8 and R79 are still OK.
> If the encoder does not get voltage(s) via these resistors if will never
> work.
> 73 Henk
> PA0C
>
> -Oorspronkelijk bericht-
> Van: elecraft-boun...@mailman.qth.net
> Namens Christian Janssen DL1MGB
> Verzonden: zaterdag 24 april 2021 0
Am 24.04.2021 um 09:52 schrieb Christian Janssen DL1MGB:
> Hi Gernit,
>
> maybe I was a bit unclear. The RIT didn't work before I changed the encoder.
> And it still doesn't work after I replaced the encoder by a brand new one
> directly shipped from Elecraft.
>
Hello,
after doing some refurbishing (changing rotten connectors, cleaning,...) I was
curious if changing the RIT encoder will make the RIT work again. But it
doesn't.
K3 #1532
Firmware 5.67
I can press on the RIT and XIT button and it shows RIT and XIT in the display,
the green LED below
24.03.2021 um 21:03 schrieb Christian Janssen DL1MGB:
> Hello,
>
> it happened during the Russian DX Contest last Saturday, from one second to
> another. No output. When I tune the display looks like this:
> http://dl1mgb.com/temp/k3_no_power.jpg
>
> Following condi
DL1MGB
Am 24.03.2021 um 21:03 schrieb Christian Janssen DL1MGB:
> Hello,
>
> it happened during the Russian DX Contest last Saturday, from one second to
> another. No output. When I tune the display looks like this:
> http://dl1mgb.com/temp/k3_no_power.jpg
>
>
an happen.
> Or give me a call, # sent separetly.
> Vy73
> Harald
> DD0VS
>
> .-.-. --... ...-- -.. -.. - ...- ...
>
>> Am 25.03.2021 um 05:35 schrieb Christian Janssen DL1MGB :
>>
>> I am not sure if there is a frequency shown when in TUNE mode. My mem
e also with
> help of the list here.
>
>
>
> Receiving is working?
>
>
>
> Vy73 & GL
>
> Harald
>
> DD0VS
>
>
>
>
>
>
>
> Gesendet von Mail <https://go.microsoft.com/fwlink/?LinkId=550986> für
> Windows 10
&
3 DVM , voltage is 13 volts.
>
> Push Tune button (long for TX – with RF)
>
> Adjust PWR knob Clockwise for Max RF power.
>
> Take readings………. Ray WA6VAB K3
>
>
>
> *From: *Christian Janssen DL1MGB <mailto:ch...@dl1mgb.com>
> *Sent: *Wednesday, M
rking?
>
>
>
> Vy73 & GL
>
> Harald
>
> DD0VS
>
>
>
>
>
>
>
> Gesendet von Mail <https://go.microsoft.com/fwlink/?LinkId=550986> für
> Windows 10
>
>
>
> *Von: *Christian Janssen DL1MGB <mailto:ch...@dl1mgb
Hello,
it happened during the Russian DX Contest last Saturday, from one second to
another. No output. When I tune the display looks like this:
http://dl1mgb.com/temp/k3_no_power.jpg
Following conditions:
- sending into a 50 ohm dummy load
- no matter how many watts are set with PWR knob
-
10 matches
Mail list logo
