[Elecraft] Test message

Previous posts not workingchecking things... -- View this message in context: http://elecraft.365791.n2.nabble.com/Test-message-tp7629854.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list

Re: [Elecraft] Experiences using a portable HF loop

e KX3. If it works as good as I think it will, it should give me about the same performance as adding a KXPA100 - or not... that's why playing with ham radio is fun. 73's Steve WD4SDC -- View this message in context: http://elecraft.365791.n2.nabble.com/Experiences-using-a-portable-HF-loop-tp7629785p76

Re: [Elecraft] Experiences using a portable HF loop

hould give me about the same performance as adding a KXPA100 - or not... that's why playing with ham radio is fun. 73's Steve WD4SDC -- View this message in context: http://elecraft.365791.n2.nabble.com/Experiences-using-a-portable-HF-loop-tp7629785p7629825.html Sent from the Elecraft mailing

Re: [Elecraft] KX3 Mount Bracket

out my KX3 ;) ) and it has worked great! 73's Steve WD4SDC. -- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-Mount-Bracket-tp7618297p7618306.html Sent from the Elecraft mailing list archive at Nabble.com. _

[Elecraft] [KX3] How to use manual notch in SSB mode

c window), but it's a blind adjustment. And then the macro name sticks until you do something to update the VFOB display (like adjust BW). If you just send the commands using the KX3 utility program, it works great, but you need a pc :\. Perhaps there is a macro work-around? 73 Steve WD4SDC -

Re: [Elecraft] KX3 Notch Filter (Was Noise Blanker Comments)

very easy to apply rule #1: Don't acknowledge the presence of the interferer - because they are no longer there! This is especially useful if the RFI is not an "antenna matching enthusiast", and does have RX mode :(. Happy Holidays! 73, Steve WD4SDC -- View this message in contex

Re: [Elecraft] KX3 VSWR problem (WD4SDC)

this message in context: http://elecraft.365791.n2.nabble.com/Re-KX3-VSWR-problem-WD4SDC-tp7610860p7610870.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/

Re: [Elecraft] KX3 VSWR problem

ontribute back to the list - as I have learned a lot using this resource. Steve WD4SDC -- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-VSWR-problem-tp7608809p7610821.html Sent from the Elecraft mailing

Re: [Elecraft] KX3 VSWR problem

WD4SDC wrote > Equipment: > KX3 S/N 7210, FW 02.25 > > Problem: > 6M band -> VSWR 1.8:1 (KX3 meter) on 50ohm load connected directly to ant > connector (no cable). > > MSG to Elecraft support unanswered (which seems uncharacteristic, based on > rep) UPDATE: Ju

[Elecraft] KX3 DSP Filter Plots

Hi All, There were some earlier posts about K3S DSP filter plots and a link to clifton labs : http://www.cliftonlaboratories.com/elecraft_k3_noise_blanker_and_crystal_dsp_filtering.htm Does anyone have plots for the KX3 DSP filters? Thanks, Steve WD4SDC -- View this message in context: http

Re: [Elecraft] KX3 VSWR problem

Rick Robinson wrote > Could it be your load is not rated to 50 MHZ ? Some are only good to 30 > MHZ. Hi Rick. Good point. I should have included my load spec w/ the "facts": I'm using a Narda 40W DC->12GHz w/ N->BNC adapter I borrowed at work. And verified it @ 50MHz - just because sometimes

[Elecraft] KX3 VSWR problem

1:1 if enabled and tune requested. After ATU match, 25ohm load yields 2:1 (KX3 meter test - OK). MSG to Elecraft support unanswered (which seems uncharacteristic, based on rep) Looking for input on how to identify/fix problem. Thanks, Steve, WD4SDC. -- View this message in context: http://elecr

Re: [Elecraft] KX3 VSWR problem

WD4SDC wrote > MSG to Elecraft support unanswered (which seems uncharacteristic, based on > rep) I was contacted by elecraft support shortly after this post. Will be running some tests per their advice. Steve WD4SDC -- View this message in context: http://elecraft.365791.n2.nabble.c

[Elecraft] KX3 6 meter VSWR issue.

great radio!...as I'm sure you have heard at least 7210 times;) I'm am having alot of fun with this radio. It's amazing what you can do on 40M with 3 watts and a dipole supended 10ft above salt water on a wood pier railing (long story) - 40dB C/N at 125Mi NVIS path. Thanks, Steve WD4SDC -

Re: [Elecraft] Scanning and channel hopping question...

There's actually a variable in the source code called scanWorthy that accrues intel about the signal :) Info at the speed of NOW - and from the guy who wrote the code, no less. And I agree w/ NT6Y - it is impressive. As the guy who wrote the firmware, I'm happy to find that someone else

[Elecraft] Scanning and channel hopping question...

solid and tune in milliseconds. Thanks to all on the site for LOTS of other very useful questions/answers/ideas. Steve WD4SDC -- View this message in context: http://elecraft.365791.n2.nabble.com/Scanning-and-channel-hopping-question-tp7595522.html Sent from the Elecraft mailing list archive