with
tinfoil* would help...
cln - Nick
WB5BKL
Lake Buchanan, TX
* One of my neighbors has a plentiful supply.
On 8/24/22 11:49, elecraft-requ...@mailman.qth.net wrote:
Message: 9
Date: Tue, 23 Aug 2022 14:47:24 -0700
From: David Gilbert
To:
Subject: Re: [Elecraft] [K3] KIO3 failure mode
When my
uchanan, TX
* One of my neighbors has a plentiful supply.
On 8/24/22 11:49, elecraft-requ...@mailman.qth.net wrote:
Message: 9
Date: Tue, 23 Aug 2022 14:47:24 -0700
From: David Gilbert
To:
Subject: Re: [Elecraft] [K3] KIO3 failure mode
When my KIO3 got zapped, I had everything disconnected.
>
> cln - Nick
> WB5BKL
> Lake Buchanan, TX
>
> * One of my neighbors has a plentiful supply.
>
>
>
> On 8/24/22 11:49, elecraft-requ...@mailman.qth.net wrote:
>> Message: 9
>> Date: Tue, 23 Aug 2022 14:47:24 -0700
>> From: David Gilbert
>> To
/22 11:49, elecraft-requ...@mailman.qth.net wrote:
Message: 9
Date: Tue, 23 Aug 2022 14:47:24 -0700
From: David Gilbert
To:
Subject: Re: [Elecraft] [K3] KIO3 failure mode
When my KIO3 got zapped, I had everything disconnected.? Antenna and all
accessories from the K3 ... power supply as well.? The
Yep, series mode protectors. Got a few of them. But when tstms threaten,
*everything* gets disconnected from the K3/K4, including headphones, key
and speakers.
73,
Drew
AF2Z
On 08/23/22 18:07, Jim Brown wrote:
On 8/23/2022 2:47 PM, David Gilbert wrote:
If I remember correctly, the laptop po
On 8/23/2022 2:47 PM, David Gilbert wrote:
If I remember correctly, the laptop power supply was even plugged into a
quality surge protected UPS.
MOV Surge protectors short the phase and neutral conductors to the green
wire in the event of a surge. In the event of a strike, the IR drop in
the
On 8/23/2022 2:15 PM, David Gilbert wrote:
That little board seems to have by far the poorest reliability history
of anything in the K3.
I can think of two reasons. First, cable shields are not bonded to the
chassis at the point of entry; instead, they are capacity-coupled, and I
suspect that
ug 23, 2022 5:47 pm
Subject: Re: [Elecraft] [K3] KIO3 failure mode
When my KIO3 got zapped, I had everything disconnected. Antenna and all
accessories from the K3 ... power supply as well. The one thing I didn't have
disconnected was the RS-232 link between the laptop and the KIO3.
Even in Europe (east of the Rockies somewhat...). Got still 2 spares in
the box for my three K3's. There's a reason.
Udo DK5YA
Am 23.08.2022 um 23:05 schrieb Al Lorona:
Ah, lightning. Whoever performs an analysis of the KIO3 failure mode after
being struck by lightning might have what's necess
ical storm)
from the shack hardware makes little boards like the K103 enjoy a
longer life. Just suggesting. No disrespect in this comment.
73
Chuck
W4MIL
-Original Message-
From: David Gilbert
To: elecraft@mailman.qth.net
Sent: Tue, Aug 23, 2022 5:15 pm
Subject: Re: [Elecraft] [K3] KI
-Original Message-
From: David Gilbert
To: elecraft@mailman.qth.net
Sent: Tue, Aug 23, 2022 5:15 pm
Subject: Re: [Elecraft] [K3] KIO3 failure mode
Yes, for sure. That little board seems to have by far the poorest
reliability history of anything in the K3.
Dave AB7E
On 8/23/2022 2:05 PM, Al
Yes, for sure. That little board seems to have by far the poorest
reliability history of anything in the K3.
Dave AB7E
On 8/23/2022 2:05 PM, Al Lorona wrote:
Ah, lightning. Whoever performs an analysis of the KIO3 failure mode after
being struck by lightning might have what's necessary
Ah, lightning. Whoever performs an analysis of the KIO3 failure mode after
being struck by lightning might have what's necessary for a very lucrative
business.
Actually, I'm surprised that the board hasn't already been reverse engineered
in China, enabling an aftermarket for KIO3 replacements.
13 matches
Mail list logo