Hello John & the Elecraft Gang,
I have a similar problem with one of my KPOD switches. (I also use the KPOD
for RIT when I'm running in CW and RTTY.) In my case, I have F3 programmed
to toggle in and out of Diversity RX. Tap F3 = DIV; Tap & Hold F3 = clear
DIV. For many years this worked like a
I have several Elecraft cable assemblies for sale. All are new, unused, still
in original Elecraft packaging. All prices include shipping.
KPAK3AUX - $35
CBL-1500IC - $14
CBL-KENSER1500 - $59
CBL-YAE-BKDA15 - $59
I accept Zelle, PayPal (F), and personal checks. If interested, please
FWIW:
Thanks to all who responded to my inquiry about "clean" inverters. Here is a
summary.
While it is unlikely to find any inverter which is 100% rf quiet, some
designs are much better, or worse, than others. These following products are
FCC compliant [Title 47 (CFR), Part 15 Subpart B for Class
OK, I'll make it somewhat Elecraft related... For FD this year I will be
using a KX3 in a 1A Battery effort. To power the KX3 and most of the station
equipment, I will be using a solar-charged battery system that is a
permanent part of my home station.
Begin OT:
However, for some of the
Josep,
Apparently the 100 Watt PA has been disabled. Go to "Config" (Press and hold
MENU), rotate VFO B until you see "KPA3", then rotate VFO A to select "PA
nor."
Remember, it is always a good idea to back up your K3 configuration. Use the K3
Utility to do a Config Backup. If you ever have a
Jim,
You are correct! It is clearly not the same problem. I was trying to correct my
"bad memory" offering from last evening.
Thanks, Jim - WS6X
-Original Message-
From: elecraft-boun...@mailman.qth.net On Behalf Of James Bennett via Elecraft
Sent: Friday, April 01, 2022 3:36 PM
To:
"However, what I'm seeing is that when the amp is in OPER mode, my receive
signal strength drops way, way off to the point I have to go full AF volume
to hear signals. If I put the amp in STBY, signal levels go back to normal."
These exact symptoms have been associated in past reports with a
-Original Message-
From: elecraft-boun...@mailman.qth.net On Behalf Of Fred Jensen
Sent: Sunday, January 30, 2022 4:10 PM
To: Elecraft Reflector
Subject: [Elecraft] What happened to ALC?
I can remember, shortly after SSB appeared on the ham bands that "ALC"
showed up and was immediately
Hi Vic,
I just checked my K3s and the line OT is indeed a stereo signal. My MENU
settings are exactly like yours.
Jim - WS6X
-Original Message-
From: elecraft-boun...@mailman.qth.net On Behalf Of Victor Rosenthal 4X6GP
Sent: Thursday, January 20, 2022 10:02 AM
To: Elecraft Reflector
Sorry for the intrusion. (In my defense, I HAVE used this paddle to key 5
Elecraft radios over the years!)
In my recent move to a new QTH the manual for my P1PAD touch paddle seems to
have taken flight. Does anyone in this group have access to the manual? Would
you please contact me off list?
"When I engage OPER the input signal is attenuated by ~20 dB."
Thanks to all for the prompt and informative replies. Apparently the culprit
has been found. Several reported the exact same issue, one as recently as
one week ago. According to one reply, an Elecraft Tech told him, "This is a
known
I just purchased a used KPA500 (SN 0456) from a close friend. The amp was
just back to the factory for several repairs and was thoroughly tested. The
report reads, "KPA500 #0456 meets or exceeds all factory specifications." My
friend unboxed the amp and made several QSOs to be sure all issues were
Hello Again,
Sorry for being so “mysterious” yesterday. Several of you have written, some
with helpful suggestions, but many being curious about what I thought was
“suspicious” about the KAT500 transaction.
Briefly, I have learned when you place a “WTB:” ad on QTH.com, you often
encounter
Hello,
I have a guy trying to sell me a used KAT500, SN 0296. He sent me an actual
photo with the SN clearly showing. Also in the photo is KPA500 SN 0702.
Something seems suspicious. I did a Google image search, but the results
were inconclusive.
Does anyone in this group own, or has ever owned
The MH2 mic is sold!
Tnx,
Jim - WS6X
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
The KFL3A-400 crystal filter has found a new home.
Tnx,
Jim - WS6X
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This
For Sale:
MH2 - Elecraft Microphone, like new - $45 shipped to the *US.
KFL3A-400 - 400Hz, 8-pole crystal filter by Inrad - $85 shipped to the *US.
*Additional shipping charges to other destinations based on my actual costs.
Please contact me direct, off list for details. I am good in QRZ.
Hi Bernie,
I think the trick is to press and hold the "NTCH" button to enter the manual
notch mode. If you only tap the button, even though the display reads "Manual"
and the icon appears, it is not really in the manual notch mode.
For example, my CW sidetone pitch is set to 560 Hz. If I tune a
Please put me on the list for info about a solution to these K-POD switches.
I have several with the same intermittent behavior.
Thanks,
Jim - WS6X
-Original Message-
From: elecraft-boun...@mailman.qth.net On Behalf Of hawley, charles j jr
Sent: Friday, November 06, 2020 10:55 AM
The K-Board is sold.
Thanks,
Jim - WS6X
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Thought I'd try here before "going public" to the ham classifieds. I have
for sale an essentially unused smart keyboard interface for a K3/K3s:
QRP Works - K-Board K3/K3S Package 2. See the particulars here:
https://www.qrpworks.com/k-board-store.html
This is a very slick package, and
Message: 11
Date: Tue, 28 Jan 2020 12:27:31 -0700 (MST)
From: VernonJ
To: elecraft@mailman.qth.net
Subject: [Elecraft] Dual Receivers 2 different antennas Diversity
receive
Message-ID: <1580239651539-0.p...@n2.nabble.com>
Content-Type: text/plain; charset=us-ascii
My K3S has Main and Sub
22 matches
Mail list logo