Eric,
You will need a #1 Phillips screwdriver.
Remove the 2 black screws just to the rear of the front panel,
Then the 2 screws on the upper part of the rear panel.
There is one screw on each side panel near the top center.
Now you should be able to remove the KPA100 from the base K2. Place it
Dear K2 Wizards:
I bought a K2 from a friend's (WA6OCP, SK) estate, and had a 100w lid built
into it by Dave, W8FGU) who also gave it a full checkout and realignment. I've
now got well over 10 hours of TX time on it, and according to the manual the PA
screws need to be tightened.
My problem is
2 matches
Mail list logo
