Re: [Elecraft] KPA1500 DC Connector Failure

That's how it used to work, yes. Now it pushes all the way in but it just won't stay there. The clicks are gone. I'll have to look at both sides of the connector and compare with new ones. Dave AD6A > > On Dec 21, 2020 at 9:43 PM, mailto:ht...@twofifty.com)> >

Re: [Elecraft] KPA1500 DC Connector Failure

Two clicks? You push it in and there's two clicks. Every problem I've had (once) was I forgot the second click. On Mon, 21 Dec 2020, AD6A wrote: Hi Folks, I just had a wierd DC connector failure on my KPA1500. The 75A power pole connector that feeds the back of the amplifier section just

[Elecraft] KPA1500 DC Connector Failure

Hi Folks, I just had a wierd DC connector failure on my KPA1500. The 75A power pole connector that feeds the back of the amplifier section just falls out. It hasn't been hit/moved or anything for years. The failure seems to be due to the weight of the DC cable continually pulling down on the

[Elecraft] Dear Santa

All I want for Christmas is my K4. I know you are very very busy helping those family's in need, especially this year for sure. Last year you did not send me what I asked you for, and yes it was a K4. Something tells me I will be bypassed again. All I ask is get those little Keebler Elves busy,

Re: [Elecraft] K4 Status Update

Best wishes to you and the other employees. Enjoy a restful holiday. SNAFUs happen. 73 Bill AE6JV On 12/21/20 at 8:41 PM, e...@elecraft.com (Eric Swartz) wrote: > One last note - Elecraft will be closed for the holidays this Thursday and > Friday (12/24-25) and New Years Day on Friday (1/1),

Re: [Elecraft] K4 Status Update

Thanks Eric! > On Dec 21, 2020, at 8:43 PM, Eric Swartz wrote: > > K4 Status Update - from deep inside Elecraft > > First I apologize for the delay getting this update out. I've been head > down, along with the rest of our team and our suppliers, for a good part of > this month working to

[Elecraft] K4 Status Update

K4 Status Update - from deep inside Elecraft First I apologize for the delay getting this update out. I've been head down, along with the rest of our team and our suppliers, for a good part of this month working to solve problems and get K4s flowing out to you faster. We ran into delays in

[Elecraft] 2 KSYN3 boards for sale

Greetings all, Doing some end of the year clearing out of Elecraft boards. These KSYN3 ( the original synth} were replaced by the new syth boards when they first appear on the market in 2018. The KSYN3 boards are for sale for both at $210 or $108 each. I will pay for shipping, handling and

Re: [Elecraft] K4 CAT and audio over ethernet.

Sweet, Merry Christmas -Original Message- From: Wayne Burdick Sent: Monday, December 21, 2020 21:14 To: gregg.w6i...@gmail.com Cc: Elecraft Reflector Subject: Re: [Elecraft] K4 CAT and audio over ethernet. > On Dec 21, 2020, at 1:06 PM, wrote: > > Will the K4 CAT interface be

Re: [Elecraft] KX3util error on Linux Mint 19.3 64 bit.

Dave, https://launchpad.net/gtkhtml But just versions for Trusty and Precise. No updates after 2013 I have the same error on the help but never needed it. Also in the GUI btw in KX3UtilityLINUX_1_19_9_6 which runs fine in 64bit Linux. I found several "libwebkits" in Synaptic Installed are

Re: [Elecraft] K4 CAT and audio over ethernet.

> On Dec 21, 2020, at 1:06 PM, > wrote: > > Will the K4 CAT interface be available over ethernet. If so, will the K4 act > as a TCP server? Yes. > Will TX and RX audio be available over ethernet? Yes. 73, Wayne N6KR __

[Elecraft] K4 CAT and audio over ethernet.

Will the K4 CAT interface be available over ethernet. If so, will the K4 act as a TCP server? Will TX and RX audio be available over ethernet? Thanks Gregg W6IZT -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of kevinr Sent: Sunday, December 20, 2020 23:41 To:

[Elecraft] 40 meter SSB net 12-1-20

Thanks to all checking-in and helping with relays. Signals were strong and band noise low. K1NW BRIAN RIK3 K8NU CARL OH K3S NC0JW JIM CO KX3 NS7P PHIL OR K3 W9MNC MIKEFL K3S WB9JNZ ERICILK3 AE6JV

Re: [Elecraft] [K3S] KLPA3A vs LPA

Pat, I do not believe they are interchangeable. Contact supp...@elecraft.com and they can provide some test points to help analyze the problem. 73, Don W3FPR On 12/21/2020 11:36 AM, Ing. Pasquale Speranza wrote: I have a problem on my K3S. Suddenly in SSB the radio started producing

[Elecraft] [K3S] KLPA3A vs LPA

I have a problem on my K3S. Suddenly in SSB the radio started producing splatters. It is very evident when comparing with a K3. Trying with spectrum analyzer in CW the wave is perfect, the phase noise also ok. The problem persists excluding the KPA3A. The ALC control seems to be ok. It's likely a

[Elecraft] KX3util error on Linux Mint 19.3 64 bit.

Hi. Decided to update the KX3.  (Having also just updated the XG3Util software, and found that device was up-to-date.) Downloaded the current kx3util software (Linux x86 version) from the Elecraft site, and got that "installed" such as it is. Comm's established with the radio via genuine

[Elecraft] Wanted to buy: P3 TX monitor 2000watt

I'm looking for a P3txMon 2kw version Email my offline Thanks and 73 and Merry Christmas/Happy New Year... Happy Holidays! Dean K2WW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] Year vs serial number

TomMy K3s is serial number 11029. Factory built. I bought it in November of 2016.Hope that helps.73Mike KC8WHSent from my Verizon, Samsung Galaxy smartphone Original message From: cx...@4email.net Date: 12/21/20 1:23 AM (GMT-05:00) To: elecraft@mailman.qth.net Subject: