Hello, all!
Planning to list this on QRZ but thought I'd offer it here first.
Everything you need for SOTA, POTA, Digi Modes. Open the box, and get
started at home or afield!
I've had great luck with this KX2, just not going to be using it much this
year so I'd like it to go to someone who
Elecraft indicated this behavior pointed to a failure in the output block.
Since Elecraft has mine now for repair of this issue, we will get a definitive
answer as to whether this is firmware or hardware.
—Nate
Sent from my iPhone
> On Mar 22, 2021, at 12:02 AM, Reed Fite wrote:
>
> Dave,
Great to hear, Dave!
I’ll be posting the outcome of my KX2’s trip back to elecraft, so watch the
reflector if you’re interested in following along. As of now no ETA from
elecraft, it’s been there about 2 weeks so far.
Nate W1NAT
Sent from my iPhone
> On Mar 21, 2021, at 8:05 PM, Dave
Dave,
I have that exact problem with my KX2 on 10m. See my recent thread here:
https://www.mail-archive.com/elecraft@mailman.qth.net/msg247537.html
Elecraft support said that situation is indicative of a failure in the output
stage, and my KX2 is currently back at elecraft for repair. I sent
Unfortunately, this did not fix my particular KX2. TX Gain calibration was
completed successfully, but the same issue persists.
I also did the TX bias calibration, and noted that bis on Q6 took ~45 seconds
to complete, vs the 3-10 the manual suggested. Q7 was fast. Q6 wavered a lot
between
I have replicated this behavior both with the internal as well as the MH3
external mic. Of course set at different mic gain levels, always per the manual
which as you said suggests 5 bars of ALC. I have tried lower and higher mic
gain settings just for fun, with the same results.
I don’t
Hello! I recently purchased a KX2 (#757) from a friendly member of this list.
I have a local 10m meetup I attend frequently, and I noticed a strange behavior
that I'm now able to replicate. When I first switch to 10m, I have extremely
low output power (one bar on the RF meter), even when set
7 matches
Mail list logo