Peter,
There is no 'setup' for the AUX 12V output - I think yours is broken.
If you want to make some measurements, take a look at the lower right
corner of RF Board schematic sheet 3. The RFC and resettable fuse are
thru-hole components, so troubleshooting should be easy.
73,
Don W3FPR
On 9/16/2016 12:08 PM, g4...@btinternet.com wrote:
Hi,
I've just hooked up my new hupRF K3 IF buffer to the 12v RCA socket at the rear
of the K3 expecting to see some volts. The buffer requires 12v at 10ma to drive
it. Nothing. Zilch. I've perused the instructions and Freds book but cannot see
if I have to enable this function. Its either that or the socket is defunct. I
put the K3 together about 4 years but have never had the need to use the 12v
RCA output before.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
