[Elecraft] Pigtail & Cable for sale

Pigtail from http://pignology.net and RS232 to electrify KX3 control cable. Manual available at Pignology.net $100 including shipping. PayPal requires an additional $5.00 unless you simply send money. contact off net if required at my email

Re: [Elecraft] K3 Filters for sale

Filters are spoken for… 73 Jim K8JK > On Oct 14, 2019, at 5:17 PM, Roberta Estes via Elecraft > wrote: > > Elecraft K3 filters surplus to my needs > > KFL3A-2.8K (Elecraft Branded Inrad filter) $80 shipped USPS > > KFL3A-6K (Elecraft Branded Inrad Filter) $80 shipped USPS > > KFL3B-FM

Re: [Elecraft] KX2 Use Phones message

Hi Scott Read all about dual watch and the need for stereo headphones on page 25 of the KX2 manual. 73 Jim K8JK Sent from my iPhone > On Nov 18, 2016, at 4:10 AM, Scott Russell wrote: > > I was tuning around the 80m band this morning and when I adjusted the > volume

[Elecraft] KXV3A For Sale

I upgraded my K3 to the new KXV3B and have a perfect condition KXV3A for sale for $85 shipped anywhere in the USA via USPS Priority Mail. Includes: circuit board, TMP cable assembly, back panel insert, and hardware kit. Reply to me directly at k...@att.net 73 Jim K8JK

[Elecraft] Using yet another low cost headset with Elecraft Transceivers at 2016 Field Day

In my geography, there is a definite divide relative to spending money on radio gear. On one hand, there are so many of us that own and use Elecraft gear, the joke is that I’m the President of JERK (Jim’s Elecraft Radio Klub). On the other side of the ledger, unless they get the equipment for

[Elecraft] KXPA100 for sale

KXPA100 Amplifier, with KXAT100 tuner, and KXPACBL kit. Amplifier serial number is 0278 All original cables, and manuals included. $895.00 including shipping in the CONUS. Email me directly k...@arrl.net __ Elecraft mailing list

[Elecraft] ESTATE SALE: K2 with options KPA100 +KAT100 in EC2 Enclosure

Estate radio for sale: K2 Transceiver (serial number in 58xx range) Transceiver includes: KSB2 SSB Module K160RX 160 Module KNB2 Noise Blanker KAF2 Audio Filter KAT2 20 Watt Tuner KIO2 Serial Port Kenwood Microphone Rework Modules KPA100 KAT100 (100 Watt Amplifier and 100 Watt Tuner) Built

[Elecraft] New Product to help many K3/KX3 users

https://factualradio.wordpress.com/2015/03/16/geen-idee-engineering-companion-radio-assistant-peripheral/ https://factualradio.wordpress.com/2015/03/16/geen-idee-engineering-companion-radio-assistant-peripheral/ Now we’re getting some place!

Re: [Elecraft] For Sale: TWO Raspberry Pi Spectrum Displays (minus SD MEMORY CARD

Both Raspberry Pi spectrum displays have found new homes. 73 Jim K8JK Sent from my iPad On Jan 4, 2015, at 8:38 AM, Jim Kvochick k...@att.net wrote: Now that I have my PX3 on my KX3, I have some hardware that I'd like to get rid of. I have TWO Raspberry Pi model B units, each

Re: [Elecraft] Strange K3 KPA500 Issues fixed with a longer coax cable?

We tried all the normal common mode tricks, but the feedline length appeared to be the most effective. Jim K8JK Sent from my iPad On Nov 19, 2014, at 7:32 AM, N2TK, Tony tony@verizon.net wrote: I had a similar problem many years ago with an L-4B amp. I wonder if adding ferrite to

[Elecraft] WTB: Used (but operational) KAT2 Tuner

Hi, I have an older ham friend who just loves his little K2 - he's very comfortable with the little rig. He has recently been required to move his QTH, and doesn't have quite the antenna farm that he once had. His K2 doesn't have the internal tuner. It's my opinion that he would benefit

Re: [Elecraft] KX3/PX3 Beta Firmware loading with Mac OS Mavericks (10.9.5)

Mark, I have only ever had one issue with using my Mac on ELECRAFT files, and that was when I failed to refresh the local caching. I have quite routinely copied the zip files to my Mac desktop, and pointed the KX3 or PX3 utility to those folders to install new firmware. Cheers Jim K8JK

Re: [Elecraft] KX3 2m module problem: missing band map for 144

Make sure you power off the radio after step 4, then power it back on again before going to step 5. Make sure you are unlocking the settings by holding in the KHz button... Jim K8JK Sent from my iPad On Aug 16, 2014, at 9:08 PM, Louis Brown rfe...@everestkc.net wrote: I followed these

[Elecraft] Belt clip for KX3 after you install the 2 or 4 Meter module?

Now that I've installed the 2 meter module in my KX3, are there plans in the works at Elecraft to provide a nice belt clip for my KX3, so I can carry the radio with the antenna held vertically? Oh yeah, and how about a KXPA100-2 amplifier? I'm just kidding. Cheers Jim K8JK Sent from

Re: [Elecraft] k3 remote and uverse

It has worked just fine here 73 Jim K8JK Sent from my iPad On Aug 21, 2013, at 12:01 PM, Buddy Spiegel buddy...@gmail.com wrote: I am thinking of adding the k3 remote feature to my rig. can someone share their experience doing this with ATT uverse as Internet service provider. w3bs,

Re: [Elecraft] Microphone for the K3 questions

Joe, Have you been a ham that long? 73 Jim WB8AZP Sent from my iPhone On Jun 7, 2013, at 4:13 PM, Joe Subich, W4TV li...@subich.com wrote: Gary, It's possible that the HC-4 has gotten rough over the years - I had an HC5 element in the Heil ProSet give up after about 30 years G.

Re: [Elecraft] K3 Setup Failing

Is your transmitter in tx test mode? Jim WB8AZP Sent from my iPad On May 25, 2013, at 5:58 PM, Brian F. Wruble bwru...@gmail.com wrote: Hi guys, I am in a fight with my just assembled K3. I have gone through all the steps, and everything worked. However, I could not get the sub-receiver

Re: [Elecraft] KPA3 Fan Speed

Verify you have the fans plugged in correctly. 73 Jim WB8AZP Sent from my iPad On May 24, 2013, at 7:28 PM, Brian F. Wruble bwru...@gmail.com wrote: Hi guys: I am assembling a K3, and I am at the point where I am adding the KPA3 amplifier. There is a step where you test the fans ---

Re: [Elecraft] KX3 S/N 2294 doen't start

Make sure as well that the flex cable is plugged in correctly. I suggest reviewing the section of the manual. 73 Jim WB8AZP Sent from my iPhone On Nov 4, 2012, at 8:15 AM, Matt Zilmer mzil...@verizon.net wrote: Try re-seating the flex cable between RF and FP boards. matt W6NIA On

Re: [Elecraft] KX3 Cheat sheets

Exactly my thoughts Bob. I printed those two pages out and laminated them. Of course, just in case, I did print out an extra copy of the manual to carry in my extended go kit. Jim WB8AZP Sent from my iPad thingie On Jun 4, 2012, at 10:33 PM, Bob Cunnings bob.cunni...@gmail.com wrote:

Re: [Elecraft] Portable Keyboard for KX3

http://www.icircuits.com/store/prod_misc_main.html Has a PC to ASCII converter Jim WB8AZP Sent from my iPad On Apr 15, 2012, at 8:35 PM, Don Wilhelm w3...@embarqmail.com wrote: John, You would be referring in a keyboard to ASCII conversion. During my early years (1970s timeframe), with

Re: [Elecraft] Status update on the KX3

Is it worth exploring the notion of being able to opt out of a printed manual? I have plenty of resources here to print and bind my own I think I have seen some of this on an older thread. 73 Jim WB8AZP Sent from my iPad On Mar 27, 2012, at 2:31 PM, Wayne Burdick n...@elecraft.com