Yes, a 2m amp from Electraft would be desireable.
73, Brian KD0HII
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Phil
Hystad
Sent: Monday, September 21, 2015 16:58
To: Elecraft Reflector
Subject: [Elecraft] KX3 (or, K3) 2-meter solid-state
the Utility.
I just downloaded the latest utility and installed/ran without issue. This
is Win10 x64, but I also run it on W7.
Ken K6MR
From: Brian Linn
Sent: Sunday, August 23, 2015 17:22
To: elecraft@mailman.qth.net
Subject: [Elecraft] KAT500 Utility
To Anyone!
Issue: KAT500
[mailto:w...@i29.net]
Sent: Monday, August 24, 2015 20:41
To: Brian Linn
Cc: Warren Merkel; elecraft@mailman.qth.net
Subject: Re: [Elecraft] KAT500 Utility
Hi to the group.
I have not wanted to get into this discussion but I have had a similar problem
with other programs and will throw this out
To Anyone!
Issue: KAT500 Utility will not run
Version: 1.14.4.10
Windows: 7 Pro 64 bit
Observations:
1) It appears to correctly install
2) When one attempts to start the utility, it shows in the Task Manager
as a process (KAT500Utility.exe *32)
3) The application window
Don Elecraft:
I'm having difficulty connecting to either my KAT500 or W2 via a serial
cable. Is the KSXER (3.5mm to DB9-F) any different from the standard 3.5mm
to DB9-F that I already own?
Brian KD0HII
__
Elecraft mailing list
All:
When attempting to run the TX Gain Calibration with the latest K3 utility,
post installing the latest firmware, the message back is that the KPA3 and
PA PWR settings are incorrect and must be set a certain way in order for it
to run. The problem is that the settings are exactly as the
Alan:
Mine beeps and displays BND END and does so at precisely the edge of a band.
Brian KD0HII
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of G4GNX
Sent: Sunday, October 26, 2014 04:50
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3
All:
Has anyone measured the latency when using the K3/0 to run a remote K3? Is
it good enough for contesting?
73' Brian KD0HII
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
After much time searching the web, I've been unable to locate a 3 ring
binder to hold full size certificate sleeves, which are too wide for the
standard 8.5 x 11 binder.
Any suggestions will be very much appreciated. Feel free to e-mail direct,
off list . I've no desire to create clutter on
All:
This issue sounds familiar. I'll be operating along in the middle of an SSB
QSO and suddenly the KAT500 goes wild. The SWR displayed on the meter is
HIGHER than the antenna WITHOUT a tuner. The sad part is that it will go on
for maybe 10 seconds and no match is found (odd when considering
Just finished building the KPA500 kit and ran the Test the power supply
voltage. on page 7 of the owner's manual. The result of the HV test is that
the LCD indicates the voltage to be .1, nowhere near the 65-85 indicated as
required.
I've double checked:
- Fuse Block Voltage Selection is set to
Much thanks for the replies . issue solved.
One of the replies suggested checking the Interlock switch, which caused me
to wonder if the top cover had to be on the unit before trying this voltage
test . sure enough it does . and now the test has a good result.
The kit instructions (page
To the point!
How many hours should I expect to spend assembling my new KPA500 kit?
How many hours should I expect to spend assembling the KAT500 kit?
Brian KD0HII
__
Elecraft mailing list
Home:
Does anyone know what the term matches means in relation to the phrase
Matches approx 10:1 SWR at 500-600 W?
Does it mean: a) that will achieve 1:1 of the antenna is at 10:1, or b) that
will achieve the accepted match value of 2:1 when the antenna is at 10:1?
Or, stated another way, what
Agreed ... sure would like a command that could be used within a macro to
change the RX EQ settings, like the one for transmit EQ.
KD0HII - Brian
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of ab2tc
Sent: Monday, November
My kids are involved in 4 H. I'll be hosting this Sunday's meeting and
giving a talk about HAM radio. The talk will be followed by on air activity,
which will be more fun if we find some stations to work! See below if you'd
like to encourage some kids about our hobby.
What: HAM station
All:
In seeing some discussion on the exchange of funds when selling Electraft
equipment, I wanted to share a possible solution with everyone: Dwolla. When
I first heard about this (and signed up), I thought about how I might use
this in the future when buying or selling used equipment.
No, the RE command is not implemented. I've suggested it, but it mayn't be a
popular request.
There is long work around, something akin to a macro that runs through the
keystrokes that one would use in doing the settings manually.
Brian KD0HII
Rick Stealey wrote:
I'm trying to learn
Everyone:
Lisa (of Elecraft) and I have been discussing Elecraft having a booth at the
Des Moines Radio Amateurs' Association Hamfest
(http://www.dmraa.com/hamfest) to be held on April 23. My personal K3 (s/n
3672) will be on display, opened up to show filters and the 2 meter module.
If you
It's also great for those of us using indoor antennas, where 1500 watts is
not a reality.
Brian
KD0HII
500 W (+) is the ideal output level for many operators and situations.
Call it medium power, if you will -- but the KPA500 can get the job
done, while taking up just a K3's worth of space
I second a desire for an RX set command similar to the TX set command.
Brian KD0HII
Hi again,
I am still looking for an answer to this. Or let me rephrase the question:
Is there a plan to provide a command to set the RX equalizer in the
foreseeable future? Or alternatively to provide separate
I see where one can program the TX settings using the TE command to use in
a macro. I cannot find a corresponding RE command in the K3 Programmer's
Reference for macro use. Is there no such command? If so, where is it
documented? If not, anyone have an idea as to why? If not, what's the best
work
All:
The issue has been resolved. It was an Operator Induced Open Head Space
Issue related to the operation of the wattmeter, which seems to work
better than its operator!
73 Brian KD0HII
__
Elecraft mailing list
Home:
Brian:
Not sure you'd rec'd this so am forwarding as a second attempt.
73s Brian KD0HII
-Original Message-
From: Brian Linn [mailto:br...@brianlinn.com]
Sent: Thursday, December 10, 2009 8:55 PM
To: 'elecraft-ow...@mailman.qth.net'
Subject: Double the messages
Brian:
You we so
All:
Clearly, this went to the reflector in error. What a mess I have on my
hands!
Brian
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Thanks to those of you responding. The solution was in using the H
setting on MIC SEL. The only thing yet required is some final tweaking
of the transmit EQ.
73 Brian KD0HII
__
Elecraft mailing list
Home:
26 matches
Mail list logo