Many thanks to all of you who responded to my post yesterday relating to the
after market PTO knobs for the K3 and KX-3. Your input was well appreciated.
Bob Wilderman
K3SRO
dlrwi...@verizon.net
__
Elecraft mailing list
Home:
Does anyone know if the after market metal PTO main and sub tuning knobs for
the K3 or KX3 (main PTO) will damage or cause pre-mature wear and tear on
the optical encoders? Any feed back on how the weighted metal PTO will
improve the feel while tuning would be welcome. They are kind of
Does anyone know the output of the KX-3 on 2 meters when the 2 meter option
becomes available?
Will the 100 watt amp option with internal antenna tuner work on 2 meters as
well as the HF bands and 6 meters?
What will the output power be on 2 meters using the optional KX-3 100 watt
amp (50
I have the special cable from Array Solutions, the K3THP1 to connect the
K3 to the THP HL-1.5KFX amp.
When looking at this cable, I notice there is a 15-pin plug, an ALC
connection via a RCA phono plug and a round 5-pin DIN plug (most likely for
the Yaesu
plug-in on the rear of the THP amp.
I
Has anyone suggested that Wayne and Eric develope a remote keypad for the
K3. The keypad would be used as a direct entry band switch for each band
from 160 through 2 meters (if 2 meter module is installed in the K3). It
would also be nice to have a couple of buttons that could be programed for
Does anyone know the approximate weight, size (HxWxD) of the KPXA100 for the
KX-3? Are their any actual photos of this option other than the posted
drawing?
Any idea of the price for the amp and optional 100 watt auto antenna tuner?
When will these options become available?
Will there be a
See message below
- Original Message -
From: Linda and Bob dlrwi...@verizon.net
To: elecraft@mailman.qth.net
Sent: Monday, April 30, 2012 12:40 PM
Subject: KPXA100 amp for KX-3
Does anyone know the approximate weight, size (HxWxD) of the KPXA100 for
the KX-3? Are their any actual
Can you use the Yamaha CM-500 head set with the KX-3? I use this headset
with my K3/100. It works very well with this radio. I believe the CM-500
came with some kind of adaptor plug for the mic input (1/8 to 1/4 or vice
versa?). I don't believe the speaker plug will be a problem using this
- Original Message -
From: Linda and Bob dlrwi...@verizon.net
To: elecraft@mailman.qth.net
Sent: Monday, January 30, 2012 02:05 PM
Subject: 1/4 paddle jack rear panel of K3
The 1/4 paddle jack on the rear of my K3/100 wiggles much more than other
rear panel jacks. Is this normal? I
with tooth lock wahsers 1/4 long [10
screws in total]?
Bob Wilderman, K3SRO
dlrwi...@verizon.net
K3/100 SN# 4669
- Original Message -
From: Rick Tavan
To: Linda and Bob
Sent: Tuesday, January 31, 2012 01:11 PM
Subject: Re: [Elecraft] 1/4 paddle jack rear panel of K3
You
The 1/4 paddle jack on the rear of my K3/100 wiggles much more than other
rear panel jacks. Is this normal? I am afraid that the paddle jack may
disconnect from the PCB that it is attached to inside the rig.
BTW, the 1/4 key jack next to the paddle jack does not wiggle at all.
It only seems to
What does the standard DC power cable for the KX-3 look like? What type of
connectors are on each end of the cable? How long is the cable?
I imagine that when you purchase the KPA100 amp and auto antenna tuner, it
will come with a different DC power cable as a standard feature (similar to
the
Does installing the internal 20 watt internal antenna tuner in the KX-3
cause a problem later if you opt for the 100 watt amp and higher powered
ant. tuner? Will you be able to bypass the 20 watt tuner via a menu setting
for any QRP work? Has this been discussed before? Thanks.
Bob Wilderman,
Has anyone tried to use Energizer L91 AA lithium chemistry batteries in
the internal battery compartment of the K1-4? The cells are 1.5 volts @ 2900
maH. They are not rechargeable; cost is around $2.00/cell; very slow
constant discharge time. Will these cells fit inside without any issues with
Does anyone know if the new KX-3 will use the same style and size DC
connector (2.1mm) as the K1 or will it use the Anderson pole connector like
the K3?
From the Elecraft photos of the KX-3, the style appears to be the same as
the K1. I imagine that the 100 watt QRO amp option would use the
Need help. See message below, thanks!
- Original Message -
From: Linda and Bob dlrwi...@verizon.net
To: elecraft-requ...@mailman.qth.net
Sent: Sunday, September 04, 2011 04:31 PM
Subject: K1-4 niMh 1.2v batteries
I have the internal battery option installed on my K1-4. I searched
Has anyone used the Par ENDFEDZ dipole antennas for QRP in the field or at
home for fixed operation? They seem to have very good reviews on Eham.net. I
am interested in their 30 meter and 20 meter monoband dipoles to use at home
and in the field with my K1-4 and maybe my future KX-3. Thanks.
Will Elecraft improve the feel and drag of the main tuning PTO knob on the
new KX-3? I hope they will increase the smoothness of the knob. I find the
rubbing of the felt washer a little noisy and annoying. I hope they put that
on our wish list.
Bob Wilderman, K3SRO
Will the KX-3 be available as a factory assembled rig (KX-3F) or only kit
form? What is the size, cost and weight of the 100 amp? Thanks.
Bob
K3SRO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Pristine, like new K1 wanted with KFL1-4 (40, 30, 20, 15); KFL1-2 (80,
17); KAT1, K1BKLT, KNB-1; KTS1 would be a bonus with all documentation and
manuals. Contact Bob, K3SRO at dlrwi...@verizon.net
__
Elecraft mailing list
Home:
My K3 arrived today. I noticed that the MAIN VFO tuning knob is a little stiff
for my liking. I also hear a rubbing sound behind the knob, but in front of the
Plexigals panel. Is there any easy adjustment to allow the knob to spin more
freely? Is there a drag tension control somewhere? All of
Can you use any 8-pin Kenwood mic with the K3 without any modification (e.g.
MC-42S, MC-60A, MC-50 etc.)? I believe the K3 uses the Kenwood protocol for the
wiring of their mics. I have a MC-60A desk mic and MC-42S hand mic. I was
thinking of selling them for the Heil PSE HC-6 (see below).
I
I am ordering my K3 sometime next week. I want to make certain that I order the
suitable options when placing my order. The K3 will be factory assembled. I am
not a contester. I enjoy RAG CHEWING on SSB and CW. I do not currently do any
digital modes; not active on HF FM; do not normally listen
Does anyone use the newer Heil Pro iC Elite headset with the HC-6 element?
Elecraft does not have that model available. I imagine that you will have to
set the bias voltage for the mic. Can you use this with the K3 mic/earphone
adapter? Is that a separate option from Elecraft?
How well does
If you have the new P3 with the K3, please post some close-up photos of your
gear for all of us to view. Let us know how you like your new P3. What options
would you recommend if buying a factory assembled K3?
Thanks,
Bob Wilderman, K3SRO
Has anyone used a THP HL- 1.5KFX amp with the K3? Can you use the amp and K3
with auto band changing data? If so, does the K3 emulate either the ICOM,
Kenwood or Yaesu band tracking data? Otherwise, I would have to change the
bands manually.
Bob Wilderman, K3SRO
26 matches
Mail list logo