Good Day!
I have a new, still sealed in the Elecraft shipping box KIO3BUPKT.
Purchased in July, 2023. I've decided to stick with my microHam interface.
$475.00 Shipped CONUS. Save yourself $60.00.
PayPal F OK
73, Ray - ND8L
__
Everyone, thank you for all the nice offers on my K2 & K3.
I sold both to one of you :-)
73, Rob
KT7L
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Thanks again Wayne. I saw your message on the other group list. Appreciate your
help.
Ryan W6ZAR
Sent from Yahoo Mail on Android
On Wed, Aug 30, 2023 at 12:34 PM, Wayne Burdick wrote:
Hi Ryan,
As I just posted to the KX group list, I'll be looking at your rig myself as
this may be a
Hi Ryan,
As I just posted to the KX group list, I'll be looking at your rig myself as
this may be a firmware issue.
73,
Wayne
N6KR
> On Aug 30, 2023, at 12:25 PM, R.S. via Elecraft
> wrote:
>
> Hello all,
> I ordered a KX2 with all the options back on March 27th of this year and
>
Sorry to hear about the issues. When you sent the radio back, did you sent
back the mic as well? I'm wondering if they tried to replicate it with the
same mike you're using. My best guess is it's a problem with the microphone
connector - either the plug or the socket - maybe the two aren't meshing
Hello all,
I ordered a KX2 with all the options back on March 27th of this year and
received it on July 12th. Out of the box it was having issues. For example,
-When pressing PTT button on factory mic it will change frequency
intermittently.
-MIC UP/DOWN buttons put KX2 into TX mode briefly
I lived in an apartment complex, and ran HF, VHF, and UHF. I had to be
stealthy about it, but I made it work. We were on the 3rd floor, with a
balcony facing a parking lot that had a copse of trees behind it. I could
attach a fishing sinker to the end of a piece of magnet wire and shoot it
into
As you point out condo does not automatically mean no ham radio. Here we have
13 units and I got condo board permission for a 30 foot tower and hex antenna
David K0LUM
> On Aug 30, 2023, at 12:48 PM, DAVID MOORMAN wrote:
>
> Rob, do they specifically forbid HF radio transmission? I live in
Rob, do they specifically forbid HF radio transmission? I live in a small (21
unit) condo building near Chicago, and the association is kind enough to let me
put a Hustler antenna with three resonators on our first floor balcony. It
works but OK not great. If you’re on a higher floor, you
I am moving into a Condo complex, and can’t do HF radio there…. Reluctantly, I
must Part with these, (along with a ton of other ham stuff)
K2: SN 0356, Int Batt, ATU, and Tilt Stand — No Mic.
Make an offer, as I have no idea of value
K3: SN 6154
K3/100
KAT3
KXV3A
KFL 3A-2.8_2,7
KFL3A-400
The T1 has been spoken for. Thanks.
Jim, W0EB
-- Original Message --
From "Jim Sheldon"
To "Elecraft Reflector"
Date 8/30/2023 10:41:39 AM
Subject T1 Antenna Tuner for sale
I have a T1 that's a couple years old. It got used only slightly and never out
portable with my KX2 after
Hello All /Elecraft /owners.
I have two extra cables that I'll likely never have a need for; open to
offers, off the list to: K1ND @ Comcast.Net
(A) 240V AC cable for the KPA-500 amplifier
(B) PCX4087 E850463 tagged cable ~ the DB9 end is labelled Yaesu
Regards, Jan K1ND
--
This email
I have a T1 that's a couple years old. It got used only slightly and
never out portable with my KX2 after I built it from the kit. I added
the internal tuner to the KX2 to minimize things to carry when we went
on vacation and the T1 was shelved as a backup in case the KX2's tuner
quit (it
After the switch. Here's a crude diagram:
|-> LDG Tuner -> OCFD
K3S --> KPA500 --> Switch -|-> SteppIR
|-> Dummy Load
Ken
-Original Message-
From:
Ah yes, that was it! Thank you all!
> Message: 1
> Date: Fri, 25 Aug 2023 14:38:51 -0400
> From: Erik Wheeler
> To: elecraft@mailman.qth.net
> Subject: [Elecraft] K3 subreceiver works on CW only
> Message-ID:
> <
> ca+e6vg7jhuyttyopmfkeys8swpnjmwtbqhw71gg9nxxb_qc...@mail.gmail.com>
>
15 matches
Mail list logo
