Hello Criag,
I am using the LP-Pan and k3 with mix for all modes.do you still need help
setting up? if so let me know and will work with you over the weekend.
Don...w2xb
Craig WØLV wrote:
I have all of the above. Is there any way I can use the LP-Pan and sound
card to run with MixW
the k3 starts to xmit, you will see 4 bars over the alc on the
screen. If there are more set it with the mic button to see 4 bars.
I hope I have it all. But if I don't we have the week-end to get it squared
away.
Donw2xb
From: Craig WØLV (via Nabble)
Date: 10/16/09
Good Morning,
Just wanted to let you know how great the W2 works. And keeps getting
better with the fixes. The download utility is super. One click to check
the new version and it downloads to the utility. Best one Yet!
Donw2xb
Brian Broggie-2 wrote:
Hi, Richard!
You
sel is Line in...
Hope this helps..
Don...w2xb
Gary Gregory-3 wrote:
Thanks for the replies and settings etc. All to no avail sadly. The K3
will
work on CW but stubbornly refuses to TX on DATA A either RTTY or PSK31.
This was a factory built unit and if I was located near Aptos it would
Hello Jeff,
I work the satellites all the time. Just send QRS and I'm sure the op will
slow down. Very seldom one won't. 98 percent of the cw ops will be glad to
slow down and work you.
Don...w2xb
Jeff Wandling W7BRS via K3List wrote:
Strange question, but I have the need to keep using
and I see
the small T below the data icon.Also have the key plug in the paddle
jack in the rear.
Any ideas?
Don..w2xb
P.S. no problem sending psk or data with the soundcard and MixW.
--
View this message in context:
http://n2.nabble.com/cw-to-psk-tp2104545p2104545.html
Sent from the Elecraft
Hello Group,
Just setting up HRD. All is working fine. Can HRD copy cw ?
Don...w2xb
--
View this message in context:
http://n2.nabble.com/HRD-cw-copy-tp2192917p2192917.html
Sent from the Elecraft mailing list archive at Nabble.com.
___
Elecraft
Great! What is the setup for copy cw. I must be overlooking it
Don...
R. Kevin Stover wrote:
Don,
HRD/DM780 can copy CW.
W2XB wrote:
Hello Group,
Just setting up HRD. All is working fine. Can HRD copy cw ?
Don...w2xb
Hello Ken,
If your using rigexpert with the mixw software you have to set the soundcard
to rigexpert first. then when you go to cat interface it will show the
rig expert.
I had it working great. I now use a Navigator interface. But the rigexpert
was all I needed..
Don...w2xb
Kenneth Waites
Hi Jim,
Just setup aclog with the K3. working great...
Have it set to port #1, Baud rate same as the rig(38.4), polling rate is 500
ms, on select rig I have elecraft and under that I have freq checked...
Don...w2xb
W3CP wrote:
I hope an ACLog user out there can give me a clue as to my
for this?
Don..w2xb
--
View this message in context: http://n2.nabble.com/AGC-tp2435434p2435434.html
Sent from the [K3] mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Thanks for the reply Keith,
Makes sense.
Don...w2xb
---Original Message---
From: Darwin, Keith (via Nabble)
Date: 03/06/09 07:56:25
To: W2XB
Subject: Re: AGC
Since AGC automatically turns down the gain when there is a big signal,
I'd expect that it would make
Boy, this software works great. Nice to see the right time.
Thanks, David(w4smt)
Don...w2xb
Doug Phillips wrote:
OK guys,
David, W4SMT, really has a hit here, the Windows compile works great
and sure takes the drudgery out of setting the clock in the K3.
Doug W7RDP
Hello Rob,
I have the same setup, all is working fine except, can't get n1mm to
transmit on digital. Can you give me your setting for the digital. Had it
working a while ago, but have a new PC and can't get digital to transmit.
Great setup...
Don...w2xb
Robert Beard wrote:
Hello Group
Hi Dave,
to get the SDR and the K3 to match, click on the WWV button and use this to
set the if frequency Global offset. That will put you right on the mark..Its
in the Softrock if stage tab...
Don...w2xb
N1IX-2 wrote:
I finally have things working more or less.
What I see on the SDR
Eric Manning wrote:
Has anyone confirmed that MixW supports the K3?
It should, as it supports the K2 and they both use the Kenwood commands.
However . . .
eric VA7DZ
Hello eric,
I have mixw working fine with the K3. Also have working fine with the Lp-Pan
and SDR-if.
Don...w2xb
Having a senior moment,
I can't transmit. Keep getting an error message.ERR TXF. I corrected this
when I first got the K3. But can't remember what I did.
Thanks
Don..w2xb
--
View this message in context:
http://n2.nabble.com/K3-ERR-TXF-MESSAGE-tp666938p666938.html
Sent from the Elecraft
Thanks to everyone that jarred my memory.
Got it working fine now. Had the tx filter set wrong.
Don...w2xb
--
View this message in context:
http://n2.nabble.com/tx-err-message-tp666966p666966.html
Sent from the Elecraft mailing list archive at Nabble.com
Hi Larry,
Had the same thing. Just right click on page and do a refresh and all should
work.
Don...w2xb
Larry P. Greenberg wrote:
A few days ago, I was able to download and install MCU 2.32, the firmware
beta version. Yesterday, MCU 2.34 became available correcting some code
of 2.32
Good morning,
Need a little help setting up the NR. When I use it cuts out the white
noise but the voice is muffled. Sounds like it is being over driven and
kinda fades in and out.Signal sounds better with it off. Tried all the
setting (F1 thru F4).
Don...w2xb
--
View this message in context
W2XB wrote:
Good morning,
Need a little help setting up the NR. When I use it cuts out the white
noise but the voice is muffled. Sounds like it is being over driven and
kinda fades in and out.Signal sounds better with it off. Tried all the
setting (F1 thru F4).
Don...w2xb
Problem
Hello folks,
I have the KRX3 installed and been playing around trying to get it at the
same gain level as the main RX.Can anyone share there settings.
Thanks
Don...w2xb
--
View this message in context:
http://n2.nabble.com/krx3-settings-tp1129382p1129382.html
Sent from the Elecraft mailing
recievers working great!
Don...w2xb
:jumping:
--
View this message in context:
http://n2.nabble.com/setting-up-the-KRX3-tp1130012p1130012.html
Sent from the Elecraft mailing list archive at Nabble.com.
___
Elecraft mailing list
Post to: Elecraft
Good morning all,
Have a super big problem with the K3 :-) Every time I move the K3 the power
plug falls out. Changed the connectors and still comes out with the
slightest movement of the rig.
Any suggestions on keeping it snug. Tried tweaking the contacts with no
luck.
Don...w2xb
Not really
. Changed the
pins and all is well.
Thanks a lot for all the time and help.
Don...w2xb
--
View this message in context:
http://n2.nabble.com/RE%3ABig-problem-tp1316444p1316444.html
Sent from the Elecraft mailing list archive at Nabble.com.
___
Elecraft
Hello Jack,
I am using serial to USB cables with the K3 and N1mm and also Winkey.
all working fb. Do you have the same baud rate set on the K3 as in n1mm?
If the utility software works with the serial to USb cable it should work.
Don...w2xb
Jack Colson wrote:
OK I give up, I have two USB
Hello Folks,
received a e-mail from Gary, and all is well now.
just entered 80 freq in both vfo-a and vfo-8. That did the trick...
Don...w2xb
W2XB wrote:
Hello Folks,
Have a small problem,
When I am on 80 mtrs (K3) and move the VFO-b dial, the band changes to AM.
Checked all the other
.
Don...w2xb
--
View this message in context:
http://n2.nabble.com/changing-band-tp1454423p1454423.html
Sent from the Elecraft mailing list archive at Nabble.com.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
I keep getting a loud Pop on cw every now and then. Its really deafing.
Any ideas on how to get rid of it?
Tried different setting with the AGC but no luck.
Don...w2xb
--
View this message in context:
http://n2.nabble.com/Loud-Pop-on-CW-tp1582886p1582886.html
Sent from the Elecraft mailing
Thanks John,
Will give it a try.
Don...w2xb
---Original Message---
From: John A. McCabe (via Nabble)
Date: 11/26/08 17:05:24
To: W2XB
Subject: Re: [Elecraft] Loud Pop on CW
I had a similar problem and setting AGC PLS to off in the menu seemed to
fix it for me
I got the same message when i was using wrong comport. I have the navigator
interface connected to the K3 and it shows two comports for PPT and Cat.
It was set on the wrong comport. Don't ask me how the heck it changed, but
it did. Switched comports and i was in bizzness.
Don...w2xb
--
View
Hello Group,
Har! getting old is not for sissies!! I was coping cw with my new (first
ever) hearing aids. When they are out, rx is normal. With the aids in, its
picking up the high pitch. Sorry about the wasted bandwith.
Thanks
Don...w2xb
--
View this message in context:
http://elecraft
Thanks Don,
will wait serveral weeks and then go in for a tune up..
boy its nice to hear again...
Don...w2xb
--
View this message in context:
http://elecraft.365791.n2.nabble.com/re-cw-recieving-tp5387149p5387306.html
Sent from the Elecraft mailing list archive at Nabble.com
Thanks Fred.
Don...w2xb
--
View this message in context:
http://elecraft.365791.n2.nabble.com/re-cw-recieving-tp5387149p5387380.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http
it. Thanks for a great additon to the K3
Elecraft..
Don...w2xb
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3-tp5527137p5527137.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing
Hello group,
Just playing around and getting used to all the settings on the P3.
Connected the LP-PAN setup to the extra if poet on the P3 and it works
perfectly. All funtions on the lp-pan and the P3 are right in sync. Very
nice additon (P3) to the K3 setup.
Don...w2xb
--
View this message
came s51wo (sam). Had a short qso and then
turned off the rig. I could just about make out the last letters of my call
but the new feature on the K3 made for a very arm chair copy from Solvenia.
Thanks Elecraft
Don...w2xb
--
View this message in context:
http://elecraft.365791.n2.nabble.com/APF
.
Can't say enough how impressed I am with this rig and the APF.This rig gets
better by the day.
Donw2xb
--
View this message in context:
http://elecraft.365791.n2.nabble.com/APF-magic-tp5805066p5805066.html
Sent from the Elecraft mailing list archive at Nabble.com
Just did the upgrade. Outstanding. P3 is a joy.
Don...w2xb
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Beta-Firmware-Rev-3-57-Synchronous-AM-Detection-AM-S-misc-improvements-tp3983997p5920508.html
Sent from the [K3] mailing list archive at Nabble.com
Hello group,
a little off subject, need a little help. I am using my bug with the K3 and
I can hear a slight bounce or scracthy sound as I hit the Dash Key. The
settings and dot side is fb. Contacts are clean. Is here a fix for this?
Don...w2xb
--
View this message in context:
http://n2
Hello Group,
Does anyone in the group run remote with thier K3?
I am just getting all setup and can control the rig from a laptop away from
the shack. Is there any way I can turn the rig on/off. So when I'm out of
town I don't have to keep the rig on all the time.
Thanks..
Donw2xb
--
View
Thanks to all that responded to my call for help.
Will work on it tonight and let all how I make out.
Donw2xb
--
View this message in context:
http://n2.nabble.com/remote-ON-OFF-tp4892000p4892000.html
Sent from the Elecraft mailing list archive at Nabble.com
and sound. Waiting for
Trx-manger and that will do the rig control..
Thanks to all
Don...w2xb
--
View this message in context:
http://n2.nabble.com/Remote-success-tp4892822p4892822.html
Sent from the Elecraft mailing list archive at Nabble.com
be nice to
have a cat command to turn on the rig...
Don...w2xb
--
View this message in context: http://n2.nabble.com/remote-tp4921373p4921373.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home
Hello Adi,
What was the problem?
Don...w2xb
--
View this message in context:
http://elecraft.365791.n2.nabble.com/HI-RFI-no-power-output-tp7430369p7556919.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft
. fb
Is there a setting that I am missing ??
Don...w2xb
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KAT500-tp7565418.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing
Kat500 problem solved.
reset the parameters in the utility program (EEINIT;)
That did it. Kat500 is working great..
thanks to all that responded.
Don...w2xb
P.S. great reflector!!!
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KAT500-tp7565418p7565438.html
Sent
Kat500 problem solved.
reset the parameters in the utility program (EEINIT;)
That did it. Kat500 is working great..
thanks to all that responded.
Don...w2xb
P.S. great reflector!!!
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KAT500-problem-solved
turning on the KPA500?
Don...w2xb
--
View this message in context:
http://elecraft.365791.n2.nabble.com/kat500-tp7565384.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net
) registering when I
key the amp. Shows a minus zero. Am I missing a setting in the K3? I can
transmit fb in on the K3 and the amp is in stby.
Don...w2xb
--
View this message in context:
http://elecraft.365791.n2.nabble.com/kpa-500-setup-tp6387309p6387309.html
Sent from the Elecraft mailing list archive
...w2xb
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KPA-500-tp6388156p6388156.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
. Went into config and turned it off. All is
working fb now.
Thanks Jack
Don.w2xb
--
View this message in context:
http://elecraft.365791.n2.nabble.com/update-to-KPA-problem-tp6388438p6388438.html
Sent from the Elecraft mailing list archive at Nabble.com
bands and going from normal barefoot power (75 w) and back to the
amp was really a treat. no noise or excessive heat etc.
Thanks for another great piece of gear Elecraft.
I am a believer
Don...w2xb
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K-line
w2xb
--
View this message in context:
http://elecraft.365791.n2.nabble.com/kpa500-aux-cable-problem-tp6441865p6441865.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http
Forgot the mention that the tx error message comes on with the amp off or on.
Donw2xb
--
View this message in context:
http://elecraft.365791.n2.nabble.com/added-note-to-the-kpa500-problem-tp6441902p6441902.html
Sent from the Elecraft mailing list archive at Nabble.com
now and all seems to be working great.
Donw2xb
--
View this message in context:
http://elecraft.365791.n2.nabble.com/update-to-aux-cable-problem-tp6463941p6463941.html
Sent from the Elecraft mailing list archive at Nabble.com
.
Don't know if this will help, but its worth a try..
Don...w2xb
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KPA500-question-tp6477132p6480903.html
Sent from the Elecraft mailing list archive at Nabble.com
New P3 beta update ( MCU 01.08 / 6-7-2011) is outstanding
Don...w2xb
--
View this message in context:
http://elecraft.365791.n2.nabble.com/p3-beta-upgrade-tp6489707p6489707.html
Sent from the Elecraft mailing list archive at Nabble.com
Can't say enuff about the KPA500. Works like a charm. Smooth as silk!! Only
one thing bugs me.. hi hi
Wish the buttons were GRAY like the K3 and the P3. With my old eyes I have
to get up close at times to find the on button :-))
Don...w2xb
--
View this message in context:
http://elecraft
power.
Anyone else have this problem?
Don...w2xb
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KPA-kicking-out-tp6635462p6635462.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing
this is happaning?
Don...w2xb
P.S. does the same using external wattmeter (W2)
--
View this message in context:
http://elecraft.365791.n2.nabble.com/k3-and-power-out-on-wattmeter-tp6761520p6761520.html
Sent from the Elecraft mailing list archive at Nabble.com
A little off subject. Can anyone help me setup VPSE emulator. I would like
to use my logging software etc. using the same serial port. Keep trying to
set it up but can't seem to get it going. Any help would be appreciated
Don.w2xb
--
View this message in context:
http://elecraft
Hello Jim,
Went through the setup like you instructed. No luck. my pc is a 64 bit and I
do have the 64 bit version of Vpse. Will play around with it a see what I
come up with.
Donw2xb
--
View this message in context:
http://elecraft.365791.n2.nabble.com/vpse-tp6801082p6802465.html
Sent
Just an update on the Vpse problem. Fixed. With the help from this reflector,
its now working great.
I did do the serial port setup in the vpse software after I choose the vpse
port..
Thanks guys...
Don...w2xb
--
View this message in context:
http://elecraft.365791.n2.nabble.com/vpse
64 matches
Mail list logo