Hi Ron,
Terry - W7KW is the one having the problem. I hope he sees your message.
73,
Tim - N3XX
On 2016-10-15 3:53 PM, Ron D'Eau Claire wrote:
Hello Tim:
Are you changing bands? IF so be sure CONFIG:SPLT SV is YES or when you come
back split will be off.
73, Ron AC7AC
-Original Me
Try closing any logging program or other program that could be sending
commands to the K3 and see if the problem stops.
GL --- 73,
Tim - N3XX
On 2016-10-15 12:35 PM, w7kw.te...@gmail.com wrote:
When operating CW my K3 frequently drops out of Split Mode Operation. Has
anyone seen this? I
Thanks for the info Dave. My old headset needs replacement, so I'll get
an SB45 and give it a try. The price looks right :-)
73,
Tim - N3XX
On 2016-01-06 8:38 AM, Dave Hachadorian wrote:
The mic does move to full vertical to get it out of the way.
Dave Hachadorian, K6LL
Yum
& 73,
Tim - N3XX
On 2016-01-05 9:54 PM, Dave Hachadorian wrote:
Last week I posted my impressions of the Koss SB-45 here:
http://marc.info/?l=elecraft&m=145134615022993&w=2
I promised an update on long-term comfort after the RTTY Roundup
contest, so this is it. I wore this headset fo
Do you have "Flatten" checked in the Wide Graph window? If so, try
unchecking it.
73,
Tim - N3XX
On 10/23/2015 7:15 AM, Peter Pauly wrote:
1. On my K3S I'm getting audio noise over the USB connection in the upper
part of every band as shown on the WSJT-X JT65 graph. The WARC b
Try here:
http://www.powerwerx.com/wire-cable/red-black-zip-cord.html
73,
Tim - N3XX
- Original Message -
From: "Richard Fjeld"
To:
Sent: Tuesday, September 15, 2015 1:49 PM
Subject: Re: [Elecraft] K3: reverse 12 volt supply
I don't know the details of the g
Try a dummy load. It should put out a good enough signal if you're receiver
is close.
73,
Tim - N3XX
- Original Message -
From: "Tom"
To: "Merv Schweigert" ;
Sent: Tuesday, February 10, 2015 12:01 PM
Subject: Re: [Elecraft] K3: Indoor antennas at Dayton?
The comments in my previous post apparently did not come across well to
some.
Please accept my apologies. It was not my intention to offend anyone.
73,
Tim - N3XX
- Original Message -
From: "KQ8M"
To:
Sent: Wednesday, July 03, 2013 12:15 PM
Subject: Re: [Elecraft] 2
hows cancelled 12/21/2012.
You can go to the FCC search site at:
http://wireless2.fcc.gov/UlsApp/UlsSearch/searchLicense.jsp
73,
Tim - N3XX
- Original Message -
From: "Ron Midwin"
To:
Sent: Sunday, February 17, 2013 9:45 AM
Subject: [Elecraft] Help finding KB6G contact info
Please disregard my response to your first email. I sent it before seeing
your next email saying you are using FSK-D.
73,
Tim - N3XX
- Original Message -
From: "W0SD Ed Gray"
To:
Sent: Thursday, January 03, 2013 6:18 PM
Subject: Re: [Elecraft] K3 RTTY Delay on RX
I
Are you using AFSK with VOX? If so, is your VOX Delay setting longer on the
K3 that's giving you the problem?
73,
Tim - N3XX
- Original Message -
From: "W0SD Ed Gray"
To:
Sent: Thursday, January 03, 2013 6:16 PM
Subject: [Elecraft] K3 RTTY Delay on RX
I have a del
Thanks Doug. I have ordered a couple of them from DigiKey. I don't know
the brand of the connectors I'm using now, but should have just thought of
looking for Amphenol to begin with.
Thanks also to others who responded on & off list.
73,
Tim - N3XX
- Original Message -
nyone else seen this problem, and
have you found a good brand of male-male BNC connectors that corrected the
problem? If you have been able to correct this problem with good male-male
BNCs, what brand are they, and where did you get them?
Thanks for any i
The problem was with including the requested transaction number with your
paypal/oqrs request. That can't be done, since the transaction number is
not available until the paypal transaction is completed. So, I just emailed
the transaction number to him.
73,
Tim - N3XX
- Original Me
Ran into the same problem here. So I just emailed the transaction number to
UA3DX, email address found on qrz.com.
73,
Tim - N3XX
- Original Message -
From: "Terry Schieler"
To:
Sent: Wednesday, May 23, 2012 4:48 PM
Subject: Re: [Elecraft] (OT) 7O6T and OQRS
> One co
Unreliable??? I have been using the same VS-50M here for over 25 years. It
presently powere my K3 and a few other things in the shack. I leave it on
24/7 unless there is a storm coming through. Then everything is powered
down & disconnected.
73,
Tim - N3XX
- Original Mes
Have you checked CONFIG/SPKRS ? If it's set to 1, change the setting to 2.
73,
Tim - N3XX
- Original Message -
From: "Bill Miller"
To:
Sent: Saturday, May 05, 2012 7:01 AM
Subject: [Elecraft] K-3 speakers
> My K-3 (#5098) is a factory-built unit. I have tried
Thanks Iain. I do hear guys doing that on 6 once in awhile. Also just
tuning around on 6 in ssb mode, many times I will hear someone on cw, so I
can see that it might be useful there also, being able to just give him a
call instead of switching modes & retuning.
73,
Tim -
I must be missing something. Can someone explain why you would want to send
CW in SSB mode?
I did go and find the setting, changed it to SSB +CW, and it works fine
here, using firmware 4.36.
Tnx & 73,
Tim - N3XX
On 1/31/12, Frank R. Oppedijk <<mailto:fr...@qrd.nl>fr...@qrd.nl>
Have you tried turning off breakers to see if it's coming from somewhere in
the house?
GL & 73,
Tim - N3XX
- Original Message -
From:
To:
Sent: Saturday, November 19, 2011 9:18 AM
Subject: [Elecraft] Possible AC Line noise
> Yesterday, I entered excessive band nois
I was kind of hoping for a KPA1500 (160-6 mtrs).
73,
Tim - N3XX
- Original Message -
From: "Tony Estep"
To: "Elecraft"
Sent: Friday, October 07, 2011 2:53 PM
Subject: [Elecraft] email from Santa
> About this time of year, Santa and I exchange a few emails
Amazing! Many more pictures are on the W9EVT qrz.com page.
73,
Tim - N3XX
- Original Message -
From: "Peter Wollan"
To: "Elecraft Reflector"
Sent: Wednesday, September 07, 2011 10:13 AM
Subject: [Elecraft] having enough radios
> It is possible to hav
Not a problem at all. Just a setting. Change made, and now when I make a
quick check of another band, then come back to the original band, I am still
split on the original band.
73,
Tim - N3XX
- Original Message -
From: "Don Wilhelm"
To: "N3XX"
Cc:
Sent: Sun
o the CONFIG / SPLT
SV menu and set it to YES, then split would be saved.
Of course now that I have it set this way, I will have to be careful when I
qsy to a new band that split is not set when I don't want to be operating
split.
73,
Tim - N3XX
- Original Message -
From: "bri
ok at it? I went to
nabble.com, but couldn't find Elecraft or any way to make any changes there.
Thanks --- 73,
Tim - N3XX
> --
> View this message in context:
> http://elecraft.365791.n2.nabble.com/Elecraft-K-3-for-sale-tp6099622p6282240.html
> Sent from the Elecra
your computer to be sure it's not radiating
any rf.
GL - 73,
Tim - N3XX
- Original Message -
From: "Barry"
To:
Sent: Sunday, December 12, 2010 11:06 AM
Subject: Re: [Elecraft] RFI from computer
>
> Thanks for comments so far. Running wireless for internet conne
I have been running the beta 4.22 version, first time I ever loaded a beta
version on my K3. So now that the regular release is available, do I need
to load it instead, or is it the same thing as the beta version?
Thanks for any information.
73,
Tim - N3XX
- Original Message -
From
Please NO! I would rather make a mistake from time to time than be asked if
I really wanted to do it every time.
73,
Tim - N3XX
>
> On 10/23/2010 9:57 AM, Barry wrote:
>> I'm sure I'm not the only one who has pressed V>M by mistake rather than
>> M>V, or tur
I had mine shipped to a UPS store near where I work. When I went in to pick
it up, they just handed the box to me & didn't ask for a signature. I was
kind of surprised that they didn't want me to provide identification or a
signature.
73,
Tim - N3XX
- Original Message --
I use the Digi Keyer here and also PR6. Found it very easy to open the plug
coming from the Digikeyer that connects to the acc connector on the K3, and
solder in the white wire coming from the PR6. I didn't find the connector
filled with anything.
73,
Tim - N3XX
- Original Me
Sorry, I just read your message more closely, and it looks like you have
already been through those settings. I'm not sure what else might be the
problem. Maybe someone else has an idea.
73,
Tim - N3XX
- Original Message -
From: "N3XX"
To:
Sent: Saturday, May 2
Look in the manual on page 46 - "Filter Loss Compensation".
Following the procedure there should get them equalized for you.
73,
Tim - N3XX
- Original Message -
From: "Richard Haendel"
To:
Sent: Saturday, May 22, 2010 4:28 PM
Subject: [Elecraft] K3 gain changes w
ve tested and have all connected & working.
73,
Tim - N3XX
- Original Message -
From: "N3XX"
To: "Elecraft Reflector"
Sent: Thursday, May 20, 2010 6:18 AM
Subject: [Elecraft] Connections to K3 ant 1 & 2
> Hi to all on the list,
>
> I just finish
to
just operate a switch to make the change.
So, if anyone on the list doing something similar to what I have in mind, I
sure would like to hear about your setup, what kind of switch you are using,
how much port to port isolation is necessary to be safe, etc.
Tnx & 73
nished. I
don't think there was actually any marking I could see anyway.
73,
Tim - N3XX
- Original Message -
From: "David Dunn"
To: "elecraft@mailman.qth.net"
Sent: Sunday, May 09, 2010 4:47 AM
Subject: Re: [Elecraft] [K3} Help, hex key for split knob
>I
35 matches
Mail list logo
