Although not the definitive resource, I am unable for find a YouTube video of a
successful USB device P3 screen capture.
- 73 and good DX de Mike, K6MKF, NCDXC Secretary
> -Original Message-
> From: Mike Flowers
> Sent: Saturday, September 26, 2020 20:59
> To: 'Bill Frantz' ;
Seems to have been implemented in P3 firmware - see:
https://ftp.elecraft.com/P3/firmware/p3fwnotes.rtf
P3SVGA 01.16 / 02-26-2013 says:
"Added display of an onscreen message when a USB device (keyboard or MSD) is
attached and detached."
I wonder if this message is appearing when a flash drive
Good Evening,
I received over five inches of rain this week, the air is much
fresher. There is some solar activity: a sunspot, a G2 class storm, and
higher flux readings. It will be noisy but the signals may be
stronger. I expect QSB to be deep and rapid. The nets will be
USB hubs were also not supported. Since all Apple keyboards have
a builtin hub, to ease connection of a mouse, the lack of hub
support knocked them out too.
73 Bill AE6JV
On 9/26/20 at 9:52 PM, elecraft@mailman.qth.net (Barry Baines
via Elecraft) wrote:
However, the "P3 HIgh-Performance
All,
There is a selection (SVGA Ubmp) in the SVGA menus that will, according to the
P3 manual, save a bmp file to a memory stick. Ref pp 43, 33 in the P3 Owners
Manual Rev H1.
Ben W4SC
Sent from Mail for Windows 10
From: Barry Baines
Sent: Saturday, September 26, 2020 21:52
To: Don
Hi Don,
Yes, subsequently I saw the illustration with that port labeled ‘keyboard’.
I was looking at the P3 manual, and not the SVGA option manual.
The P3 Utility is the only way I’ve found that will do a screen capture - but
always willing to learn something new.
-- 73 de Mike Flowers,
Don:
> On Sep 26, 2020, at 9:06 PM, Don Wilhelm wrote:
>
> Mike,
>
> Connector #22 is a USB port for a keyboard, not a general USB port. It is
> clearly labeled "KEYBOARD".
You're absolutely correct to note the labeling and I’ve always presumed that is
the connector is only for a keyboard.
Mike,
Connector #22 is a USB port for a keyboard, not a general USB port. It
is clearly labeled "KEYBOARD".
73,
Don W3FPR
On 9/26/2020 7:21 PM, Mike Flowers wrote:
I have successfully captured a P3 screen image.
Elecraft P3 Utility > Capture Image Tab> Capture Image button - this captures
I have successfully captured a P3 screen image.
Elecraft P3 Utility > Capture Image Tab> Capture Image button - this captures
the image then displays 'Bitmap copied to Windows Clipboard' - then paste from
the Clipboard into Paint or other app and save in the image format of your
choice.
My P3
Pretty much my experience, except that I have had some cases in which
the transfer starts but then hangs up.
73,
Victor, 4X6GP
Rehovot, Israel
Formerly K2VCO
CWops no. 5
http://www.qsl.net/k2vco/
.
On 26/09/2020 22:24, w4sc wrote:
Hello Jack, Vic,
P3 / SVGA.
I have tried at least 10
Hello Jack, Vic,
P3 / SVGA.
I have tried at least 10 different USB memory sticks, sizes 64 MB (yes Mega,
probably a USB 1.x?), 128MB, 4GB, …. through 64GB, all USB 2.0. I have tried
formatting NTFS, FAT32, and ExFAT. On a couple of the sticks I get a “Cannot
Initialize Device” error. With
I believe he's talking about the P3 with SVGA option.
73,
Victor, 4X6GP
Rehovot, Israel
Formerly K2VCO
CWops no. 5
http://www.qsl.net/k2vco/
.
On 26/09/2020 19:33, Jack Brindle via Elecraft wrote:
What product is this for?
73, Jack, W6FB
On Sep 25, 2020, at 5:42 PM, w4sc wrote:
I’ve read
I finally managed to get it partially running with the help of a couple
people. One final question, shouldn't I have speaker audio from the K3/0
mini, or must I have an external speaker attached.
Steve KD2OM
On 9/25/20 10:32 PM, David Lee / Seatools wrote:
>
A really big thanks to all who responded with very helpful info. It was greatly
appreciated!! Take care all and stay sage, 73, Mike
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
What product is this for?
73,
Jack, W6FB
> On Sep 25, 2020, at 5:42 PM, w4sc wrote:
>
> I’ve read the manual, tried at least 10 memory sticks (a very BAD location
> for the USB, some don’t fit because of VGA cable.
>
> What is the secret?
>
> Ben W4SC
>
> Sent from Mail for Windows 10
>
>
Yes, I have one - BUT
Elecraft has the schematics for all the transverters. Go to the manuals
page and open the Retired Products page.
Then select the XV Transverter Owner's manual and download it.
You will find in Appendix A the schematics for the XV50, XV144 and XV222.
If you have a printed
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
On Thu, Sep 24, 2020 at 7:52 PM MIKE ZANE wrote:
> Need a little help. I just bought a KX3 and have it working OK. I also
> have a 45w amp that I would like to work with the kx3. However, with no
> info on the keying line coming from the amp, I have no idea if its Ok to
> use.
See
18 matches
Mail list logo
