Operation of the the KXPA100 with its tuner works great with my KX3
using the KXUSB cable (particularly nice when KX3 is mounted on my truck
dash and amp is under the back seat.
But I also use the amp/tuner with my K3/10 (low power version) which has
no KXUSB jack. I just connect PTT to the
I doubt that ice on the antenna would have any effect in terms of
increased loss. However, I would expect the resonant frequency to
change and thus the need to adjust the tuner. If it is and ATU /
automated tuner, then perhaps a bit too low power may cause the SWR
bridge to read
Yuck! As a retired recording studio engineer, CBS Records, having the
same signal out of phase by 180 degrees to one ear, is much like
sticking and ice pick in ones ears.
Most systems will have a variable phase shift depending on frequency,
usually not to exceed 30 degrees. In this case,
Thanks to my relay stations.
WM6P STEVE GA K4D #436 NET CONTROL
W3SA JOHN NC TS-890
K8NU CARL OH FTDX101D
W9EJB ED IN K4D #498
WY3T TIM FL K3S
N4CY EVERETT AL K4D #265
N8SBE DAVE MI K3S
AE6JV BILL NH K3
K4BLK BRADON GA IC705 QRP
N2TNQ LEN NJ K3
W8PLT TOMMY WY FT991
NK9A STAN MI FT757DX
WB8HRO TIM
I have an Elecraft E850463 (15 pin, M/F) cable that is surplus to my
needs. $15.00 + postage if you need one.
73 & HNY!
Mike - W0AG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I doubt that pogonip or even solid ice on your antenna would have major
effects [well, except for weight]. Ice forming from water directly from
the sky is a pretty good insulator. We had a very large Log-Periodic on
the roof of the hangar at my first USAF assignment in the remote
northern
Hi Don,
Thanks for the recommendations and comments. Both the KXPA utility
and the KX3 utility communicate fine with my hardware setup. I'm
guessing the WIn4K3 Suite does not properly communicate with both
devices through one com port. I'll see if I can post on their groups.io
forum and
I didn't have a good night in the K1USN Slow Speed Test. I started
more-or-less on time and tried to answer CQs. None of the
stations I tried
could hear me. My SPE 1.3K amp said I was putting out about a kilowatt,
although the antenna tuning on my normally low SWR 40M dipole
needed to be
$20 Paypal.
Carl Yaffey K8NU
614 268 6353, Columbus OH
http://www.carl-yaffey.com
http://www.bluesswing.com
http://www.timbrewolvesband.com
http://www.folkramblers.carl-yaffey.com
Http://www.clintonvillegrass.com
__
Elecraft mailing
Matt,
You likely have a problem with U7. At least, that is the thing that you
need to resolve first.
Sorry about U6, it usually makes a loud pop when the base and collector
are shorted. You will have to replace it before you get any power out.
73,
Don W3FPR
On 12/25/2021 2:51 AM, Matt
John,
Only one KXUSB is needed. The other is just a TRS to TRS cable.
The KXUSB cable must connect first between the KXPA100 and the PC. The
second cable between the KXPA100 and the KX3.
If connected that way, everything should work.
See if both the KXPA100 Utility and the KX3 Utility will
Greetings,
Has anyone using Win4K3 Suite with a KX3 and KXPA100 been able to get
the KXPA100 to show up in the Controller menu ? Is another KXUSB cable
required? How is your system all connected? Is this even necessary or
even possible ? I have my KXPA100 and KX3 connected as diagrammed
The K3 does have several stereo functions, including something called
"binaural" and a few delay settings. But it does NOT have the capability
of spreading signals out by frequency like the KX3 can.
73,
Victor, 4X6GP
Rehovot, Israel
Formerly K2VCO
CWops no. 5
http://www.qsl.net/k2vco/
On
13 matches
Mail list logo
