[Elecraft] K3 UTILITY QUESTION

I had previously used my K3 utility program with my K3 that had the standard analog I/O board module.  I recently upgraded to the KIO3B and now my k3 utility no longer functions.  All the functions on the KIO3B work fine.  What is necessary to get the K3 utility running again? I do not need it

[Elecraft] STATIONMASTER, K3, P3, AND PC INTERCONNECTION

I am confused about the connection and communication between my PC and my MicroHam stationmaster (SM), K3, P3 and hope that someone can help clear this up. I just modified my K3 to upgrade it to the KIO3B digital I/O board.  Before upgrading to the KIO3B,  I had used a custom RS232 cable to

[Elecraft] K3 INTERFACE WITH LDG Z100A

I have tried to find a cable that goes from my K3 to the LDG Z100A tuner but all I see is just a cable with a Molex like connector going to the tuner and nothing on the other end of the K3 except bare wires (i.e. no connector). Does the tuner have to get connected to the K3 ACC jack?  Or does

[Elecraft] CABLE TO INTERFACE K3 AND LDG Z100??

This may have been answered before but I did not see anything that addressed the question below. Is there a cable available (and where) to interface a K3 and a LDG Z100 plus so that it works essentially automatically like the Icom 7300 does with the LDG tuner?  If not totally automatic,

Re: [Elecraft] WHICH USB ADAPTER TO STEREO PLUG TO USE

supplier of a cable that matches the E8500483 or can you recommend an appropriate USB to Stereo plug adapter? 73’s, Greg N9GB From: Jim Rhodes Reply-To: Date: Friday, July 1, 2022 at 10:44 AM To: greg best Cc: Subject: Re: [Elecraft] WHICH USB ADAPTER TO STEREO PLUG TO USE I am

[Elecraft] WHICH USB ADAPTER TO STEREO PLUG TO USE

I had a homemade cable with a 3.5 mm plug on one end which goes to the CAT connection on my stationmaster and a male DB 9 for the RS232 connection for my K3. (I do not have a USB port on my K3).  The cable was not reliable, it broke, is now too short, and I was going to replace it with the

[Elecraft] K3 AND FT8 USING CAT CONTROL NO TX RF

i have hit the wall with my knowledge of FT8. I have my K3 configured with a stationmaster that feeds the CAT control to/from the computer. I can test the CAT using the WSJT SW and it is GREEN. I can receive and decode but TX output is not working and cannot figure out why. The K3 goes into xmit

Re: [Elecraft] WANTED: P3 WITH EXTERNAL MONITOR OUTPUT

Hi Paul, Thanks very much for answering the post. Can you please send a picture or two and do you have the manual to go with it? 73’s Greg N9GB From: Paul GACEK Date: Friday, June 18, 2021 at 1:28 PM To: greg best Cc: Subject: Re: [Elecraft] WANTED: P3 WITH EXTERNAL MONITOR

[Elecraft] WANTED: P3 WITH EXTERNAL MONITOR OUTPUT

I am looking for a P3 in good condition that has external monitor output capability. I am located in Kansas City. 73’s Greg N9GB 816-792-2913 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] FT8 WITH K3 AND STATIONMASTER

I run my k3 with a microham stationmaster (SM)and the USB port on the SM is hooked to the computer while the CAT port is hooked to the RS 232 on the K3. For FT-8 will my audio cables go from the computer to the K3 or will the SM handle all that through the USB connection. 73¹s Greg N9GB

Re: [Elecraft] K3 RIT & OFFSET ENGAGES AT RANDOM

abt RFI as the amp sets next to the K3. Greg Best Sent from my iPhone > On Dec 9, 2019, at 5:46 AM, KE8G wrote: > >  > Hi Greg, > Yes, we experienced this during field day with KK5W. At first we thought > there was a problem with one of the 9 K3 rigs, so we swapped it ou

[Elecraft] K3 RIT & OFFSET ENGAGES AT RANDOM

I operated the 160 contest this weekend and I had several unexplainable consistent events. My K3 randomly engages the RIT and adjusts a plus offset of about 25-75 Hz. This was noticed about 15 times or so during the contest and nothing was consistent about it. The plus offset did not appear to

[Elecraft] BAND CHANGE DEFAULT

Currently, the K3 VFO A switches to the new band when selecting a new band but VFO B remains on the previous band. I can see where that might be a good thing for certain contests but how do I set the default VFO B switch so that it follows A or so that it also switches to the new band? 73¹s

Re: [Elecraft] MICROHAM USB III INTERFACE WITH K3 UTILITY DOES NOT WORK

will know that is to take my old WIN XP laptop and try it. Not what I had in mind over the DX test weekend…. 73’s Greg -Original Message- From: Henrik Stenstrom <vk2...@gmail.com> Date: Friday, February 16, 2018 at 2:55 PM To: Greg Best <gbconsultin...@gmail.com> C

[Elecraft] MICROHAM USB III INTERFACE WITH K3 UTILITY DOES NOT WORK

driver I can download and install. My K3 FW is Rev 5.38. 73¹s Greg Greg Best P.E. 16100 Outlook Avenue Stilwell, KS 66085 816-792-2913 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

Re: [Elecraft] FIRST TIME HOOKUP OF N1MM+ TO K3 VIS MICROHAM USB INTERFACE III

Rick, Thanks for advice on Utility. I downloaded and ran but still no joy. I did see FW rev 05.38. I don’t know if that cud be the problem? Greg Best Sent from my iPhone > On Feb 15, 2018, at 9:31 PM, Rick Tavan <r...@tavan.com> wrote: > > You got good advice on baud rate.

[Elecraft] FIRST TIME HOOKUP OF N1MM+ TO K3 VIS MICROHAM USB INTERFACE III

I am trying to get N1MM+ to talk to my K3 but will not do it. I am setup for 4800 B, Data 8 bits, Parity N, stop bits 1. DTR and DTS have been tried with both Always ON and Always OFF but neither one works. I have tried the Radio reset command from N1MM+ with no luck. Can anyone help? 73¹s