Need to thin the herd a little.
- Elecraft W2 power/SWR meter,
- 2 sensors - 200 W & 2 kW
- sensor cables (RJ45-RJ45) 2x
- USB cable (USB-A - 3.5mm TRS )
- power cable, APP terminated.
Asking $600.
73, de KU1T
_zjt
--
> 3. switchbox KX3 to signalink/mike+headphones (her...@comcast.net)
I did something like that few times using analogue mixer, with 2 separate
stereo buses.
One bus is for audio from the rig(s) - first K3, FTDX5000, Yaesu 7900 into the
computers with headphone monitoring;
One bus is for
First, thanks for all the replies.
Now to the findings.
1) use of “|” to nuke diddles - does not work for me.
HW is KX3 #10868, MCU software 2.95, DSP 01 52.
Set for FSK D.
When sending from KX3 utility, terminal window ( last tab ), there is no
extended diddle.
When sending from
Getting ready for this weekend RTTY.
Still fighting with a 4 sec diddle at the end of KY commands...
Anyone found which character(s) can stop / abort the 4 second diddle at the end
of RTTY transmission ?
It is present when using KY command from KX3 utility, from macros via utility,
from
Anyone knows what is the thin display ( I think LCD ) used by Eric in the
latest K4 YouTube video ?
The one sitting on top of K4: https://www.youtube.com/watch?v=c2gQbj8eGGI
73, de KU1T
_zjt
--
Zbigniew J. Tyrlik DoD# 0759
G’day.
While setting my KX3 (K3 was sold few years ago), I was looking for the way to
adjust pitch of TRRY tones.
Looks like it is fixed at 915 - and no adjustment is possible.
Am I correct ?
73, de KU1T
_zjt
--
Just working on such project - it is possible, using USB mic, and ViceMeteer
Banana or Potato. Nice description at
https://forums.qrz.com/index.php?threads/going-software-defined.650584; I
added also ability to use WSJTX, or any AFSK modes. Mic is connected to
computer; Banana does mixing
> On Sep 22, 2017, at 11:30 AM, Wayne Burdick wrote:
>
>>> On Sep 21, 2017, at 10:34 PM, Wayne Burdick wrote:
>>>
>>> VFO A controls both receivers in diversity mode, but VFO B can be tuned
>>> separately. Typically it would be used as a holding register
;
>
>
>
>> On Sep 21, 2017, at 6:17 PM, Zbigniew Tyrlik <jow...@gmail.com> wrote:
>>
>> Freshly updated K3 by factory.
>>
>>
>> Yes, I know the VFO lnk is now a menu item…
>>
>>
>> but:
>>
>> 1) use
Freshly updated K3 by factory.
Yes, I know the VFO lnk is now a menu item…
but:
1) use menu to turn VFO linking on.
works as expected. Turning VFO A properly changes VFO B.
2) turn SUB ON.
works as expected, can adjust VFO B separately, and then VFO A will move both
properly.
3)
just received used SVGA board.
Installed following the manual.
Nothing on external display.
tried 2 cables, 2 monitors.
Upgraded firmware on P3 to current 01.54, svga is on 01.25; all SVGA menu
options are accessible… but nothing on external display.
Opened top of P3, the cable is
Dear group wisdom..
I am reconfiguring my shack. As part of it, trying to set up
K3 - mkeyerII - StationMaster - Quadra.
Got almost everything working..but.
On Yaesu FTDX5K, there is a nice rca jack called “TX REQ”. Closing this port
has an affect similar to pushing TUNE button on K3- rig
12 matches
Mail list logo