 8 of the manual describes all the display items. 72/73, Peter On 2020-08-19 at 20:06 Wayne Burdick wrote: The 'T' indicates that text decode