That message means that for some reason or another. the K3 is detecting
a key closure on power up.
Check your key and the contact spacing first, and then proceed to
anything that may be causing that message.
Don't overlook a stuck PTT switch, which can cause the same message.
If all else
It means your radio is keyed. Unplug the key.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
Dave W8OV wrote on 4/12/2022 6:36 PM:
I had that once and it turned out to be a wire connected to my key
line was contacting some other device. I'd suggest you look for any
connection
I had that once and it turned out to be a wire connected to my key line
was contacting some other device. I'd suggest you look for any
connection between your key or cable and something else.
--Dave W8OV
On 4/12/2022 20:25, John D Freed wrote:
I was upgrading my elecraft k3 (ser# 7023) to
I was upgrading my elecraft k3 (ser# 7023) to the latest firmware. I now have
the following message: ERR KEY. anyone have a solution to fix this
situation?? I would like to know how to clear this error and get my rig up and
operating.
John KX6F
On 4/12/2022 4:27 AM, Andrew Moore wrote:
One could say the same about going to the UPS Store and simply paying
them for their service ;)
Except that they will do the HARM to the person receiving the shipment
of using packing peanuts, which are an abomination.
73, Jim K9YC
Mouser has 15 match pairs in stock today. Thats what you want anyway, not
single devices even though it may not matter. You are paying $6 for the
matching process. VRF2933MP
Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ
VP2EHZ
email: b...@wjschmidt.com
A fatal self-inflicted wound if awaiting or not expecting but receiving a UPS
shipment from someone, somewhere.
AG6CX
Sent from my iPhone
> On Apr 12, 2022, at 6:18 AM, KE8G wrote:
>
> Very easy go into your email settings and write a rule that if an email
> comes in containing "UPS"
Hi Ziv,
The SD2933 is an older part - Mouser lists it as 'obsolete'
and otherwise unavailable. A review of the datasheets
for the two devices (VRF2933, SD2933) reveals that the
VRF2933 has a higher drain-source breakdown voltage
than the SD2933, and it is tolerant of SWR values up
to 70:1. The
Hi Tim;
We have seen the KAT3 circuit board touch the threads on the AUX BNC and
short which burns some traces.
Check for that, you can put a washer on the mounting stud to lean it away.
Also there are some fine traces along the perimeter of the board that
are delicate and can easily get cut
This isn't the K4 reflector.
On Tue, Apr 12, 2022, 09:08 Jim Cox wrote:
> Please get back to K4 information on the reflector, I chose to join the K4
> reflector because it was linked to the radio, not everyones opinion o
> Fedex, UPS, etc.Jim K4JAF
>
>
>
> Sent from Mail
Very easy go into your email settings and write a rule that if an email
comes in containing "UPS" is it sent to the Trash basket.
73 de JIm - KE8G
On Tue, Apr 12, 2022 at 9:04 AM Julia Tuttle wrote:
> Y'all, nobody was calling for the thread to stop. They were literally
> asking for a
Y'all, nobody was calling for the thread to stop. They were literally
asking for a technical solution to not *personally* keep seeing it.
On Tue, Apr 12, 2022, 07:58 Bert Craig wrote:
> Amen!
>
> "I fail to understand the hardship of using the delete key."
>
> #MobCensorshipStinks
>
>
>
> Sent
Sold
On Fri, Apr 8, 2022 at 12:33 PM George Danner wrote:
> *K3-K High Performance 160 - 6M Transceiver W/Subreceiver:*
>
> K3/100 100 W Transceiver, KAT3 Internal ATU, KRX3-High Performance
> Subreceiver, KDVR3- Digital Voice Recorder, KXV3A-RX Ant., IF Out and
> Xverter Interface, Main
Amen!
"I fail to understand the hardship of using the delete key."
#MobCensorshipStinks
Sent from MailDroid
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Yep. I have accounts with USPS, UPS, and FedEx. The benefits are manifold.
It's very easy to compare shipping methods/rates, generate shipping labels, and
the rates are generally lower. Each have apps and websites were anything
you're shipping or receiving automatically shows up with the
>> I fail to understand the hardship of using the delete key.
> Same here
One could say the same about going to the UPS Store and simply paying them
for their service ;)
73,
Andrew NV1B
..
On Mon, Apr 11, 2022 at 10:40 PM Jim Brown
wrote:
> On 4/11/2022 5:30 PM, Wes wrote:
> > I fail to
The purpose of the transformer isn't to get anything close to a
conjugate match. Doing so would produce a very inefficient PA, and, I
suspect, would produce unacceptable levels of distortion
(non-linearities in the output impedance would be visible in the signal).
The purpose is reduce the
Hi
Got a malfunction KPA500 with suspect MosFet that are dead. Current
VRF2933 hot long lead time at Mouser and Digi-key, however I got several
SD2933 mosfet in hand. Any idea of the SD2933 can be used as replacement?
thanks
Ziv - 4Z4OQ
18 matches
Mail list logo
